Stainless steel bar for dual cylinder UC128-OBF. Need order onecylinder with side arm on right and one on left. Suitable for engineswith base between 550 and 950 mm...
Wear one cable M66 like T71FC, but anti-feedback mechanism. Stainless steel cable end. Meets ABYC P17 standards. Seawater corrosion resistant. Particularly suitable with low space behind dashboard. 90° or 20° Bezel. With or without friction brake. 4 turns lock-to-lock. Cable stroke 228 mm. Max. wheel diameter 406 mm. Min. cable radius 200 mm. Norske Veritas approved. Suitable for boats with outboard, inboard, sterndrive motor...
Adjustable steering wheel systems X 72, tilt range of 60° and five locking positions, suitable on front mount helms. For pump UP25F, UP28F, UP33F, UP39F,UPF45F and Silversteer..
Portable automated equipment for filling and bleeding of hydraulic systems contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. Possible to connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of:- unit equipped with a safety valve, switch, 5 liter tank and electric motor 12V 8A.- electric cable mt. 4 full clips for connecting to the battery...
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
Two lever single action control, throttle + shift straight hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forw..
Top and side mount dual action controls with lever lock device and trim switch for throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the..
B400 bulkhead control box lever dual action: gas and inverter. Modern and essential design, free of protrusions, which makes themparticularly suitable for use on sailboats. Lever and flange in stainlesssteel 316 for greater resistance to the marine environment. They can bemounted on the bulkhead right or left, horizontally or vertically. Equippedwith adjustable clutch accessible to record the accelerator. By the safetyswitch X41 (optional), the starter motor is only obtained through the inverter..
Dual Action controls box with trim for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim...
Nautech steering systems spare parts and accessories.Spare parts: cylinders and pumps.Accessories: X64 pump flush flange, steering wheel position adjustment system X72, dual outboards connection A94 tie bar, bulkhead R8W double hydraulic hose.The steering wheel position adjustment system X72 (Cod MTM 4655530) for Nautech steering pumps and SilverSteer steering pumps allows 5 different driving positions for a total angle of 60°.The dual outboards connection A94 (Cod MTM 4655055) tie bar is used w..
Compact, axial pistons. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4 tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4 NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position...
Front mount helm pumps. Compact, axial pistons. Lock valve for positive rudder lock. Relief valve for over-pressure protection. 3/ 4 tapered stainless steel shaft. Cast iron cylinder rotor for greater durability. Wear 1/ 4 NPT fittings, complete with elbow fittings. Possible to install the pump in an intermediate dashboard position...