Duck & Sail provides to you and for your yacht the excellent Morse Lever Controls
delivered straight from our European warehouses. Save your money for fun in the
sun and order Morse Lever Controls on-line with the best price. With passion for the
sea we have selected Morse Lever Controls and other quality products for sailing,
water sports, power boating and various outdoor activities for you to enjoy. Buy Morse Lever Controls now and get your best deal - from sailor to sailor!
Control box, side mount port or starboard, body in ABS, hand lever in anticorodal. Suitable for any outboard motor. Suit cables : C2 – C8 – Mach Zero – 33C, with kit K25 for engines Yamaha, Suzuki, Chrysler, Mariner. Cable C5 and Mach 5 for Mercury motors, without kit. Cable C14 with kit K23 for engines OMC since 1979. Cable C16 for Marine motors without kit...
Stainless Steel wall mount Vetus Sisco single lever control for throttle or shift control. With safety switch which prevents engine starting with engaged gearbox...
Single lever dual action for one engine controls for throttle and gear.Suitable for any type of boats with outboard, inboard and sterndrive equipped for power plants. Enables easy and safe shifting by preventingaccidental gear engagement unless engine is idling. Made of cast and chrome aluminum. Pull-out handle disengages shift for warm engine. Throughthe safety switch X43 art. 4242065 (optional) you get the engine to start only in neutral. Internally fitted with friction. Use the cables C2, C8 ..
Dual Action controls box with trim for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. ..
Top and side mount dual action controls with lever lock device and trim switch for throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the..
Double action wall mount single lever control for throttle and shift control
for inboard engines. Standard equipped on Volvo and Vetus engines.
Uses C2 / C8 / C33 / MACHZero control cables...
Two lever single action control, throttle + shift, bent hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forward..
Dual Action controls box with trim for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim...
Top and side mount dual action controls With lever lock device, hand lever withoutjut for use on sailing bofor throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be d..
Control box, side mount port or starboard, body in ABS, hand lever in anticorodal. Suitable for anyoutboard motor. Suit cables : C2 C8 C7 Mach Zero 33C, with kit K25 forengines Yamaha, Suzuki, Chrysler, Mariner. Cable C4 with kit K24 for enginesJohnson, Evinrude, Selva, Volvo. Cable C5 for Mercury motors, without kit. CableC14 with kit K23 for engines OMC since 1979. Cable C16 for Marine motorswithout kit...
Double action control for inboard, outboard and
stern drive engines throttle and shift control. Available with or
without trim. Uses directly C14 / MACH14 cables or C2 / C8 / MACHZero cables with included K59 kit. C5 / C16 / MACH5 cables can be connected with K60 kit. C22 cable can be connected with K61 kit. C36 / MACH36 cables can be connected with K62 kit.
With optional X12 safety switch (4620112) engine can be started only with disengaged gearbox...
Dual lever control single action, suitablefor any engine with hydraulic gear. Release on gear and adjustablefriction. Wear Cables C2 C7 C8 Mach Zero 33 C.For cable C22 kit k32 art. 4242064...
Dual action control lever throttle and shift in one lever. Suitable for any kind of boat with hydraulic gearbox. Chrome finish. Start and warm-up by pulling out the hand levers in the neutral position. Suits cables : C2 C8 - Mach Zero C22 33C..
Dual action control lever throttle and shift in one lever. Suitable for any kind of boat with hydraulic gearbox. Chrome finish. Start and warm-up by pulling out the hand levers in the neutral position. Suits cables : C2 C8 - Mach Zero C22 33C..
B400 bulkhead control box lever dual action: gas and inverter. Modern and essential design, free of protrusions, which makes themparticularly suitable for use on sailboats. Lever and flange in stainlesssteel 316 for greater resistance to the marine environment. They can bemounted on the bulkhead right or left, horizontally or vertically. Equippedwith adjustable clutch accessible to record the accelerator. By the safetyswitch X41 (optional), the starter motor is only obtained through the inverter..
Single lever control boxes built in chromed brass, for throttle or gearbox.Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables.Dims. mm. A=75 B=160 C=135 D=95 E=75 F=80..
Top and side mount dual action controls with lever lock devicefor throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the neutralposition...
Double action control for inboard, outboard and
stern drive engines throttle and shift control. Available with or
without trim. Uses directly C14 / MACH14 cables or C2 / C8 / MACHZero cables with included K59 kit. C5 / C16 / MACH5 cables can be connected with K60 kit. C22 cable can be connected with K61 kit. C36 / MACH36 cables can be connected with K62 kit.
With optional X12 safety switch (4620112) engine can be started only with disengaged gearbox...
Two lever single action control, throttle + shift straight hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forw..
B310B bulkhead Control box lever dual action: gas and inverter. Suitable for any kind of boat with outboard motor, inboard, and sterndrive,makes driving easy and safe. For side wall mounting either rightof left, horizontally or vertically. Equipped with clutch to regulate thethrottle, adjustable from the outside. Pulling-out handle disengages theinverter during the heating operation of the engine. By the safety switchX12 (optional), the starter motor is only obtained through the inverterin the n..
Dual action single lever for throttle and hydraulic gearbox. Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5 and C16 need kit K35 art. 4242069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting...
Dual Action controls box for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all c..
Push-Pull stay rod flush mount or on bracket art. 4242900. Ideal for Throttle, stop engine, fuel valves, etc. Thread length 5 mm. Tube Ø mm. 14 Length 120 mm. Cables used C2 Mach Zero C7 C8 33C..
Dual Action controls box with trim for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. ..
Dual Action controls box for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all ca..
Two lever single action control, each lever controls separately the throttle or the gearbox cable. Flushmount makes them particularly suitable for flying bridge where ismore seawater splash. Built in die-cast varnished light alloy. Ergonomicsoft handle. Friction built in on the throttle lever. Release on thegearbox lever to know the right position of forward, neutral, reverse.Friction and release are adjustable from exterior. Safety switch C12(optional) allows starting only with gear in neutral ..
Dual Action controls box for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all c..
Dual Action controls box for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all ca..
Dual action single lever for throttle and hydraulic gearbox. Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5 and C16 need kit K35 art. 4242069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting...
Flushed top mount twin lever control for throttle and shift control.
Uses C2 / C8 / C33 / MACHZero cables. C22 Heavy-duty cables can be used with K32 connection kit (4620032). With the optional safety switch X12 (4620112) the engine can be started only with gearbox disengaged...