-
Your shopping cart is empty!
Your shopping cart is empty!
Composite drive legwith screws, plugs and gasket...
779.29€ Ex Tax: 628.46€
Composite drive legwith screws, plugs and gasket...
867.12€ Ex Tax: 699.29€
General Motors engine (16x54mm) pencil anodes...
40.85€ Ex Tax: 32.94€
General Motors engine (19x85mm) pencil anodes...
14.23€ Ex Tax: 11.48€
General Motors engine (19x85mm) pencil anodes...
40.19€ Ex Tax: 32.41€
Rope and chain on a single gypsy On Deck anchor windlass. Anodized Aluminum case, Bronze and Stainless Steel traction parts. Endowed with chaincounter sensor, manual free fall chain system and pressure lever. IP66 watertight motor. Complete with control box and handle. "Free Fall" automatic chain system available only on FF types...
1,555.47€ Ex Tax: 1,254.41€
Rope and chain on a single gypsy On Deck anchor windlass. Anodized Aluminum base and case, Bronze and Stainless Steel traction parts. Endowed with chaincounter sensor, manual free fall chain system and pressure lever. IP66 watertight motor. Complete with control box and handle. "Free Fall" automatic chain system available only on FF types...
2,070.11€ Ex Tax: 1,669.44€
Rope and chain on a single gypsy On Deck anchor windlass. Anodized Aluminum base and case, Bronze and Stainless Steel traction parts. Endowed with chaincounter sensor, manual free fall chain system and pressure lever. IP66 watertight motor. Complete with control box and handle. "Free Fall" automatic chain system available only on FF types...
1,865.41€ Ex Tax: 1,504.36€
Spare gypsies for Quick windlasses...
227.62€ Ex Tax: 183.56€
Bamar manual furler for free-flying asymmetric sails such as Asymmetric Spinnaker, Gennaker, Mps and Reacher. Made of Ergal, 17-4PH Steel and Carbon fiber that allows 60% decrease of working load weight. Composed by drum, swivel halyard top and special RollGen anti-torsion stay kit. The drum rotates with endless line and can be used to furl sails with luff integral to the stay, such as Code 0, Drifter, etc. The EVO S drum is a structural stay furler and can contain inside all the line, leaving ..
309.68€ Ex Tax: 249.74€
Bestseller
Black burnished Aluminum car with 316 Stainless Steel stop pin and Nylon sliding inserts. Swiveling (±50°) 316 Stainless Steel sheave base. Resin sheave with 2 side (self-captive) ball bearings, wide section for two sheets. Working load (SWL) 800 Kg...
217.44€ Ex Tax: 175.35€
Bestseller
Black burnished Aluminum car on low-friction Nylon sliding inserts. Swiveling (±50°) 316 Stainless Steel sheave base. Resin sheave with 2 side (self-captive) ball bearings, wide section for two sheets. 316 Stainless Steel pin with lock-up position. Frontal becket. Working load (SWL) 2800 Kg...
317.47€ Ex Tax: 256.03€
Bestseller
Black burnished Aluminum car on low-friction Nylon sliding inserts. Swiveling (±50°) 316 Stainless Steel sheave base. Aluminum sheave with 2 side ball bearings. 316 Stainless Steel pin with lock-up position. Becket for remote control line. Weight 1.50 Kg. SWL 3800 Kg...
447.05€ Ex Tax: 360.53€
Bestseller
Genoa Car HS20 for boats up to 7.20 m (24’)....
81.64€ Ex Tax: 65.84€
Bestseller
Genoa HS25 car and tracks for boats up to 10.20 m (34’)...
129.58€ Ex Tax: 104.50€
Bestseller
Genoa HS32 car for boats up to 13 m (43’)...
238.52€ Ex Tax: 192.35€
Bestseller
Black burnished Aluminum car with 316 Stainless Steel stop pin and Nylon sliding inserts. Swiveling (±50°) 316 Stainless Steel sheave base. Resin sheave with 2 side (self-captive) ball bearings, wide section for two sheets. Weight 0.40 Kg. SWL 800 Kg. T Track with 50 mm spaced holes. High resistance Silver anodized Aluminum foil. Weight 0.5 Kg/m. Mounting with 5 mm screws...
