-
Your shopping cart is empty!
Practical and easy to install Hyco1 steering system kit for all outboards up to 150HP total.Includes:1 UP20F Pump (Cod MTM 4655002);2 Liters Ultraflex hydraulic oil;1 UC94OBF/1 Cylinder (Cod MTM 4655010);To be completed with 2 hydraulic hoses kit.Practical and easy to install Hyco2 steering system kit only for Mercury Optimax 75/90/115/125 HP and Honda BF115D/BF130A outboards.Includes:1 UP20F Pump (Cod MTM 4655002);2 Liters Ultraflex hydraulic oil;1 UC94OBF/3 Cylinder (Cod MTM 4655009);To be com..
151.39€ Ex Tax: 122.09€
Kit no. 2 Hoses R7 5/16 flexible, high resistance, connected with swivelling nut and fittings, for hydraulic steering...
198.32€ Ex Tax: 159.93€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,218.03€ Ex Tax: 982.28€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,377.11€ Ex Tax: 1,110.57€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,377.11€ Ex Tax: 1,110.57€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,816.02€ Ex Tax: 1,464.53€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,218.03€ Ex Tax: 982.28€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,218.03€ Ex Tax: 982.28€
Bowman Hydraulic oil coolers for transmissions, lubricating and for any heat transfer fluids. Corrosion resistant Nickel alloy tubes and Bronze water end caps. Max oil pressure 20 bar Max water pressure 16 bar Max temperature 120°C..
1,377.11€ Ex Tax: 1,110.57€
Connection flange available in three different colours..
56.35€ Ex Tax: 45.45€
Mounting bracket for cylinder engines Honda 115/130..
169.99€ Ex Tax: 137.09€
Mounting bracket for cylinder engines Mercury Optimax 115..
110.86€ Ex Tax: 89.40€
Brass female curved 90° with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Brass female curved 90° with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Brass female curved 90° with fittings for copper pipe..
12.01€ Ex Tax: 9.69€
Brass female curved 90° with fittings for copper pipe..
7.39€ Ex Tax: 5.96€
Brass female curved 90° with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Brass female straight with fittings for copper pipe..
7.39€ Ex Tax: 5.96€
Brass male curved 90° with fittings for copper pipe..
9.73€ Ex Tax: 7.85€
Brass male curved 90° with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Brass male curved 90° with fittings for copper pipe..
8.62€ Ex Tax: 6.95€
Brass male curved 90° with fittings for copper pipe..
9.24€ Ex Tax: 7.45€
Brass Tee fitting with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Brass Tee fitting with fittings for copper pipe..
13.86€ Ex Tax: 11.18€
Tee 1/ 4 gas fitting, Nickel plated brass, for plastic hose Ø 6x8 mm. thread,or copper tube Ø 8 mm...
44.34€ Ex Tax: 35.76€
Portable automated equipment for filling and bleeding of hydraulic systems contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. Possible to connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of:- unit equipped with a safety valve, switch, 5 liter tank and electric motor 12V 8A.- electric cable mt. 4 full clips for connecting to the battery...
1,222.86€ Ex Tax: 986.18€
Connection flange available in three different colours..
58.20€ Ex Tax: 46.94€
Electro-hydraulic lift for outboard engines. Built in 6061 T6 aluminum alloy and stainless steel screws. Tank, Pump and plumbing pipes are containedinside Thanks to the remarkable ability to lift is suitable for all 3/4/6 cylinder engines. He has no problem to lift a V6 300HP at full throttle.Complete with position indicator and control panel. Voltage 12V. Lifting Capacity 350Kg, range mm.127. ledge mm.140....
2,556.88€ Ex Tax: 2,062.00€
Double lock valveCan be used for dual station or withautomatic pilot. To avoid that breakers bereflected on the steering wheel...
492.65€ Ex Tax: 397.30€
Double swivel 90° curved In brass complete with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Double swivel 90° curved In brass complete with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Electro-hydraulic Bennett Trim Tabs kit complete with: two standard actuators, hoses with fittings, control unit and electric cables. Tabs planes and control panel have to be ordered separately...
1,207.32€ Ex Tax: 973.65€
Electro-hydraulic Bennett Trim Tabs kit complete with: two standard actuators, hoses with fittings, control unit and electric cables. Tabs planes and control panel have to be ordered separately...
1,256.34€ Ex Tax: 1,013.18€
Brass female straight with fittings for copper pipe..
8.62€ Ex Tax: 6.95€
Brass female straight with fittings for copper pipe..
9.85€ Ex Tax: 7.95€
Brass female straight with fittings for copper pipe..
6.16€ Ex Tax: 4.97€
Brass female straight with fittings for copper pipe..
6.16€ Ex Tax: 4.97€
Brass female straight with fittings for copper pipe..
7.39€ Ex Tax: 5.96€
Fittings for a second steering station or autopilot installationit includes all necessary fittings and 8 m (26.3 ft) of 3/8 dia. nylon tube for the compensating line..
221.72€ Ex Tax: 178.81€
Hydraulic actuator cylinder length 350 mm., stroke 63 mm...
234.04€ Ex Tax: 188.74€
Hydraulic actuator cylinder length 290 mm., stroke 58 mm...
203.25€ Ex Tax: 163.91€
Bar shaped arm for UC128-OBF/2 art. 4344729..
207.49€ Ex Tax: 167.33€
Cylinder front mounting, shaped arm. HYDRAULIC INBOARD STEERINGS single engine 350HP or twin engine 700HPThe Silver Steer system supports a maximum Pressure higher than that of standard systems.The responsiveness of this pump Pressure is provided by a non-return valve (patent pending). The cylinder provides the technical featuresthat make the system ready and very resilient...
1,056.10€ Ex Tax: 851.70€
Inboard brass cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa)...
722.60€ Ex Tax: 582.74€
Inboard brass cylinders, balanced (the number of turns lock-to-lock is equal port to starboard or vice-versa)...
844.88€ Ex Tax: 681.36€
Hydraulic engine Jack Pod for all type of stern drives lifting and removing from the boat. Works in complete safety and can be used by only one operator...
1,577.81€ Ex Tax: 1,272.43€
Hydraulic oil with high viscosity index, high performance, suitable foruse in hydraulic systems heavily loaded and subjected to high tempe-rature excursions. Great thermal stability. Oxidation resistance.Perfor-mace level: DENISON HF-0 (Hybrid pump) / EATON VICKERS M-2950-S/ I-286-S /CINCINNATI MACHINE P-68 / P-69 / P-70 / DIN 51524 PART 2...
272.73€ Ex Tax: 219.95€
Rear mounting helm pump, compact structure, axial piston system, non-return valve that prevents reversibility, overpressure protection valve, 3/4 stainless steel tapered spindle, cast iron rotor for longer life, front oil filling, complete with 90 ° adjustable fittings for 3/8 pipe. Weight kg.5. White hub cap..
805.97€ Ex Tax: 649.98€