Search - slam ocean evo navy 45 boots for yachts

Search Criteria

Products meeting the search criteria

Show:
Sort By:

Bamboo wood VHS/GPS holder 90 x 45 x H140 mm

Bamboo wood VHS/GPS holder. Bamboo is light, elegant, ecologic and stronger than Teak...

26.09€ Ex Tax: 21.04€

bar anode for arneson drives zn ref 150x88 mm

Bar anode for Arneson drives. Zn = ZincAl = Aluminum..

34.79€ Ex Tax: 28.06€

Bar Anode for Volvo Penta DUO PROP DPH-DPR

Bar for DUO PROP DPH-DPR (Or. Ref. 3588745-3588770-3588768)..

30.64€ Ex Tax: 24.71€

bar for 60/300 hp engine

Anode for engine 60-175 HP (or. ref. 433580)..

28.87€ Ex Tax: 23.28€

bar for yamaha engine top 700 40/100 hp

Plate for Yamaha Top 700 60/90 HP engine (or. ref. 6H1-45251-02)..

19.54€ Ex Tax: 15.76€

Barbed transom drains for expanding drain plugs BLACK - CE 33 x 100 mm

Barbed transom drains for expanding drain plugs: 1425010/11/12/90/91-1425114/15/16...

8.13€ Ex Tax: 6.56€

Barbed transom drains for expanding drain plugs D22.7 grey

Barbed transom drains for expanding drain plugs: 1425010/11/12/90/91-1425114/15/16...

8.13€ Ex Tax: 6.56€

Base for antennas, model for mounting rails 22 - 25mm

Fixed base instainless steel and plastic, rail mount for tube Ø mm. 22-25. Dims. mm. A= 89 B=50 C=25...

11.78€ Ex Tax: 9.50€

base for fuse 63-80-125-160amp

Fuse holder basemade in self extinguishing thermoplastic material, where are contacts.Suitable for mounting on plate or DIN slide. Equipped with transparentcover to protect against casual touches. For fuse art. 3910563 and similar..

26.13€ Ex Tax: 21.07€

base for mounting on a flat base for art. 1212823

Base For Mounting On A Flat Base For Art. 1212823..

25.66€ Ex Tax: 20.69€

base for tube ø mm.40

Brass base for tube Ø mm. 40...

13.82€ Ex Tax: 11.15€

Base mounting for sailboats tree

Base Mounting For Sailboats Tree..

15.38€ Ex Tax: 12.41€

Base Navegacion Luces NaviSafe for inflatable boats

BaseAdjustable rounded support for rigid inflatableboats rounded Ø mm. 25. Size length. mm. 97..

28.61€ Ex Tax: 23.07€

Batteries load controller for wind generator

Charge regulator for 12 V batteries Suitable for installations with multiple power sources, suchgeBlacktore mains electricity, engine driven alternator over the Aerogenor Aquagen. Recommended for single or dual battery banks. Nowithdrawal from the standby battery..

440.46€ Ex Tax: 355.21€

battery box mm.457x720x330h

Plastic case for batteries for large capacity batteries...

132.59€ Ex Tax: 106.93€

Battery charger Quick SBC/NRG 1450 24v 60a

NRG Battery Charger SBC switching technology, digital communication interface CAN BUS systemof digital distribution of charge that can put up to 3 parallel SBC NRG (700-1100 and high power).Charge selector for liquid electrolyte batteries open and sealed, GEL or AGM. Multiple outputs inorder to charge more groups of batteries (internal MOSFET charge separator). Possibility to usethe charger as a power supply without batteries. Variable speed fan cooling. Overload protection,output short circuit,..

1,328.47€ Ex Tax: 1,071.34€

Battery charger Quick SBC/NRG 2450 24v 100a

NRG Battery Charger SBC switching technology, digital communication interface CAN BUS systemof digital distribution of charge that can put up to 3 parallel SBC NRG (700-1100 and high power).Charge selector for liquid electrolyte batteries open and sealed, GEL or AGM. Multiple outputs inorder to charge more groups of batteries (internal MOSFET charge separator). Possibility to usethe charger as a power supply without batteries. Variable speed fan cooling. Overload protection,output short circuit,..

1,847.63€ Ex Tax: 1,490.02€

belgium high quality polyester fabric flags 30 x 45 cm

High quality Polyester fabric flags...

9.42€ Ex Tax: 7.60€

bellows for Mercruiser Alpha Generation II 816431A1

Bellows ALPHA GENERATION IIOriginal reference: 816431A1..

55.43€ Ex Tax: 44.70€

Belt cutter accessory blade for portable rope cutter device

Belt cutter accessory blade for portable rope cutter device, for the product 1-B-3190003...

