Chromed brass mixer for sink with dynamic flow regulator. Anti-lime ventilator and 11/4 push with Widd (Water Immersion Dry Disc) technology: it allows the water to reach the top of the mixer from the external of the cartridge profile, this sort of bypass prevents the deposit of limestone inside the cartridge, which in the long run, it could cause inaccuracies in mixing or breaking the platelets. Water Saving: by wich there is a substantial reduction in water consumption, thanks to a dynamic fl..
The BRS SYSTEM KIT2N is designed for protection from sinking and fire of the small open boats.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT2N is 1700 litres. The weights of the displaced water (two bags) is 1700 kg. The average filling time of the one bag is 30 secs. Operation time for filling two bags and attaching the net on the boat is ~5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 lit..
The BRS SYSTEM KIT4 is designed for protection from sinking and fire of small boat up to 8 m long with a cabin.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT4 is 3400 litres. The weights of the displaced water (four bags) is 3400 kg. The average filling time of the one bag is 30 secs. Operation time (filling four bags) is 5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 litres.The BRS SYSTEM ..
The BRS SYSTEM KIT6 is designed for protection from sinking and fire of small boat up to 11m long with a cabin.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT6 is 5100 litres. The weights of the displaced water (6 bags) is 5100 kg. The average filling time of the one bag is 30 secs. Operation time (filling four bags) is 5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 litres.The BRS SYSTEM KIT..
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
Length Mt.20 Ø 14x16, Complete With Tap Connector 3/4, 1/2 Standardquick Coupling, Quick Coupling With Stopping The Flow And Adjustable Trigger Spray..
The Britany in highly resistant galvanized steel is the only one still flat chest without articulation, so do not present any risk of blockage due to the meltclogging by silt and stones, also ensures an instant outlet.Recommended for tender. Weight Kg.2 Overall dimensions mm A.406 B.185 Hole Ø10..
The Britany in highly resistant galvanized steel is the only one still flat chest without articulation, so do not present any risk of blockage due to the meltclogging by silt and stones, also ensures an instant outlet.Recommended for boats up to 7,50 meters. Weight Kg.10 Overall dimensions mm A.732 B.347 Hole Ø14..
The Britany in highly resistant galvanized steel is the only one still flat chest without articulation, so do not present any risk of blockage due to the meltclogging by silt and stones, also ensures an instant outlet. Recommended for boats up to 7,50 meters. Weight Kg.12 Overall dimensions mm A.786 B.347 Hole Ø14..
Bumpers designed for application on poles and mooring posts. Due to its plasticstructure wraps the entire pole making safe the docking maneuvers. Itcan also be used as a coating of the walls of tanks hauling of reduced dimensions.Fixing performed with three clamps (25mm x 1000) includedin the package. Suitable for boats with a maximum length 20 meters or60 tons. Dim. mm. 800 x 450 x 30. Weight. 1.3 kg...
Gas detector MTCO senses the presence of carbon monoxide in the air. An acoustic signal indicates the presence of gas in the air before it takes effect on people in the cabin of small boats. Carbon monoxide is a poisonous gas produced by incomplete combustion of any fossil fuel. It is odorless, tasteless and colorless and can leak from pipes, cooking stoves and heating systems not perfectly maintained or damaged. Each sensor is tested and calibrated with the reference gas. Power supply 12V. Dim...
Cup or can holder in chromed brass with two rings fromdiameter of 70 mm in satinized polycarbonate adjustable to 360 ° andanti-vibration spring locking tab..
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
Iceboxes XTREME MARINEmade of polyethylene keeps ice longer, thanks to two centimeters of insulation. Equipped with external coating against yellowing caused by UV raysand cover with cup holders. For their strength can also be used as a seat. They come complete with handles and drain valve. Compliant with FDArequirements. Color White...
Iceboxes XTREME MARINEmade of polyethylene keeps ice longer, thanks to two centimeters of insulation. Equipped with external coating against yellowing caused by UV rays and cover with cup holders. For their strength can also be used as a seat. They come complete with handles and drain valve. Compliant with FDA requirements. Color White...
Iceboxes XTREME MARINEmade of polyethylene keeps ice longer, thanks to two centimeters of insulation. Equipped with external coating against yellowing caused by UV raysand cover with cup holders. For their strength can also be used as a seat. They come complete with handles and drain valve. Compliant with FDArequirements. Color White...
These injection moulded skis with foam lined adjustable bindings are supremely versatile and can be used as either combo skis or entry level slalom skis.Its tunnel bottom and wider tip profile make for a superb entry level combo. Dim. 170 cm, color Blue...
Offshore compass 105 Apparent Ø mm. 91. Rose with graduation every 5 °, for motor boats from 5 to 9 meters, standard lighting at 12-24 V LED. Retractable protective cover in three sliding parts. Horizontal recessed installation or on bracket with the appropriate kit...
Compass Offshore 95 apparent Ø mm. 81. Rose with graduation every 5 °, for motor boats from 6 to 10 meters, standard lighting at 12-24 V LED. Installation on a bracket on a horizontal or vertical plane..
Kiel deck floodlightfor flexible mast-mounting. High quality, impact and shock resistant plastic. Non-corrosive, non-magnetic, seawater resistant, waterproof IP67.With 3 LED (5W) with prismatic lenses for increased brightness and brilliance. Voltage 10-30V with protection for possible reversal of polarity...
Deck Brush Designed To Quickly And Effectively Clean Specific Areas Including Paint, Fiberglass, Polished Metal, General-purpose Cleaning And Even Rugged Surfaces Like Teak, Non-skid Decks And Canvas. Works With The Quick Release System. Dims. Mm. 240x155x85. Blu Colour, Extra Soft. For Varnished And Scratch-sensitive Surfaces. Do Not Use With Chemicals...
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
Double action Bravo 110 hand pump inflator with valve adapters, pressure gauge, filter, enlarged base and ergonomic handle. Can inflate and deflate, endowed with switch for single action to reduce force and reach high pressures...
Manufactured from stainless steel AISI 316. It orients the anchor in the correct position when the attack reaches the pulley of the bow. Direct connection to the anchor and chain with a universal joint. Its resistance has tripled compared to existing models. Assembled with safety screws by unscrewing the pin. Breaking load Kg.12000 overall dimensions mm. Ø.38 A.240 B.27 C.15 D.35. Recommended for anchors 30 to 50 Kg..
Manufactured From Stainless Steel Aisi 316.it Orients The Anchor In The Correct Position When The Attackreaches The Pulley Of The Bow. Direct Connection To Theanchor And Chain With A Universal Joint. Its Resistance Has Tripled Compared To Existing Models. Assembled With Safety Screws By Unscrewing The Pin. Breaking Load Kg.8500 Overall Dimensions Mm. Ø.38 A.230 B.22 C.15 D.30. Recommended For Anchors 20 To 30 Kg...