12/24V high pressure circulation pumps design to meet the demands for heating and cooling systems on boats, trains, buses, commercial vehicles, recreational vehicles and motorhomes.
Small footprint pumps, magnetically driven in order to withstand dry running, with a higher IP classification for a reliable functioning in toughest enviroments...
Bronze self-priming pumps, neoprene rotors, to be connected to the motor (substitute for PM 34). Inputs 3/4, Capacity It./min. 18/49. Spare impeller art. 2727105..
The feature is to have a bypass valve that guarantees a constant quiet flow even at low flow rates, avoiding accumulator tanks. Soft rubber supports to minimize noiseand vibrations. It can run dry without being damaged. CompliesISO 8846 MARINE (ignition protection). Quick coupling.With pressure switch. Self priming up to 3 m., Out Ø mm. 13...
12/24V high pressure circulation pumps design to meet the demands for heating and cooling systems on boats, trains, buses, commercial vehicles, recreational vehicles and motorhomes.
Small footprint pumps, magnetically driven in order to withstand dry running, with a higher IP classification for a reliable functioning in toughest enviroments...
12/24V high pressure circulation pumps design to meet the demands for heating and cooling systems on boats, trains, buses, commercial vehicles, recreational vehicles and motorhomes.
Small footprint pumps, magnetically driven in order to withstand dry running, with a higher IP classification for a reliable functioning in toughest enviroments...
12/24V high pressure circulation pumps design to meet the demands for heating and cooling systems on boats, trains, buses, commercial vehicles, recreational vehicles and motorhomes.
Small footprint pumps, magnetically driven in order to withstand dry running, with a higher IP classification for a reliable functioning in toughest enviroments...
Diaphragm up to 2,4 meters self-priming ColFlo freshwater pumps for sinks and showers. Complete with strainer, 3/4" threaded click fittings and 14 mm pipe-to-hose click fittings (Midi) (20 mm Maxi)...
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
Corrosion, electrolysis and fuel resistant bilge pumps.Of rugged construction, they produce high capacityoutput with the convenience of many mounting positions(see drawings). Hose diameter Ø mm. 38. Maximum lift mt. 3. Spare diaphragm art. p16217..
Flexible impeller pumps self priming suitable for multiple uses also on commercial boats, for tank refuelling, deck wash, water pressure systems, etc. Body in bronze, impeller in neoprene, stainless steel shaft...
Heavy duty bronze pumpsat side liquid ring, stainless steel AISI 316 shaft, impeller in bronze. Sel f priming up to 6 m. Suitable for water, oil, diesel, etc. permanent service...
The five chamber Aqua Jet Water Pressure Pump "WPS" series provides a reliable heart for
small boat and recreational vehicle water pressure systems. Compared to conventional three or
four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water
pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank.
Always use a PUMProtector inlet strainer before the pump intake. Pressure Cut Off: 2.8 bar / 41 psi...
The five chamber Aqua Jet Water Pressure Pump "WPS" series provides a reliable heart for
small boat and recreational vehicle water pressure systems. Compared to conventional three or
four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water
pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank.
Always use a PUMProtector inlet strainer before the pump intake. Pressure Cut Off: 2.8 bar / 41 psi...
The five chamber Aqua Jet Water Pressure Pump "WPS" series provides a reliable heart for
small boat and recreational vehicle water pressure systems. Compared to conventional three or
four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water
pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank.
Always use a PUMProtector inlet strainer before the pump intake. Pressure Cut Off: 2.8 bar / 41 psi...
The whisper quiet self-priming Aqua Jet Flow Master WPS 5.0 pump incorporates state-of-the-art
electronics to automatically control pump speed. The digital controller adjusts water flow as the
demand is increased and decreased while maintaining a very smooth flow. The unique variable flow
feature of the Aqua Jet Flow Master WPS 5.0 pump makes it a smart choice for better flow, lower
noise and less amp draw. PUMProtector Inlet Strainer included. Recommended to install with an
accumulator tank. P..
The whisper quiet self-priming Aqua Jet Flow Master WPS 5.0 pump incorporates state-of-the-art
electronics to automatically control pump speed. The digital controller adjusts water flow as the
demand is increased and decreased while maintaining a very smooth flow. The unique variable flow
feature of the Aqua Jet Flow Master WPS 5.0 pump makes it a smart choice for better flow, lower
noise and less amp draw. PUMProtector Inlet Strainer included. Recommended to install with an
accumulator tank. P..
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. The benefit is less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar /12 psi.
Volume 2 l, height 315 cm, ø 160 mm, weight 1,2 kg...
Stainless steel expantion tank for autoclaves pumps. Reduces the frequency of engagement and disengagement by reducing the current consumptionand the wear of the pump capacity lt. 2.1, fittings 1/2 gas...
Stainless steel flangerecessed for adaptation pumpsart. 4344109/10/14 MTP from the old model tothe new model HTP. Can also be used to installthe pump in the retracted position of 38 mm.Comes with 4 stainless steel bolts for assembly...
Panel for electric bilge pumps in anodised light alloy. Switch tilting with LED AUTOMATIC-OFF-MANUAL light with automatic return to manual position. 12V power supply. Dim. Mm.90x50..
Water pressure pump designed with the new Diamond technology that allows the pump to directly monitor the flow of water while maintaining itconstant according to the requirements thanks to its new variable speed unit and to automatically diagnose any drops or voltage increases, stopping the operation of the pump itself to protect it from any problems thus allowing on-board systems to operate at maximum efficiency. Dim. Length mm. 251 X wide mm. 156 X mm...
Water pressure pump designed with the new Diamond technology that allows the pump to directly monitor the flow of water while maintaining itconstant according to the requirements thanks to its new variable speed unit and to automatically diagnose any drops or voltage increases, stopping the operation of the pump itself to protect it from any problems thus allowing on-board systems to operate at maximum efficiency. Dim. Length mm. 251 X wide mm. 156 X mm...