-
Your shopping cart is empty!
Your shopping cart is empty!
316 Stainless Steel swivel snap shackle with clevis pin. Used for the spinnaker's or jib's sheets and halyards. In case of spliced halyards, the shackle pin can be easily replaced if worn out...
9.78€ Ex Tax: 7.89€
Aifo-Fpt heat exchangers anodes..
10.82€ Ex Tax: 8.73€
Anode for outboard motors O.M.C 50-60-70-90-140 HP EVINRUDE 50-140-200 HP (ref.or. 393023 - 436745)..
9.02€ Ex Tax: 7.27€
Ball bearing Master blocks with 75 mm sheave. Ultra light UV resistant fiber reinforced composite material case. The swivel shackle can be positioned in two directions thanks to the block lever. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
179.22€ Ex Tax: 144.53€
Ball bearing Master blocks with 75 mm sheave. Ultra light UV resistant fiber reinforced composite material case. The swivel shackle can be positioned in two directions thanks to the block lever. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
374.94€ Ex Tax: 302.37€
Ball bearing Master blocks with 75 mm sheave. Ultra light UV resistant fiber reinforced composite material case. The swivel shackle can be positioned in two directions thanks to the block lever. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
247.09€ Ex Tax: 199.26€
Bellows cable STERN DRIVEOriginal reference: 23-30617A2 / 74639 / 74639A2..
13.39€ Ex Tax: 10.80€
Cable steering bellow Slot without fasteners...
7.39€ Ex Tax: 5.96€
Strong fleece Fendress fender covers for Mega Fender fenders. Protects Mega Fenders eliminating wear, scuffy marks and squeaks. Soft and tough, they don't stain the sides and they last longer...
148.25€ Ex Tax: 119.56€
Brass flush mount square lifting handle. Square grip...
12.90€ Ex Tax: 10.40€
Brass indoor or outdoor light, transparent glass...
137.13€ Ex Tax: 110.59€
Brass flush mount square lifting handle. Square grip...
11.73€ Ex Tax: 9.46€
Collar trasmission bellowSterndrive/CobraOriginal reference: 912374-1..
21.29€ Ex Tax: 17.17€
Strong fleece Fendress fender covers for Mega Fender fenders. Protects Mega Fenders eliminating wear, scuffy marks and squeaks. Soft and tough, they don't stain the sides and they last longer...
148.25€ Ex Tax: 119.56€
Handle made of heat treated, drawn anodized aluminum for extra strength. Stainless Steel locator button locks handle in position. Comfortable hand grip...
61.59€ Ex Tax: 49.67€
Start and services batteries, zero maintenance, reliability in all weather and an extraordinary power for high absorption. Immediately ready to go, longer life, technology CA100. Safety lid with flame arrestor, central degassing. Dim. mm. 278x175x190..
284.32€ Ex Tax: 229.29€
Genuine Mercruiser 99746A17 exhaust manifold complete with gasket. Fits 4.3L/LX engines. To be completed with 6 screws...
465.08€ Ex Tax: 375.07€
White Plastic body medium size navigation lights. Dimensions: 58 X H74 mm...
14.50€ Ex Tax: 11.69€
Series F cylindrical fenders for small, medium and large boats. Thick walls, two reinforced hook holes, blue cap. Also suitable as towing rollers (model F4-F6)...
54.44€ Ex Tax: 43.90€
Mega Fender inflatable fenders designed to protect large boats and mega yachts. Great lightness and great ease of handling, while their particular valve and their high flexibility allow to be easy deflated and to be rapidly stored (can fit in tight spaces). Very sturdy, made of Kevlar thread with strenghtened strips. Traction Stainless Steel strap rings...
364.37€ Ex Tax: 293.85€
Flush pull handle in polished brass. Size: mm. 74x50x8 h...
18.97€ Ex Tax: 15.30€
Cable steering bellow Slot without fasteners...
9.85€ Ex Tax: 7.95€
Hinge with AISI 316 cover. Fastening screws can be hidden by the bi-adhesive tape 3M VHBput on the cover, with great aesthetic effect. Dim. mm. 74 x 75...
27.53€ Ex Tax: 22.20€
IP67 watertight Plastic case stern LED navigation light. Meets CE/IMO/COLREG 72/ABYC/NMMA requirements. Dimensions: 74 x 62 mm. ..
31.75€ Ex Tax: 25.60€
Complete link arm Johnson Evinrude for M55...
143.29€ Ex Tax: 115.55€
Strong fleece Fendress fender covers for Mega Fender fenders. Protects Mega Fenders eliminating wear, scuffy marks and squeaks. Soft and tough, they don't stain the sides and they last longer...
