-
Your shopping cart is empty!
Pilot Junior 150 N lifejacket, Self-righting capacity, keeps the childs head well out of the water. Designed for children from 18 to 40 kg. Fully automatic inflation with a 24 g CO2 cylinder.Red outer cover. Neon yellow air chamber with retroreflective tapes. Fitted with a grap loop and a crotch strap. CE EN ISO12402-3 /12401..
117.37€ Ex Tax: 94.65€
Lifejacket for cruising and intensive use. Buoyancy : Rated 150 N, actual buoyancy 165 N (33 g CO2 gas bottle). Ergonomic shape, hardwearing and flexible outer shell with reflective piping. Yellow air chamber 300 cm² retro-reflecting tapes. Backstrap and crutch strap...
156.17€ Ex Tax: 125.94€
Wall mount twin lever control for throttle or shift control for outboard engines. Uses C2 / C8 / C7 / MACHZero cables with K25 connection kit. Uses C14 cable with K23 connection kit. Uses C5 cable without connection kit...
106.50€ Ex Tax: 85.89€
Double action external wall mount single lever control for throttle and shift control for outboard and inboard engines. Uses C2 / C8 / C33 / MACHZero control cables. C5 cable can be connected with K35 kit (4620035). With the optional safety switch X12 (4620112) the engine can be started only with disengaged gearbox...
288.72€ Ex Tax: 232.84€
BA15D double contact LED bulb with parallel pins. Covered by a waterproof clear siliconic rubber compound.Reduced consumption (3W) for a performance like a 25W light. 3000 K° warm white light...
11.73€ Ex Tax: 9.46€
Bag for outboard engine, ideal for stowage and transportation. Built in polyester , impact resistant padding. Closure with nylon zipperand adjustable straps to carry by hand or shoulder...
110.86€ Ex Tax: 89.40€
Ball bearing HS blocks for sheets up to 6 mm. Stainless Steel ball bearings and cheeks, plastic sheave. Sheave diameter 19 mm. Breaking load 450 Kg...
67.21€ Ex Tax: 54.20€
Ball bearing HS blocks for sheets up to 6 mm. Stainless Steel ball bearings and cheeks, plastic sheave. Sheave diameter 19 mm. Breaking load 450 Kg...
52.05€ Ex Tax: 41.98€
Ball bearing HS blocks for sheets up to 8 mm. Stainless Steel ball bearings and cheeks, plastic sheave. Sheave diameter 28 mm. Breaking load 600 Kg...
42.04€ Ex Tax: 33.90€
Ball bearing HS blocks for Steel wires and Dyneema sheets up to 4 mm. Stainless Steel ball bearings, sheave and cheeks. Sheave diameter 19 mm. Breaking load 450 Kg...
55.08€ Ex Tax: 44.42€
Ball bearing Master blocks with 29 mm sheave. Ultra light UV resistant fiber reinforced composite material case. With swivel shackle. UV Stabilized Delrin high sliding bearing balls...
49.29€ Ex Tax: 39.75€
Ball bearing Master blocks with 57 mm sheave. Ultra light UV resistant fiber reinforced composite material case. The swivel shackle can be positioned in two directions thanks to the block lever. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
104.50€ Ex Tax: 84.27€
Ball bearing Master blocks with 40 mm sheave. Ultra light UV resistant fiber reinforced composite material case. With swivel shackle. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
82.89€ Ex Tax: 66.85€
Ball bearing Master blocks with 40 mm sheave. Ultra light UV resistant fiber reinforced composite material case. With swivel shackle. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
78.94€ Ex Tax: 63.66€
Ball bearing Master blocks with 75 mm sheave. Ultra light UV resistant fiber reinforced composite material case. The swivel shackle can be positioned in two directions thanks to the block lever. UV Stabilized Delrin high sliding bearing balls. NOTE: Working/breaking load of blocks with cam are based on the strength of the cam...
179.22€ Ex Tax: 144.53€
Ball Bearing sheave with mounted fairlead and spring. Stainless Steel reinforced...
31.36€ Ex Tax: 25.29€
Ball Bearing sheave with mounted fairlead and spring. Stainless Steel reinforced...
40.19€ Ex Tax: 32.41€
Ball Bearing sheave with mounted fairlead and spring. Stainless Steel reinforced...
49.68€ Ex Tax: 40.07€
Fixed base instainless steel and plastic, rail mount for tube Ø mm. 22-25. Dims. mm. A= 89 B=50 C=25...
11.78€ Ex Tax: 9.50€
Base For Mounting On A Flat Base For Art. 1212823..
