-
Your shopping cart is empty!
Your shopping cart is empty!
Remote control cables for Mercury/Mercruiser outboard and stern drives engines...
71.50€ Ex Tax: 57.66€
Chromed Brass flag staff with Clamp-on socket for tubing ø 20<>25 mm...
31.50€ Ex Tax: 25.40€
Plastic cable steering bellow with rubber cap..
7.39€ Ex Tax: 5.96€
High efficiency and flexibility cables, MachZero (like cable C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm...
75.60€ Ex Tax: 60.97€
High efficiency and flexibility cables, MachZero (like cable C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm...
87.43€ Ex Tax: 70.51€
High efficiency and flexibility cables, MachZero (like cable C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm...
93.38€ Ex Tax: 75.30€
Cables 33Cideal for most marine applications. The core is a stainless steel bard. 1,9 mm. Exterior cover of extruded plastic resistant to abrasion,seawater and usual solvents. Terminals, hub and core are in stainlesssteel. Coupling-box is in nickel plated brass. Fitted with proper gaskets...
72.52€ Ex Tax: 58.48€
High efficiency and flexibility cables, MachZero (like cable C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm...
153.25€ Ex Tax: 123.59€
Control cable - Ø 7 for OMC motors since 1979, stroke 75 mm...
66.52€ Ex Tax: 53.64€
Control cable - Ø 7 for OMC motors since 1979, stroke 75 mm...
49.27€ Ex Tax: 39.74€
Control cable - Ø 7 for OMC motors since 1979, stroke 75 mm...
59.13€ Ex Tax: 47.68€
Control cable - Ø 7 for OMC motors since 1979, stroke 75 mm...
62.82€ Ex Tax: 50.66€
High efficiency and flexibility cables, Mach14 (like cable C14) To be used on Johnson, Evinrude, OMC engines since 1979 up today. Stroke 75 mm..
123.18€ Ex Tax: 99.34€
High efficiency and flexibility cables, MachZero (like cable C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm...
105.93€ Ex Tax: 85.43€
Control cable - Ø 7 suitable for Mercury, Mercruiser, Mariner Series GENERATION II, stroke 85 mm...
49.27€ Ex Tax: 39.74€
Chromed Brass top mount twin-lever single-function control with 2 cables for throttle or shift control. Uses C2 / C8 / C33 / MACHZero cables...
302.43€ Ex Tax: 243.90€
Chromed Brass wall mount single lever control for throttle or shift control. Uses C2 / C8 / C33 / MACHZero cables...
71.40€ Ex Tax: 57.58€
Dual action control lever throttle and shift in one lever. Suitable for any kind of boat with hydraulic gearbox. Chrome finish. Start and warm-up by pulling out the hand levers in the neutral position. Suits cables : C2 C8 - Mach Zero C22 33C..
644.78€ Ex Tax: 519.98€
Control cable - Ø 10 designed for heavy duty use on inboard and sterndrive engines through L series instead of C8. Stroke 80 mm...
189.70€ Ex Tax: 152.98€
Control cable - Ø 7 for Mercury, Mercruiser, Mariner over 50 HP, stroke 95 mm...
44.34€ Ex Tax: 35.76€
Control cable - Ø 7 for Mercury, Mercruiser, Mariner over 50 HP, stroke 95 mm...
46.81€ Ex Tax: 37.75€
Control cable - Ø 7 for Mercury, Mercruiser, Mariner over 50 HP, stroke 95 mm...
49.27€ Ex Tax: 39.74€
Control cable - Ø 7 for Mercury, Mercruiser, Mariner over 50 HP, stroke 95 mm...
55.43€ Ex Tax: 44.70€
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
61.59€ Ex Tax: 49.67€
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
67.75€ Ex Tax: 54.64€
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
73.91€ Ex Tax: 59.60€
Control cable - Ø 8,5 suitable for inboard, and sterndrive engines through L series fitting instead of C2 when the length or when a heavy duty cable is needed. Stroke 87 mm...
43.11€ Ex Tax: 34.77€
High efficiency and flexibility cables, MachZero (like cable C2 - C8) Suitable for outboard, inboard and sterndrive engines, Stroke 87 mm...
147.81€ Ex Tax: 119.21€
Control box AISI 316 twin control, throttle + gearbox for one engine. Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables. Dims. mm. A=80 B=180 C=170 D=150 E=180 F=120..
277.89€ Ex Tax: 224.10€
Two lever single action control, throttle + shift straight hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forw..
370.92€ Ex Tax: 299.13€
Top and side mount dual action controls with lever lock device and trim switch for throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the..
325.71€ Ex Tax: 262.67€
Built in cast and chrome plated aluminum for one engine..
388.11€ Ex Tax: 313.00€
Flush side mount control B35 for throttle or gearbox. Suits: C2 C7 C8 Mach Zero C22 33C cables...
146.40€ Ex Tax: 118.07€
B400 bulkhead control box lever dual action: gas and inverter. Modern and essential design, free of protrusions, which makes themparticularly suitable for use on sailboats. Lever and flange in stainlesssteel 316 for greater resistance to the marine environment. They can bemounted on the bulkhead right or left, horizontally or vertically. Equippedwith adjustable clutch accessible to record the accelerator. By the safetyswitch X41 (optional), the starter motor is only obtained through the inverter..
411.54€ Ex Tax: 331.89€
Dual Action controls box with trim for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim...
780.40€ Ex Tax: 629.36€
Cable steering bellow Slot without fasteners...
12.32€ Ex Tax: 9.93€
Cable steering bellow Slot without fasteners...
11.09€ Ex Tax: 8.94€
Cable steering bellow Slot without fasteners...
9.85€ Ex Tax: 7.95€
Kit K25 to fit C2, Mach Zero, C7, C8, 33C cable to control B47/49. For Yamaha, Suzuki, Mariner, Chrysler...
22.36€ Ex Tax: 18.03€
Wire fairlead plastic and stainless steel complete neoprene sealing ring. Allows the passage or the output of steering cables, electrical cables and various tubes...
7.39€ Ex Tax: 5.96€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
33.21€ Ex Tax: 26.78€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
37.92€ Ex Tax: 30.58€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
42.34€ Ex Tax: 34.15€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
41.07€ Ex Tax: 33.12€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
47.62€ Ex Tax: 38.40€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
48.94€ Ex Tax: 39.47€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
51.82€ Ex Tax: 41.79€
Control cable - Ø 7 suitable for every inboard and sterndrive engines with L fittings and on outboard Chrysler, Yamaha, Suzuki, Mariner, Force, Selva, Tohatsu, Honda, Nissan by means of K series. Stroke 87 mm...
56.21€ Ex Tax: 45.33€
