-
Your shopping cart is empty!
Your shopping cart is empty!
Bestseller
Compact anemometer-thermometer with electronic compass, pressure and altitude functions featuring wind speed measurement in km/h, mph, m/s, fps and knots. Balanced instant windspeed, maximum windspeed, temperature measuring (range: -40°C to 80°C). It calculates the wind chill factor. Absolute pressure, relative pressure with calibration, weather forecast with barometric pressure tendencies and altitude with calibration definition. With backlight...
142.03€ Ex Tax: 114.54€
Compact design 150N life vest with adjustable strap for a snug fit, reflective patches and whistle included. EN ISO 12402-3 certified for pleasure navigation over 6 miles from coast. 150N - For offshore use even for unconscious people...
26.24€ Ex Tax: 21.16€
Compact diving knife with line cutter. Complete with sheath and belt. Stainless Steel W1.4028 blade. Blade should be rinsed with fresh water and greased after use...
24.50€ Ex Tax: 19.76€
Compact valve with ergonomic cap for inflatables and high pressure inflatable floors. With push opening and special high sealing capacity gasket...
13.05€ Ex Tax: 10.52€
Compass Olympic 115, apparent Ø mm. 81. Card with graduation every 5th, for sailboats from 6 to 12 meters, standard lighting 12-24 V LED. Recessed installation on horizontal or binnacle (optional). SOLAS-MED 96/98 approval..
184.77€ Ex Tax: 149.01€
Stainless steel AISI 316 deck hinge with screw, fixing on tube..
10.16€ Ex Tax: 8.20€
Compass Contest 101 Ø apparent mm. 100. Red card with 5 ° white graduation, for sailboats over 9 meters. Double reading on the cockpit and cab side. Standard lighting 12-24 V. LED. Provided with inclinometer. Recessed installation on vertical bulkhead or on the shaft (with optional shaft kit)..
190.93€ Ex Tax: 153.97€
Top and side mount dual action controls with lever lock device and trim switch for throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the..
325.71€ Ex Tax: 262.67€
Courtesy light 7 white LED with one or two selectable light sources. One piece body with resin. Suitable for illuminating steps, edges, ladders, manholes, hatches, etc.. Voltage 12V...
57.11€ Ex Tax: 46.06€
Courtesy light made of stainless steel AISI 316, Ø external mm. 153, cut-mm. 80, recessedmm. 25. The switch incorporates a LED to locate in the dark. Complete with bulb 10 W, 12V art. 4040962..
33.23€ Ex Tax: 26.80€
Cover Life-ring (art. 1010004) With Integrated Zippered Bag To Old The Safety Equipment Or Other Accessories..
34.59€ Ex Tax: 27.89€
Deck showers with ABS white body and ASA white cover complete with plastic white shower. Snap closure and stop system in the desired position of the cap once opened. Hose length mt. 3...
42.37€ Ex Tax: 34.17€
Cummins engine (16x50mm) pencil anodes...
51.00€ Ex Tax: 41.13€
Curved brush with Brass-plated bristles and Plastic handle...
3.51€ Ex Tax: 2.83€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied simple or with marine-treated leather cover and Dyneema stitching. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
512.14€ Ex Tax: 413.02€
Ready to use dock braid line with hand pre-spliced and finished Stainless Steel thimble. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
239.00€ Ex Tax: 192.74€
Ready to use dock braid line with hand pre-spliced and finished Stainless Steel thimble. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
310.88€ Ex Tax: 250.71€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
443.86€ Ex Tax: 357.95€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
518.97€ Ex Tax: 418.52€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
562.22€ Ex Tax: 453.40€
Ready to use dock braid line with hand pre-spliced and finished Stainless Steel thimble. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
262.96€ Ex Tax: 212.06€
Ready to use dock braid line with hand pre-spliced and finished Stainless Steel thimble. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
340.86€ Ex Tax: 274.89€
Red painted end wooden handle. Pure professional dark bristles with 15 mm thickness and 90% fullness...
7.91€ Ex Tax: 6.38€
Deck filler in chromed brass with key lock, for hose Ø mm.60..
87.01€ Ex Tax: 70.17€
Mirror polished die cast stainless steel AISI 316 deck filler. Perfectly flat, with safety wire and push-up spring. To open push and turn theplug. Fastening with bolts..