34.92€ Ex Tax: 28.16€

BERMUDA TECH SLAM STEEL 3XL

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL M

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL S

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL XL

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL XS

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL XXL

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

Bi-component glue for sticking on surface Breons 1kg

Bi-component gluefor sticking on surface (yield about 1 sqm.)..

45.09€ Ex Tax: 36.36€

Bi-thermostat for Sigmar and Quick Boilers

BI-Thermostatmonophase heating element for Quick and Sigmar water heater 220/110 V..

42.98€ Ex Tax: 34.66€

Bib Pant Ocean XM Yachting yellow t-s

The Ocean suit is engineered to provide optimum protection, superior comfort and absolute safety in the most extreme conditions (night and open ocean sailing). Manufactured from hard-wearing 4-layer fabric: polyamide dyed with durable water repellent finish, coated with a microporous layer, laminated with a hydrophilic membrane and bonded with tricot. Highly breathable and fully waterproof. Ultimate lightweight and speed of drying. Zip closure behind a large front gusset, protected by a storm fl..

367.08€ Ex Tax: 296.04€

Bidet Kit for hot and cold water

Chromed Brass cool/warm or only cool water bidet kit for toilets. Fits any toilet seat...

186.27€ Ex Tax: 150.22€

big battery box 455x205x240h mm

Battery boxin plastic for high capacity batteries.Inner dims. 490x240x240h mm...

44.34€ Ex Tax: 35.76€

Bilge blower Attwood for engine rooms 24V D100

Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...

38.19€ Ex Tax: 30.79€

Bilge blower Attwood for engine rooms 12V D100

Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...

36.95€ Ex Tax: 29.80€

Bilge blower Attwood for engine rooms 12V D75

Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...

31.10€ Ex Tax: 25.08€

Bilge blower Attwood for engine rooms TURBO3000 12V

Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...

36.95€ Ex Tax: 29.80€

Bilge blower Attwood for engine rooms TURBO4000 12V

Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...

40.65€ Ex Tax: 32.78€

Bilge blower Attwood for engine rooms TURBO4000 24V

Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...

78.94€ Ex Tax: 63.66€

Bimini white rail mount for tubing ø 22/25 mm

Bimini rail mount for tubing ø 22/25 mm...

3.69€ Ex Tax: 2.98€

biminis plastic fork bracket

Biminis Plastic fork bracket...

3.51€ Ex Tax: 2.83€

Black Bimini Support For Inflatable Boats

Base in EPDM, bayonet coupling for inflatable boats for art. 5252220/30..

8.55€ Ex Tax: 6.89€

Black clips 34/45mm

20 pieces compact Black clips per pack...

0.88€ Ex Tax: 0.71€

black compass for horizontal and vertical surface offshore 75

Conical card graduated every 5° apparent Ø 70 mm. Heading numerals every 30°. For motor boat from 5 to 8 mt.. Included 1 bulb 12 Vdc .Installation: Bracket mount on horizontal or vertical surface..

110.86€ Ex Tax: 89.40€

Black Control panel joystick for electric retractable thrusters Max Power

Control panel joystickfor electric retractable thrustersSize 120x65 mm...

463.40€ Ex Tax: 373.71€

Black cover for outboard motors size M 40x20x25 cm

Premium quality motor covers for outboard motors, made of the same fabric which is used for soft and sturdy Fendress fender covers. Protects from rubbing wear, from weathering, bumps, scratches, UV rays and it might even be left on the motor while cruising. Fenboard Covers are made of breathable fabric (do not create condensation) and do not fade. Machine wash and quick drying. With the Fendboard motor cover your outboard motor will remain as new for longer. Attention: fitting and sizes will n..

52.05€ Ex Tax: 41.98€

Black Cover Joint for Rubber Fender Profile H37

Fendering profile with Anodized Aluminum rub rail. The Aluminum rub rail has 4 meter length and has to be chosen upon the desired height (H mm).The Black or White PVC insert is available in 12, 16 and 24 meters pack...

7.02€ Ex Tax: 5.66€

Black Cover Joint for Rubber Fender Profile H56

Fendering profile with Anodized Aluminum rub rail. The Aluminum rub rail has 4 meter length and has to be chosen upon the desired height (H mm).The Black or White PVC insert is available in 12, 16 and 24 meters pack...

9.36€ Ex Tax: 7.55€

Black covers for Buoys POLYFORM A1

Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..

30.05€ Ex Tax: 24.23€

Black covers for Fenders POLYFORM F1

Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..

11.33€ Ex Tax: 9.14€

Black covers for Fenders POLYFORM F2

Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..

13.97€ Ex Tax: 11.27€

Black covers for Fenders POLYFORM F3

Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..

16.74€ Ex Tax: 13.50€