77.75€ Ex Tax: 62.70€
Bestseller
Black burnished Aluminum car with 316 Stainless Steel stop pin and Nylon sliding inserts. Swiveling (±50°) 316 Stainless Steel sheave base. Resin sheave with 2 side (self-captive) ball bearings, wide section for two sheets. Weight 0.40 Kg. SWL 800 Kg. T Track with 50 mm spaced holes. High resistance Silver anodized Aluminum foil. Weight 0.5 Kg/m. Mounting with 5 mm screws...
98.48€ Ex Tax: 79.42€
Galvanized steel long link chain DIN 5685...
409.57€ Ex Tax: 330.30€
Galvanized steel long link chain DIN 5685...
667.01€ Ex Tax: 537.91€
Galvanized steel long link chain DIN 5685...
86.23€ Ex Tax: 69.54€
Galvanized steel long link chain DIN 5685...
117.02€ Ex Tax: 94.37€
Galvanized steel long link chain DIN 5685...
160.13€ Ex Tax: 129.14€
Galvanized steel long link chain DIN 5685...
944.94€ Ex Tax: 762.04€
Galvanized steel long link chain DIN 5685...
1,222.86€ Ex Tax: 986.18€
Galvanized steel long link chain DIN 5685...
1,445.19€ Ex Tax: 1,165.48€
Galvanized steel long link chain DIN 5685...
1,778.70€ Ex Tax: 1,434.44€
Galvanized steel long link chain DIN 5685...
2,779.22€ Ex Tax: 2,241.31€
Galvanized steel long link chain DIN 5685...
307.95€ Ex Tax: 248.34€
Genuine german Loxx-Tenax button keys. Attention: genuine Tenax (Made in Germany) becomes Loxx...
31.31€ Ex Tax: 25.25€
Genuine german superior quality Loxx-Tenax base plate made of Nickeled/Chromed Brass. Attention: genuine Tenax (Made in Germany) becomes Loxx...
2.11€ Ex Tax: 1.70€
Genuine german superior quality Loxx-Tenax fabric base connector made of Nickeled/Chromed Brass. Attention: genuine Tenax (Made in Germany) becomes Loxx...
2.81€ Ex Tax: 2.27€
Genuine Mercruiser 864309T02 exhaust riser. Fits 6.2L MPI (serial number 0M600000 thru OW309999) engines. To be completed with gasket and 4 screws...
633.90€ Ex Tax: 511.21€
Genuine Mercruiser 864591T02 exhaust riser. Fits 4.3MPI - 5.0MPI - 350MAG MPI - ALPHA - BRAVO - 6.2L MPI (serial number 0W310000 thru 1A299999) - 377MAG MPI engines. To be completed with gasket and 4 screws...
580.88€ Ex Tax: 468.45€
Genuine Mercruiser 860246A15 exhaust manifold complete with gasket. Fits 5.0L/LX - 5.7L/LX engines. To be completed with 4 screws...
328.79€ Ex Tax: 265.15€
Genuine Mercruiser 860246A15 exhaust manifold complete with gasket. Fits 5.0L/LX - 5.7L/LX engines. To be completed with 4 screws...
467.58€ Ex Tax: 377.08€
Almost as genuine quality Hi-Line fuel line connectors for Yamaha engines. With safety springlock type connector and front fuel exit connection for a more regular flow...
12.03€ Ex Tax: 9.70€
Mercruiser genuine stern drive gasket set...
14.04€ Ex Tax: 11.32€
100N comfortable and wearable life jacket EN ISO 12402-4 certified for pleasure navigation within 6 miles from coast. Features: tear resistant fabric, zipper, belt with quick release buckle, bottom and crotch fastening strap, reflective patches and whistle. 100N - For use in coastal water, suitable even for non-swimmers but with light clothes. Not suitable for unconscious persons...
