-
Your shopping cart is empty!
Fin for 75/130 HP engine (Or. Ref. 41107 ZW1 BO1ZA )..
22.40€ Ex Tax: 18.07€
Anodized Aluminum folding boarding ladders for inflatables. Two fastening spliced ropes included...
59.62€ Ex Tax: 48.08€
Anodized Aluminum folding boarding ladders for inflatables. Two fastening spliced ropes included...
74.52€ Ex Tax: 60.10€
Anodized Aluminum square frame Goiot type hatch with 10 mm Methacrylate glass...
327.66€ Ex Tax: 264.24€
Aluminum oxide abrasive fibred discs. Perfect for finishing, deflashing and antirust treatments of metals...
32.29€ Ex Tax: 26.04€
Martyr Aluminum M2 alloy anodes for Mercury outboard engines. • Protect 50% longer than traditional zinc anode • Weigh 50% less than traditional zinc anodes ..
17.39€ Ex Tax: 14.03€
Fendering profile with Anodized Aluminum rub rail. The Aluminum rub rail has 4 meter length and has to be chosen upon the desired height (H mm).The Black or White PVC insert is available in 12, 16 and 24 meters pack...
8.61€ Ex Tax: 6.94€
Suspended anodecomplete with mt. 6 PVC coated stainless steelcable and terminal for electrical connection...
113.06€ Ex Tax: 91.18€
Omnidirectional Glomex V9150AGC Adhara TV antenna for analog/digital TV signals. Ideal for any type of boat. Thanks to the 55 mm height shark fin it is able to receive vertical and horizontal polarized TV signals. Endowed with stylus for receiving the DAB signal and automatic gain control amplifier (AGC) that ensures a perfect signal either at sea and at berth. The reinforced base with the micro-fused Stainless Steel mount ensures the best antenna's stability in all sea conditions. With t..
35.11€ Ex Tax: 28.31€
A/B Class amplifier carefully designed for marine environment with sealed outputs. With particular linear circuit that reduces distorsion and raises audio quality. With gain control, it can work either with high level or low level input. Speaker short circuit and overheating protection...
210.64€ Ex Tax: 169.87€
Anchor chain Tensioner in Aisi 316 stainless steel to lock down the chain. Size A Max=81, A Min=51, B=111, C=46, D=42 mm...
66.75€ Ex Tax: 53.83€
Ultralight hardened high-tech Aluminum-Magnesium alloy Fortress anchor. Perfect for motorboats, inflatables and used as a secondary anchor on large vessels. Adjustable fluke angles: 32° for sand - 45° for soft mud. Hardened high-tech Aluminum-Magnesium alloy Fortress anchor weighs less than a third as much as a steel anchor, with a 100% better holding power due to its design. Disassembles for easy storage. Perfect when used as a picnic anchor. Adjustable fluke angles for better holding po..
411.32€ Ex Tax: 331.71€
Ultralight hardened high-tech Aluminum-Magnesium alloy Fortress anchor. Perfect for motorboats, inflatables and used as a secondary anchor on large vessels. Adjustable fluke angles: 32° for sand - 45° for soft mud. Hardened high-tech Aluminum-Magnesium alloy Fortress anchor weighs less than a third as much as a steel anchor, with a 100% better holding power due to its design. Disassembles for easy storage. Perfect when used as a picnic anchor. Adjustable fluke angles for better holding po..
555.84€ Ex Tax: 448.26€
Galvanized Steel quick grasp Vulcan anchor for any type of seabed, for small to big powerboats and for yachts. With high resistance fluke geometry shank and snug fit on any type of bow thanks to the omission of the roll-bar. The innovative Roll-Palm ensures anchor landing on the ideal angle of penetration, while the V-bulb extends fluke ballast downward to gain maximum leverage and efficiency, granting more holding power...
2,598.02€ Ex Tax: 2,095.17€
Rope and chain on a single gypsy On Deck anchor windlass. Reinforced Composite material case, Bronze and Stainless Steel traction parts. Endowed with chaincounter sensor, Manual Free-Fall chain system and pressure lever. IP66 watertight motor. Complete with control box and handle...
1,433.51€ Ex Tax: 1,156.06€
Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...
121.76€ Ex Tax: 98.20€
Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...
117.94€ Ex Tax: 95.11€
Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...
187.79€ Ex Tax: 151.44€
Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...
58.38€ Ex Tax: 47.08€
Ancor cooling pumps maintenance service kit. Contains: Impeller, seals, bearings, cover with screws, cam, lubricant and user manual...
59.96€ Ex Tax: 48.35€
Size Ø int.mm. 12.1 Ø 56 29.4 mm thick est.mm., nr. 12 blades..
24.09€ Ex Tax: 19.43€
Cooling pump for Isotta Fraschini / Deutz / Crm / Seatek / Volvo Tmd engines...
1,266.21€ Ex Tax: 1,021.14€
Aluminum bar for engines Volvo Penta IPS1 drive, IPS2, IPS3, IPS15 (or.ref. 40005875)..
92.64€ Ex Tax: 74.71€
Aluminium anodes kit for engine Volvo (3 BLADES) d2-55a,b,c,d,e,f..
17.65€ Ex Tax: 14.23€
Martyr Aluminum M2 alloy anodes for Mercruiser stern drive engines. • Protect 50% longer than traditional zinc anode • Weigh 50% less than traditional zinc anodes ..
7.03€ Ex Tax: 5.67€
Aifo-Fiat engine (13x26+7mm) pencil anodes...
36.37€ Ex Tax: 29.33€
Bow thrust VETUS series KGF75/95 anode (Or. Ref. OEM BP1185)..
39.12€ Ex Tax: 31.55€
Anode for SEAL DRIVE 100 cooler (Or. Ref. 852019)..
28.10€ Ex Tax: 22.66€
Tohatsu M25C2/25D/40D/50D(2ST) engine skeg anode. Zn = Zinc..
29.86€ Ex Tax: 24.08€
Bow thrust Lewmar series 140S ogive..
25.91€ Ex Tax: 20.90€
Bow thrust Lewmar series 185M ogive..
28.45€ Ex Tax: 22.95€
Bow thrust Lewmar series 250-300L ogive..
37.60€ Ex Tax: 30.32€
Ogive anode with conic hexagonal insert for propeller shafts...
9.46€ Ex Tax: 7.63€
Ogive anode with conic hexagonal insert for propeller shafts...
13.54€ Ex Tax: 10.92€
Ogive anode with conic hexagonal insert for propeller shafts...
27.07€ Ex Tax: 21.83€
Ogive anode with conic hexagonal insert for propeller shafts...
39.05€ Ex Tax: 31.50€
Ogive anode with conic hexagonal insert for propeller shafts...
40.61€ Ex Tax: 32.75€
Plate for SX/DP-S legs (Or. Ref. 3855411)..
54.38€ Ex Tax: 43.85€
Anode with cap Or. Ref. N51-11325-01..
77.30€ Ex Tax: 62.34€