-
Your shopping cart is empty!
Your shopping cart is empty!
Galvanized Steel anchor for soft seabeds such as sand, mud and slime. Thanks to the weight distribution at the tip the anchor immediately finds the optimal penetration angle and guarantees a stable hold...
98.30€ Ex Tax: 79.27€
Galvanized Steel anchor for soft seabeds such as sand, mud and slime. Thanks to the weight distribution at the tip the anchor immediately finds the optimal penetration angle and guarantees a stable hold...
918.81€ Ex Tax: 740.98€
Galvanized Steel thimbles that prevent wear on ropes and wires...
0.80€ Ex Tax: 0.64€
Galvanized Steel thimbles that prevent wear on ropes and wires...
3.83€ Ex Tax: 3.09€
Galvanized Steel thimbles that prevent wear on ropes and wires...
5.11€ Ex Tax: 4.12€
Galvanized Steel thimbles that prevent wear on ropes and wires...
7.99€ Ex Tax: 6.44€
Galvanized Steel thimbles that prevent wear on ropes and wires...
8.39€ Ex Tax: 6.76€
Galvanized Steel thimbles that prevent wear on ropes and wires...
10.66€ Ex Tax: 8.60€
Wire rope clip in Galvanized steel. Size: Wire Ø 14mm. M10 A 43mm. H 21mm...
1.25€ Ex Tax: 1.01€
Wire rope clip in Galvanized steel. Size: Wire Ø 19mm. M12 A 53mm. H 31mm...
2.31€ Ex Tax: 1.86€
Wire rope clip in Galvanized steel. Size: Wire Ø 26mm. M14 A 65mm. H 38mm...
3.96€ Ex Tax: 3.19€
Wire rope clip in Galvanized steel. Size: Wire Ø 2-3 mm. M4 A 19mm. H 10mm...
0.18€ Ex Tax: 0.14€
Galvanized Wire Rope 5 Mm. With Hook. Length Mt. 10..
22.17€ Ex Tax: 17.88€
Galvanized Wire Rope 5 Mm. With Hook. Length Mt. 6..
18.48€ Ex Tax: 14.90€
Mirror polished stainless steel fairleads, Right and left...
58.29€ Ex Tax: 47.01€
Mirror polished stainless steel fairleads, Right and left...
82.52€ Ex Tax: 66.55€
Fender Holder Made Of White Plastic. Are Used To Set And Adjust The Height Of The Fenders Without Knots. Universal Rails For Tube Ø Mm.22/25.fenders Rope Ø Mm. 8.dim. Mm. A=70 B=31 C=43...
12.40€ Ex Tax: 10.00€
Gas Spring Mounting Bracket in polished stainless steel. Square bent bracket with reverse attachment point, mm. 50 x 37,5..
12.32€ Ex Tax: 9.93€
Gas Spring Mounting Bracket in polished stainless steel with self-locking nut. Angled bracket with forward attachment point...
11.09€ Ex Tax: 8.94€
Gas Springs in fully stainless steel gas spring for hatches and engine-room doors. Terminal eyes hole Ø mm. 8. Size: Length mm.275, Stroke mm.100, Output force Kg.5, Ø Cylinder mm.18,5, Ø Rod mm.6...
63.35€ Ex Tax: 51.09€
Gas Springs in fully stainless steel gas spring for hatches and engine-room doors. Terminal eyes hole Ø mm. 8. Size: Length mm.375, Stroke mm.150, Output force Kg.10, Ø Cylinder mm.18,5, Ø Rod mm.6 ...
67.75€ Ex Tax: 54.64€
Gas Springs in fully stainless steel gas spring for hatches and engine-room doors. Terminal eyes hole Ø mm. 8. Size: Length mm.525, Stroke mm.220, Output force Kg.20, Ø Cylinder mm.18,5, Ø Rod mm.8 ...
72.79€ Ex Tax: 58.70€
Gas Springs in fully stainless steel gas spring for hatches and engine-room doors. Terminal eyes hole Ø mm. 8. Size: Length mm.585, Stroke mm.250, Output force Kg.20, Ø Cylinder mm.18,5, Ø Rod mm.8 ...