52.12€ Ex Tax: 42.03€
Gray and waste water plastic tankcomplete of outboard emptying sistem with self-priming pump for emptying JABSCO 12V, capacity 19 lt/min, inlet/outlet hose Ø mm. 38...
740.20€ Ex Tax: 596.93€
Gray and waste water plastic tankcomplete of outboard emptying sistem with self-priming pump for emptying JABSCO 12V, capacity 19 lt/min, inlet/outlet hose Ø mm. 38...
757.72€ Ex Tax: 611.07€
Diesel and gasoline engine ignition switch with rubber cap. Brass body, diameter 45 mm. 4 Terminals - 4 Positions...
32.62€ Ex Tax: 26.30€
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
260.72€ Ex Tax: 210.26€
Disassembling Anodized Aluminum kayak paddle with reinforced Plastic blades...
57.46€ Ex Tax: 46.34€
Diving knife with line cutter and shackle opener. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
32.81€ Ex Tax: 26.46€
Diving Knife With Sheath. Coloured Handle. Stainless Steel Blade, Total Length Mm.190, Blade Length Mm.90..
24.44€ Ex Tax: 19.71€
Diving Knife With Sheath And Hammer, Coloured Handle, Stainless Steel Blade, Total Length Mm.310, Blade Length Mm.185..
65.99€ Ex Tax: 53.22€
Diving Knifewith Sheath, Coloured Handle, Stainless Steel Blade, Total Length Mm.270, Blade Length Mm.140..
45.45€ Ex Tax: 36.65€
Compact gas cooker with 28 Lt oven and 2 burners. Complete with panholders, safety door lock and safe ignition system. Very easy flame and temperature control. Power: oven 1100W - burners 1800/2200W. H = Height W = Width L = Length..
1,362.94€ Ex Tax: 1,099.15€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel swiveling top and shackle. The high quality materials guarantee high work loads and extra lightness...
320.88€ Ex Tax: 258.78€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel swiveling top and shackle. The high quality materials guarantee high work loads and extra lightness...
256.97€ Ex Tax: 207.23€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel swiveling top and shackle. The high quality materials guarantee high work loads and extra lightness...
341.31€ Ex Tax: 275.25€
Double flange rudder/hull anodes with screws...
50.34€ Ex Tax: 40.60€
Double flange rudder/hull anodes with screws...
16.60€ Ex Tax: 13.39€
Double flange rudder/hull anodes with screws...
27.41€ Ex Tax: 22.10€
Double outlet drain fittings with inspection cap for 40 mm hole sinks...
34.07€ Ex Tax: 27.47€
IP55 12V-16A Waterproof rocker switches with LED light and labels...
9.49€ Ex Tax: 7.65€
Block double swiveling for high load, Ø Pulley mm. 100 Ø Shackle mm. 10 ØRope mm. 16 Max work load kg. 3400 Break load 6800..
1,650.04€ Ex Tax: 1,330.67€
Block doube swiveling for high load, Ø Pulley mm. 60 Ø Shackle mm. 8 ØRope mm. 12 Max work load kg. 1800 Break load 3600..
443.54€ Ex Tax: 357.69€
Block double with becket and swiveling for high load, Ø Pulley mm. 80 Ø Shackle mm. 10 ØRope mm. 14 Max work load kg. 2400 Break load 4800..
1,142.98€ Ex Tax: 921.75€
Block double swiveling for high load, Ø Pulley mm. 60 Ø Shackle mm. 8 ØRope mm. 12 Max work load kg. 1800 Break load 3600..
407.94€ Ex Tax: 328.99€
Block double with becket and swiveling for high load, Ø Pulley mm. 80 Ø Shackle mm. 10 ØRope mm. 14 Max work load kg. 2400 Break load 4800..
1,096.70€ Ex Tax: 884.43€
Plain bearing HS blocks for sheets up to 10 mm. Stainless Steel cheeks and plastic sheave. Sheave diameter 36 mm. Breaking load 850 Kg. Swivel head is mounted on fixed blocks to make them swivel...
50.60€ Ex Tax: 40.81€
High Resistance S.s. Mooring Springs With Silencer Disks And Lengthening Limiter. Wire Ø Mm. 12, Spring Ø Mm. 91, Length. Mm. 470, For Boats Up To 16 Meters Or 12 Tonnes, Breaking Load Kg. 6200...
244.65€ Ex Tax: 197.30€