46.36€ Ex Tax: 37.39€
The amplifier is a device allowing you to monitor the antenna gain, expressed in dB, by adjusting intensity of the signal input or output. Generally the amplifier allows the adjustment of the signal power in order to optimize the reception: it amplifies the weaker signals or dramps the stronger ones.The amplifier is provided with A/B switch function which, if an alternative TV connection is available (for instance from dock), allows cut off the TV-signal reception of your antenna and to receive ..
128.73€ Ex Tax: 103.82€
This compact Glomex Altair TV antenna provides optimum omni-directional performance with both horizontal and vertical polarised signals, thanks to the extended height of the radome enclosure which allows for the inclusion of a vertical element inside. Equipped with a shielded amplifier with low noise factor and automatic gain control (AGC) which ensures a perfect signal both offshore and in the marina. If matched with a V9147 (2-way, optional) splitter, installed between the antenna and the ampl..
389.09€ Ex Tax: 313.78€
UV Resistant flexible Fiberglass FM RA300FM antenna for any type of boat. The FME connector allows quick and easy installation thanks to the plugged cables and adaptors. 5/8" x 24 Threaded base. 100W / FM 88/108 MHz / 93 Ohm. Height: 1.2 m. With the extension or the adapter the antenna can be mounted on 1" x 14 threaded bases. The connector allows to connect the FME thread to the PL258 coaxial connection...
65.73€ Ex Tax: 53.01€
Polaris is a directional TV antenna. It is about 3 times more efficient if compared to an omnidirectional antenna and allows to reach up to 36 dB. The reception angle is easily orientated towards the signal direction means an infrared remote control which actuates the inside electric drives. The Polaris antenna is equipped with two amplifiers, an inner one and an outer one with by-pass, which assure high noise squelching and by-pass capacity. Polaris can receive polarized TV signals both horizon..
533.61€ Ex Tax: 430.33€
UV Resistant flexible Fiberglass or Stainless Steel VHF RA106 FME antenna for any type of boat. The FME connector allows quick and easy installation thanks to the plugged cables and adaptors. 5/8" x 24 Threaded base. 100W / 3db / 156/162 MHz / 50 Ohm. Height: 0.9 m. With the adapter the antenna can be mounted on 1" x 14 threaded bases. The connector allows to connect the FME thread to the PL258 coaxial connection...
56.95€ Ex Tax: 45.93€
With this splitter you can use just one VHF antenna to receive AM / FM radio and AIS signals simultaneously, besides being able to use the VHF transceiver. Consumption: 25 mA Inputs: 1 VHF antenna, outputs: 3 for AM / FM, AIS and VHF RTX..
92.38€ Ex Tax: 74.50€
Gyro-stabilized satellite Glomex Rhea antenna for full-HD DVB-S2 TV signals. Exceptional performance thanks to the 470 mm (18”) HPD parabolic dish and low energy consumption (12V -1,5A). With new signal research software and innovative STO (Silent Tracking Operation) noise reduction system. Endowed with new electronics that allow the compensation of quality losses due to the increasing of the satellites on the terrestrial orbit whilst transmitting on frequency. The (-9°/+81°) elevation range i..
2,904.29€ Ex Tax: 2,342.17€
Glomex Splitter Two-way TV antenna. It allows you to send a terrestrial TV signal to two televisions or television receivers.1 input, 2 outputs...
20.85€ Ex Tax: 16.81€
Fiberglass VHF RA104 compact antenna for prestige motorboats. 100W / 3db / 156/162 MHz / 50 Ohm. Height: 1 m. Complete with 4.5 m coaxial cable, connector and Nylon or Stainless Steel base...
138.50€ Ex Tax: 111.69€
Fiberglass VHF RA104 compact antenna for prestige motorboats. 100W / 3db / 156/162 MHz / 50 Ohm. Height: 1 m. Complete with 4.5 m coaxial cable, connector and Nylon or Stainless Steel base...
92.15€ Ex Tax: 74.32€
Genuine german superior quality Loxx-Tenax spring lifting caps. Antique Brass or Gold plated body, Stainless Steel spring. Suitable for old type boats and for elegant interiors. Attention: genuine Tenax (Made in Germany) becomes Loxx...
9.09€ Ex Tax: 7.33€