92.38€ Ex Tax: 74.50€
Gas Springs in fully stainless steel gas spring for hatches and engine-room doors. Terminal eyes hole Ø mm. 8. Size: Length mm.700, Stroke mm.300, Output force Kg.40, Ø Cylinder mm.21,5, Ø Rod mm.10...
98.54€ Ex Tax: 79.47€
Rubber bellows cover trasmission for Sail Drive leg Volvo Or. refere:854932 and Yanmar or.ref.196420-02550)..
70.94€ Ex Tax: 57.21€
Kitwith gasket seal ring and 3 oring for mod. Stern Drive, Alpha One or. ref. 27-64818T4..
22.17€ Ex Tax: 17.88€
Superior quality gasoline filter/water separator for inboard and outboard engines. Complete with 10 micron element, die cast head and metal bowl. MICROBLOC technology (99.8% effectiveness in separating water from gasoline)...
91.59€ Ex Tax: 73.86€
Composite drive legwith screws, plugs and gasket...
1,334.03€ Ex Tax: 1,075.83€
Composite drive legwith screws, plugs and gasket...
733.71€ Ex Tax: 591.71€
Composite drive legwith screws, plugs and gasket...
778.18€ Ex Tax: 627.57€
Composite drive legwith screws, plugs and gasket...
779.29€ Ex Tax: 628.46€
Composite drive legwith screws, plugs and gasket...
867.12€ Ex Tax: 699.29€
Spare gypsies for Quick windlasses...
227.62€ Ex Tax: 183.56€
Almost as genuine quality Hi-Line fuel line connectors for Yamaha engines. With safety springlock type connector and front fuel exit connection for a more regular flow...
12.03€ Ex Tax: 9.70€
Mercruiser genuine stern drive gasket set...
14.04€ Ex Tax: 11.32€
The amplifier is a device allowing you to monitor the antenna gain, expressed in dB, by adjusting intensity of the signal input or output. Generally the amplifier allows the adjustment of the signal power in order to optimize the reception: it amplifies the weaker signals or dramps the stronger ones.The amplifier is provided with A/B switch function which, if an alternative TV connection is available (for instance from dock), allows cut off the TV-signal reception of your antenna and to receive ..
128.73€ Ex Tax: 103.82€
UV Resistant flexible Fiberglass or Stainless Steel VHF RA106 FME antenna for any type of boat. The FME connector allows quick and easy installation thanks to the plugged cables and adaptors. 5/8" x 24 Threaded base. 100W / 3db / 156/162 MHz / 50 Ohm. Height: 0.9 m. With the adapter the antenna can be mounted on 1" x 14 threaded bases. The connector allows to connect the FME thread to the PL258 coaxial connection...
56.95€ Ex Tax: 45.93€
Fiberglass VHF RA104 compact antenna for prestige motorboats. 100W / 3db / 156/162 MHz / 50 Ohm. Height: 1 m. Complete with 4.5 m coaxial cable, connector and Nylon or Stainless Steel base...
138.50€ Ex Tax: 111.69€
Goose 45° exhaust syphon for 40/45/50 mm exhaust hoses...
83.62€ Ex Tax: 67.44€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
11.33€ Ex Tax: 9.14€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
13.97€ Ex Tax: 11.27€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
16.74€ Ex Tax: 13.50€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
22.01€ Ex Tax: 17.75€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
21.35€ Ex Tax: 17.22€
Knitted Acrylic marine fabric fender cover. UV rays, sea water and weather conditions resistant.Tested according to law TS4460 / BS EN ISO105 / B04 in grade 7.• tear and abrasion resistant, it covers and protects fender from shock and usury• protects the boat sides avoiding squeak and dirt• easy to install, thanks to the special drawstring closure it fits perfectly all fenders• does not drench and quick dries• long lasting, hand or machine washable at 30°C..
30.05€ Ex Tax: 24.23€
Grey terminal in pvc for radial and C55...
17.25€ Ex Tax: 13.91€
Greased square braided hemp for propellershaft assembly sealing. Package 2 m...
23.10€ Ex Tax: 18.63€
Greased square braided hemp for propellershaft assembly sealing. Package 2 m...
18.48€ Ex Tax: 14.90€
Greased square braided hemp for propellershaft assembly sealing. Package 2 m...
11.09€ Ex Tax: 8.94€