25.66€ Ex Tax: 20.69€
Battery powered navigation lights with clamp mount and pole. Works with not included 2 x D type battery...
27.94€ Ex Tax: 22.53€
Content:N. 1 battery switch single pole140 Amp continuous duty..
41.07€ Ex Tax: 33.12€
Bimini rail mount for tubing ø 22/25 mm...
3.69€ Ex Tax: 2.98€
Ecms Black Chrome 12/24V Tach/Hourmeter complete with cables and Molex connection. 316 Stainless Steel chrome bezel. Watertight IP67 protected anti-fog curved lens. Customizable multi-color LED backlighted dial...
97.42€ Ex Tax: 78.56€
Black anodized panel with waterproof switches, fuse holders and preprinted labels...
39.49€ Ex Tax: 31.85€
Black anodized panel with waterproof switches, fuse holders and preprinted labels...
52.66€ Ex Tax: 42.47€
Black anodized panel with waterproof switches, fuse holders and preprinted labels...
74.60€ Ex Tax: 60.16€
Premium quality motor covers for outboard motors, made of the same fabric which is used for soft and sturdy Fendress fender covers. Protects from rubbing wear, from weathering, bumps, scratches, UV rays and it might even be left on the motor while cruising. Fenboard Covers are made of breathable fabric (do not create condensation) and do not fade. Machine wash and quick drying. With the Fendboard motor cover your outboard motor will remain as new for longer. Attention: fitting and sizes will n..
52.05€ Ex Tax: 41.98€
Double braidPolyester double braid with DYNEEMA SK75 coreand external cover in polyester. High tenacity, spe-cial manufacturing with opposite torsion braid. Withcolour flag. Suitable for sheet, halyard, genoa, spin-naker..
11.37€ Ex Tax: 9.17€
Black pvc double clips for ladders or boat hooks..
8.30€ Ex Tax: 6.69€
Rubber Cable steering bellow. Fast mounting. Can be changed without dismounting any mechanical part...
25.87€ Ex Tax: 20.86€
Flush-mount base Stainless Steel pole 360° lights. H 60 cm. For boats up to 12 meters...
56.01€ Ex Tax: 45.17€
Nylon round drain socket, screw type. Hole Ø16 mm., outside Ø 27 mm...
4.69€ Ex Tax: 3.78€
Pegasus BP2 bulkhead mount sailboat compass. Internal gimbal and built-in compensator magnets. Complete with clinometer and 12/24V LED lighting. Front reading 5° graduated rose with 4” (100 mm) apparent diameter...
241.81€ Ex Tax: 195.01€
Black Frame for VDO gauges, Spare part for Viewline instruments..
11.66€ Ex Tax: 9.41€
Black Frame for VDO gauges, Spare part for Viewline instruments..
11.66€ Ex Tax: 9.41€
Round Bezel for Vdo Gauges. VDO View-Line spare parts and accessories...
11.66€ Ex Tax: 9.41€
Round Plastic transom drain plugs...
4.06€ Ex Tax: 3.28€
Reinforced Nylon and Resin housing Southco locking push-button key latch. Corrosion resistant, 302 Stainless Steel internal springs. Max door thickness 12.5 mm...
42.00€ Ex Tax: 33.87€
Southco Pull-to-Open button latch: simply pull the knob to open or push the door to close. Knob stores flush and pops out with a simple touch. PC/ABS corrosion UV resistant body. Door thickness 1,5<>19 mm...
27.10€ Ex Tax: 21.85€
Uflex Ultra Black 12/24V gauges.Standard black bezel. Chromed bezel sold separately.Reinforced double layer anti-condensation lens.Red or yellow customizable backlight.Plug and play installation with multiple connector included.IP67 protection for the whole guage.Pitot speedometer must be completed with the Pitot tube. The GPS speedometer is already complete with GPS signal...
128.48€ Ex Tax: 103.62€
Wall mounting rod holder. Can be used also for rest. Size: Ø 40mm. Length 225mm...
14.90€ Ex Tax: 12.02€
Pegasus BP2 bulkhead mount sailboat compass. Internal gimbal and built-in compensator magnets. Complete with clinometer and 12/24V LED lighting. Front reading 5° graduated rose with 4” (100 mm) apparent diameter...
241.81€ Ex Tax: 195.01€
Bleeding tee coupling 3/8, Nickel-plated brass cylinder...
83.15€ Ex Tax: 67.05€
Double fixed block with becket, max work load kg.100 , break load kg.700 , overall height 43 mm...
28.15€ Ex Tax: 22.70€
Double block with spheres and bearing block , max work load kg.580 break load kg.1450..
76.82€ Ex Tax: 61.95€