-
Your shopping cart is empty!
Your shopping cart is empty!
Blade Fender filled in soft polyurethane, ensures maximum shock absorption. Idealfor protecting the bow of the cruiser and racer sailboats. Thanks to itsshape can also be left during the navigation. It adapts to any type of bowup to 7 cm. wide. Supplied with 2 flat braids already mounted. Whitecolour. Dim. cm. 104x16x12. Weight 2,7 kg...
160.67€ Ex Tax: 129.57€
Pvc Profile made with material with a very low coefficent of friction. Not dirty thegelcoat, excellent resistance to impact and abrasion. Dim. mm. 72x37 h. Color grey, Bars da mt. 2...
26.26€ Ex Tax: 21.18€
Fender filled in soft polyurethane for protecting the stern of sailboats, ensuresmaximum shock absorption. It adapts to any kind of stern. It adapts to every type of stern from 75° a 90°. Dim. mm. 660x280x240...
158.42€ Ex Tax: 127.76€
A traditional fender will tilt away from the hull and may eventually slip above or below, whereas the articulated RIB fender follows the curves of the hull and remains in the right position to protect the boatefficiently. Comes with 1 m Ø 5 mm rope...
23.30€ Ex Tax: 18.79€
Set For Nautic Chart Collected In A Handy Plastic Box Comprises: Parallel Rulers, Sailing Team, Goniometer, Tracer Log, Compass Pencil And Eraser..
128.51€ Ex Tax: 103.63€
High quality Polyester fabric flags...
11.86€ Ex Tax: 9.56€
Sewage and waste tanks complete with discharging system with macerator pump, Y valve, anti-odor filter and gauge panel with probe...
838.06€ Ex Tax: 675.85€
Gray and waste water plastic tankcomplete of outboard emptying sistem with self-priming pump for emptying JABSCO 12V, capacity 19 lt/min, inlet/outlet hose Ø mm. 38...
740.20€ Ex Tax: 596.93€
Gray and waste water plastic tankcomplete of outboard emptying sistem with self-priming pump for emptying JABSCO 12V, capacity 19 lt/min, inlet/outlet hose Ø mm. 38...
757.72€ Ex Tax: 611.07€
Descaler, desalinizer and deoxidizer detergent. Specific for hull rust stains removal, Stainless Steel and Chromed surfaces polishing. Excellent descaler for engines cooling circuit...
20.25€ Ex Tax: 16.33€
High strength resin Ball Bearing Mini Snatch Block D=32 mm. It can be fastened both with a line or with a shackle. The Snap Ring is a line loop with an easy locking system to avoid accidental opening...
38.87€ Ex Tax: 31.35€
The cheekplate revolves around the sheave axle allowing the block to open; a safety ball prevent the block from opening and an adjustable screw allows to set the ball on locked position. There is a becket for the “hanging line”. Material: sheave with composite fibre main bearing and double side ball bearing. Hard anodized and teflon coated aluminium cheekplates with side rubber protections (yellow rubber on the revolving cheekplate)...
220.73€ Ex Tax: 178.01€
Specific detergent for descaling surfaces in contact with salt water, specially from keels and stern drives...
13.42€ Ex Tax: 10.82€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Navigation lights R.I.Na. approval. Black reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval. Supplied without bulb. Fresnel lens-resistant polycarbonate...
78.04€ Ex Tax: 62.94€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Navigation lights R.I.Na. and MED 96/98 approval - EC for commercial boat. Black Polycarbonate, stainless steel wall bracket, complete with certificate. Supplied without lamp...
151.51€ Ex Tax: 122.19€
Flood or spot beam bulbs for spotlights and searchlights...
35.98€ Ex Tax: 29.02€
Very silent diaphragm pump with 360 ° rotating head for multiple installation possibilities. It can work dry without being damaged. Flow rate Lt./min. 16. Complies with ISO 8849..
317.06€ Ex Tax: 255.70€
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
390.51€ Ex Tax: 314.93€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Corrosion, electrolysis and fuel resistant bilge pumps.Of rugged construction, they produce high capacityoutput with the convenience of many mounting positions(see drawings). Hose diameter Ø mm. 38. Maximum lift mt. 3. Spare diaphragm art. p16217..
124.01€ Ex Tax: 100.01€
Diaphragm water pressure system. The BG117 pump has the samecharacteristics of the BG108 but has a pressure switch to be used in apressurized system. Capacity 18 Lt./min...
478.82€ Ex Tax: 386.15€
Diesel and gasoline engine ignition switch with rubber cap. Brass body, diameter 45 mm. 4 Terminals - 4 Positions...
32.62€ Ex Tax: 26.30€
Rubber hose for diesel fuel and unleaded gasoline on pleasure boats up to 24meters. Regulations SAEJ 1527:2004 ISO 7840:2004 A1-USCGA1R1-EC. Approved CE 0474 - R.I.Na. LLOYDs REGISTER. Operating temperature - 30 ° C + 100 ° C. Operating pressure of 10 bar...
100.78€ Ex Tax: 81.28€
Product mentioned in the case of bacterial contamination of reservoirsand tanks of diesel. Suitable for the treatment of diesel, biodiesel, andmixtures thereof. Ensures effective biocidal action at points of higherconcentration of bacteria, avoiding clogging and / or rupture of filters,injectors, etc.. Pour the product into the tank before filling. Use 1 liter ofoil every 1000-2000lt...
71.58€ Ex Tax: 57.72€
Diesel filter dim.Ø ext.mm.96 Seal Ø mm. 72 height mm.120 step M 20 X 1.5, equipped with drain..
33.26€ Ex Tax: 26.82€
Cartridge diesel oil in paper dim. est ext.mm.50 Ø hole 21 height mm.92..
23.40€ Ex Tax: 18.87€
Racor diesel filters with AQUABLOC technology. High capacity evaluated (99% effectiveness in separating water from diesel). Comes with 30 micron cartridge. Can replace Griffin Spin-on filters...
236.60€ Ex Tax: 190.81€
Different thickness angled Plastic transom pads. To balance perfectly the engine...
11.26€ Ex Tax: 9.08€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
1.93€ Ex Tax: 1.56€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.13€ Ex Tax: 1.71€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.51€ Ex Tax: 2.03€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.71€ Ex Tax: 2.18€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.90€ Ex Tax: 2.34€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
3.09€ Ex Tax: 2.49€