148.25€ Ex Tax: 119.56€
Martyr Aluminum M2 alloy anodes for Mercruiser stern drive engines. • Protect 50% longer than traditional zinc anode • Weigh 50% less than traditional zinc anodes ..
26.09€ Ex Tax: 21.04€
Mirror polished AISI 316 Stainless steel hinges. Mirror polished hinges Stainless steel. Thickness mm. 2, pin Ø mm. 9. Size: mm. 74x40..
9.73€ Ex Tax: 7.85€
Mirror polished AISI 316 Stainless steel hinges. 2, pin Ø mm. 9. Size: mm. 74x40..
9.73€ Ex Tax: 7.85€
Mirror-Polished Stainless Steel big covered bisquit shaped hinge...
11.46€ Ex Tax: 9.25€
Dual Action controls box for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all c..
590.95€ Ex Tax: 476.57€
Navigation lights R.I.Na. approvalIn polycarbonate, UV rays resistant, protection grade IP56, complete with Rina certificate and 12 V. bulb...
12.72€ Ex Tax: 10.26€
Dim oil filter. Ø Ø 106 mm gasket est.mm. 102 height mm. 160 step motor 1 1/8-16 UNF TAMD61 in REF. or. 466634.3, TAMD62A-TAMD63P-A-L-A Rep or. 847741.6, TAMD71A-TAMD71 B-TAMD72A-TAMD72P-A-TAMD73P-ATAMD73WY-A-TAMD74P-A Rep or...
34.04€ Ex Tax: 27.45€
OMC Cobra engine cube anode. Zn = ZincAl = Aluminum..
13.06€ Ex Tax: 10.53€
Chromed Brass bulkhead oval lamp with two fixing holes and sand-blasted glass. Endowed with eyeshade that spreads light mainly downwards. E27-220V bulb holder. IP54 protected...
174.61€ Ex Tax: 140.81€
Flush pull handle in polished brass. Size: mm. 92x63x9 h..
11.78€ Ex Tax: 9.50€
Black Plastic body medium size navigation lights. Dimensions: 58 X H74 mm...
13.05€ Ex Tax: 10.52€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
21.35€ Ex Tax: 17.22€
REF. 17461-92D02 or. 8-9 Miscellaneous 93901/.9 HP to dim. Ø int.mm. 12.3 Ø 20 mm thick est.mm. 42, nr. 6 paddles..
15.06€ Ex Tax: 12.15€
REF. or -15-17461 93902 9.9 Miscellaneous. hp and 4T for DF 9.9 -15, dim. Ø est.mm Ø 13.2 mm thick int.mm. 42.22., nr. 6 paddles..
15.89€ Ex Tax: 12.82€
REF. 94700 17461-95201 or./40-50-60-65 for DT miscellaneous, dim. Ø int.mm. 19 mm thick est.mm Ø 17.1.67, 6 paddles..
20.94€ Ex Tax: 16.89€
REF. 95301/95300/17461-95501. for DT-miscellaneous 50-60-75-85, dim. Ø int.mm. 19 mm thick est.mm Ø 20.1.67.5, nr. 6 paddles..
20.94€ Ex Tax: 16.89€
REF. or 17461-96301/motor 2T 96312. DT 20-25-30-35-40, 4T DF 25-30-40-50, dim. Ø int.mm Ø est.mm 17.1.4 mm-thick 67.5.16.18, nr. 6 paddles..
20.94€ Ex Tax: 16.89€
Rubber covered fabric grey water flexible tanks. Complete with 22,5 mm dia threaded cap with non-return valve...
62.60€ Ex Tax: 50.48€
Rubber covered fabric grey water flexible tanks. Complete with 22,5 mm dia threaded cap with non-return valve...
71.82€ Ex Tax: 57.92€
Professional heavy duty collar clamp with more than 5 times coupling retention of standard clamps. 316 Stainless Steel band, screw and nut...
15.29€ Ex Tax: 12.33€
Professional heavy duty collar clamp with more than 5 times coupling retention of standard clamps. 316 Stainless Steel band, screw and nut...
9.09€ Ex Tax: 7.33€
Stainless Steel AISI 304, for heavy duty use to clamp high diameter hard hoses...
12.93€ Ex Tax: 10.43€
Equipped with combined 12V or 24V pump for disposal and flushing. Centrifugal pump with macerator function for disposal and an impeller pump for filling water. Available in three models: Super Compact, Compact and Comfort...
448.18€ Ex Tax: 361.44€
