-
Your shopping cart is empty!
Protective cover for compasses Olympic 115..
12.57€ Ex Tax: 10.14€
Waterproof foot switch to operate any type of electric winch. Protective cover in impact-resistant plastic that allows the actuation without opening it. Electrical contact normally open, 12/24 V...
26.27€ Ex Tax: 21.19€
Waterproof foot switch to operate any type of electric winch. Protective cover in impact-resistant plastic that allows the actuation without opening it. Electrical contact normally open, 12/24 V...
26.27€ Ex Tax: 21.19€
Black terminal in pvc for radial...
11.09€ Ex Tax: 8.94€
Black terminal in pvc for radial and C55...
17.25€ Ex Tax: 13.91€
Steering wheel in thermoplastic antishock material, soft touch grip, 3 strokes. Universal cone..
60.97€ Ex Tax: 49.17€
Mooring line made of hand-spliced medium-strength polyester double twisted 3-strand rope...
61.83€ Ex Tax: 49.86€
The BRS SYSTEM KIT2N is designed for protection from sinking and fire of the small open boats.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT2N is 1700 litres. The weights of the displaced water (two bags) is 1700 kg. The average filling time of the one bag is 30 secs. Operation time for filling two bags and attaching the net on the boat is ~5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 lit..
995.72€ Ex Tax: 803.00€
The BRS SYSTEM KIT4 is designed for protection from sinking and fire of small boat up to 8 m long with a cabin.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT4 is 3400 litres. The weights of the displaced water (four bags) is 3400 kg. The average filling time of the one bag is 30 secs. Operation time (filling four bags) is 5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 litres.The BRS SYSTEM ..
1,091.20€ Ex Tax: 880.00€
The BRS SYSTEM KIT6 is designed for protection from sinking and fire of small boat up to 11m long with a cabin.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT6 is 5100 litres. The weights of the displaced water (6 bags) is 5100 kg. The average filling time of the one bag is 30 secs. Operation time (filling four bags) is 5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 litres.The BRS SYSTEM KIT..
1,309.44€ Ex Tax: 1,056.00€
Boiler holder for swinging conditions. Fits Wallas cookers 85 Dt / 85 DP / 85 NDt / 87 D..
155.73€ Ex Tax: 125.59€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
307.64€ Ex Tax: 248.10€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
665.35€ Ex Tax: 536.57€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
479.20€ Ex Tax: 386.45€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
534.49€ Ex Tax: 431.04€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
642.83€ Ex Tax: 518.41€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
455.50€ Ex Tax: 367.34€
Bumpers designed for application on poles and mooring posts. Due to its plasticstructure wraps the entire pole making safe the docking maneuvers. Itcan also be used as a coating of the walls of tanks hauling of reduced dimensions.Fixing performed with three clamps (25mm x 1000) includedin the package. Suitable for boats with a maximum length 20 meters or60 tons. Dim. mm. 800 x 450 x 30. Weight. 1.3 kg...
104.70€ Ex Tax: 84.44€
High strength towrope, float, equipped with nr. 2 ultra strong carabiners. Idealfor towing up to 4 persons. Length mt. 2,64...
35.47€ Ex Tax: 28.60€
Cast and polished 316 Stainless Steel 90° elbow connector...
13.55€ Ex Tax: 10.93€
Cast and polished 316 Stainless Steel 90° T connector...
16.34€ Ex Tax: 13.18€
Cast and polished 316 Stainless Steel 3-Way connector...
17.00€ Ex Tax: 13.71€
Cast and polished 316 Stainless Steel 3-Way connector...
18.05€ Ex Tax: 14.56€
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
194.01€ Ex Tax: 156.46€
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
197.70€ Ex Tax: 159.44€
Mesh bottom for water draining. Fastening with 4 suction cups (included) or with 4 eyelets. Dim. cm. 14X21..
17.13€ Ex Tax: 13.81€
Offshore compass 105 Apparent Ø mm. 91. Rose with graduation every 5 °, for motor boats from 5 to 9 meters, standard lighting at 12-24 V LED. Retractable protective cover in three sliding parts. Horizontal recessed installation or on bracket with the appropriate kit...
173.68€ Ex Tax: 140.07€
Container Made Of Polyethylene. For Life-ring ø Mm. 60 - Ø Mm. 75..
213.60€ Ex Tax: 172.26€
Kiel deck floodlightfor flexible mast-mounting. High quality, impact and shock resistant plastic. Non-corrosive, non-magnetic, seawater resistant, waterproof IP67.With 3 LED (5W) with prismatic lenses for increased brightness and brilliance. Voltage 10-30V with protection for possible reversal of polarity...
270.62€ Ex Tax: 218.25€
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
25.11€ Ex Tax: 20.25€
2.2 kW diesel heater for the environmentally conscious boater...
2,368.25€ Ex Tax: 1,909.88€
Electric blower in strong white ABS, homologated by R.I.N.A, Complying with ISO 8849. Screws and shaft in stainless steel. Flex mount and very strong dynamic flange mount. Low current draw. Countinuous duty Best ratio on the market between volume air flow and compact size. All models are ignition protected, suitable for engine room...
150.00€ Ex Tax: 120.97€
Electric blower in strong white ABS, homologated by R.I.N.A, Complying with ISO 8846. Vane axial-flow bilge blowers designed using aerospace technology to maximize performance...
167.05€ Ex Tax: 134.72€
Electric blower in strong white ABS, homologated by R.I.N.A, Complying with ISO 8849. Screws and shaft in stainless steel. Flex mount and very strong dynamic flange mount. Low current draw. Countinuous duty Best ratio on the market between volume air flow and compact size. All models are ignition protected, suitable for engine room...
153.32€ Ex Tax: 123.64€
220v Electric Inflator. Flow Rate L / Min1600, Maximum Pressure Mbar 175 (2.5 Psi),600w Power Dim. Mm. 150x160x170...
105.63€ Ex Tax: 85.19€
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
15.55€ Ex Tax: 12.54€
PVC patented fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into p..
16.34€ Ex Tax: 13.18€
Connecting pipe Kit for control unit..
61.59€ Ex Tax: 49.67€
Connecting pipe Kit for double piston..
61.59€ Ex Tax: 49.67€
Flexible water tanks for fresh water high resistance flexible water tanks are a reliable, practical and low cost solution to the storage of fresh water on board. They are flexible, lightand form-fitting, and can therefore be installed where it would not be possible to install a rigid water tank, due to the shape of the boat or difficultaccess. The double envelope principle makes maintenance easy, as the inner chamber can be easily removed from the outerenvelope for routinecleaning and examinatio..
80.63€ Ex Tax: 65.02€
Floating spare handle for Winch in reinforced plastic, with automatic locking..
27.10€ Ex Tax: 21.85€
Hamburg deck floodlightfor mounting to a mast, wall or spreader. High quality, impact and shock resistant plastic. Non-corrosive, non-magnetic, seawater resistant, waterproofIP67. With 3 LED (5W) with prismatic lenses for increased brightness and brilliance. Voltage 12-24V with protection for possible reversal of polarity...
246.02€ Ex Tax: 198.40€
Waterproof Foot Switch To Operate Any Type Of Electric Winch. With Plasticbase And Safety Cover In Stainless Steel To Prevent Accidentl Push-button Operationin Stainless Steel. Electrical Contact Normally Open, 12/24 V...
63.75€ Ex Tax: 51.41€
Waterproof Foot Switch To Operate Any Type Of Electric Winch. With Plasticbase And Safety Cover In Stainless Steel To Prevent Accidentl Push-button Operationin Stainless Steel. Electrical Contact Normally Open, 12/24 V...
63.75€ Ex Tax: 51.41€
Electric cooler built from strong and thick polypropylene this cooler stay cool for hours even when unplugged. When plugged into electricity keep content 20°C below the ambient temperature. The improved and very quiet fan emits a maximum of 39 dB. The power cord and plug can also be easily removed and conveniently stored inside the cooler during non-use. The cooler has antimicrobial lining that comes from a chemical additive injected into the plastic within the liner. Capacity: 28L. Weight: 3.7k..
212.34€ Ex Tax: 171.24€