High water alarm with Ultima Switch featuring digital technology using the patented Mirus field effect. Totally sealed fluid detector is never in contact with water, will not corrode and is not affected by oil or debris. Bilge Alert detects water and sends a signal (3-second delay) to the alarm and switch conveniently mounted on a panel. Three way rocker switch allows alarm to be tested, turned off and armed (Test-Off-Armed)...
BILGE STRAINER WITH NON-RETURN VALVE:
• Designed to prevent bilge debris from blocking the inlet suction line.
• Reduce the risk of debris entering and blocking the pump.
• Maintain prime in the suction line.
• Easy to maintain and clean without use of tools.
IN-LINE NON-RETURN VALVE:
• Designed to install in-line.
• Maintains prime in a suction or discharge line.
• Easy to maintain and clean without use of tools.
Y-CONNECTION:
• Y-connections enable two pumps to discharge through a s..
Low Profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels with bilge pumps mounted beneath inboard or I/O engines. Features our removable cartridge style.
The 750 GPH Low Boy Bilge pumps have easy-to-install Dura-Port discharge ports to eliminate stress
cracking caused by over-tightened hose clamps. The pumps include both a straight and a 90° smooth elbow. Use Electro-Magnetic Float Switch (Part No. 34-1900B-12V) only...
Cartridge Pumps incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. The 500 GPH, 750 GPH, and 1000 GPH pumps come with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered with both straight and a 90° smooth elbow Dura-Ports, as well as a removable check valve...
Martyr Aluminum M2 alloy anodes for Johnson/Evinrude outboard engines.
• Protect 50% longer than traditional zinc anode
• Weigh 50% less than traditional zinc anodes ..
The five chamber Aqua Jet Water Pressure Pump "WPS" series provides a reliable heart for
small boat and recreational vehicle water pressure systems. Compared to conventional three or
four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water
pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank.
Always use a PUMProtector inlet strainer before the pump intake. Pressure Cut Off: 2.8 bar / 41 psi...
The five chamber Aqua Jet Water Pressure Pump "WPS" series provides a reliable heart for
small boat and recreational vehicle water pressure systems. Compared to conventional three or
four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water
pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank.
Always use a PUMProtector inlet strainer before the pump intake. Pressure Cut Off: 2.8 bar / 41 psi...
The five chamber Aqua Jet Water Pressure Pump "WPS" series provides a reliable heart for
small boat and recreational vehicle water pressure systems. Compared to conventional three or
four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water
pulsation characteristics.
It is recommended to install the WPS-pumps with an accumulator tank.
Always use a PUMProtector inlet strainer before the pump intake. Pressure Cut Off: 2.8 bar / 41 psi...
The whisper quiet self-priming Aqua Jet Flow Master WPS 5.0 pump incorporates state-of-the-art
electronics to automatically control pump speed. The digital controller adjusts water flow as the
demand is increased and decreased while maintaining a very smooth flow. The unique variable flow
feature of the Aqua Jet Flow Master WPS 5.0 pump makes it a smart choice for better flow, lower
noise and less amp draw. PUMProtector Inlet Strainer included. Recommended to install with an
accumulator tank. P..
The whisper quiet self-priming Aqua Jet Flow Master WPS 5.0 pump incorporates state-of-the-art
electronics to automatically control pump speed. The digital controller adjusts water flow as the
demand is increased and decreased while maintaining a very smooth flow. The unique variable flow
feature of the Aqua Jet Flow Master WPS 5.0 pump makes it a smart choice for better flow, lower
noise and less amp draw. PUMProtector Inlet Strainer included. Recommended to install with an
accumulator tank. P..
Equipped with combined 12V or 24V pump for disposal and flushing. Centrifugal pump with macerator function for disposal and an impeller pump for filling water. Available in three models: Super Compact, Compact and Comfort...
Equipped with combined 12V or 24V pump for disposal and flushing. Centrifugal pump with macerator function for disposal and an impeller pump for filling water. Available in three models: Super Compact, Compact and Comfort...
Incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. Available in three models: Super Compact, Compact and Comfort...
Vacuum Ocean Luxury Silent Hydrovacuum toilet with electronic water in/out control. Very silent, great comfort (feels like home), very low water consumption. Anti-shock porcelain bowl with soft-closing seat. It can be installed either above or below the sea level. Drainage of waste up to 7 meters in height thanks to built-in macerator pump. Water inlet ø 19 mm (3/4"). Outlet ø 38 mm (1"1/2) adjustable to 25 mm (1").
To be completed with water flush load pump. When installing a series of toilets..
Vacuum Ocean Luxury Silent Hydrovacuum toilet with electronic water in/out control. Very silent, great comfort (feels like home), very low water consumption. Anti-shock porcelain bowl with soft-closing seat. It can be installed either above or below the sea level. Drainage of waste up to 7 meters in height thanks to built-in macerator pump. Water inlet ø 19 mm (3/4"). Outlet ø 38 mm (1"1/2) adjustable to 25 mm (1").
To be completed with water flush load pump. When installing a series of toilets..
Vacuum Ocean Luxury Silent Hydrovacuum toilet with electronic water in/out control. Very silent, great comfort (feels like home), very low water consumption. Angled back model fit to better lean the bowl against angled or curved walls. Anti-shock
porcelain bowl with soft-closing seat. It can be installed either above
or below the sea level. Drainage of waste up to 7 meters in height
thanks to built-in macerator pump. Water inlet ø 19 mm (3/4"). Outlet ø
38 mm (1"1/2) adjustable to 25 mm (1")..
Vacuum Ocean Luxury Silent Hydrovacuum toilet with electronic water in/out control. Very silent, great comfort (feels like home), very low water consumption. Anti-shock porcelain bowl with soft-closing seat. It can be installed either above or below the sea level. Drainage of waste up to 7 meters in height thanks to built-in macerator pump. Water inlet ø 19 mm (3/4"). Outlet ø 38 mm (1"1/2) adjustable to 25 mm (1").
To be completed with water flush load pump. When installing a series of toilets..
Vacuum Ocean Luxury Silent Hydrovacuum toilet with electronic water in/out control. Very silent, great comfort (feels like home), very low water consumption. Anti-shock porcelain bowl with soft-closing seat. It can be installed either above or below the sea level. Drainage of waste up to 7 meters in height thanks to built-in macerator pump. Water inlet ø 19 mm (3/4"). Outlet ø 38 mm (1"1/2) adjustable to 25 mm (1").
To be completed with water flush load pump. When installing a series of toilets..
Designed for silent flush and built-in pump for disposal. Centrifugal pump with macerator function and a well-proven Aqua Jet diaphragm pump. Controlled with a three-way control panel.
Available in 12V/24V and two models: Compact and Comfort...
Designed for silent flush and built-in pump for disposal. Centrifugal pump with macerator function and a well-proven Aqua Jet diaphragm pump. Controlled with a three-way control panel.
Available in 12V/24V and two models: Compact and Comfort...
The switch panel gives you full control of the equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch. The three-position switch panel has an integrated fuse holder and operating light. Note! Fuses are not included...
The AS888 automatic float switch has a time-proven micro switch without mercury. When water
exceeds the acceptable level, the pump is turned on by a rolling steel ball, which changes the pressure on the micro switch. For fully automatic bilge pumping operation, connect the automatic switch to your bilge pump. The AS888 attaches to any SPX FLOW Johnson Pump bilge pump through a clip on ”T-slot” and can be used with 12, 24 or 32V systems...
BILGE STRAINER WITH NON-RETURN VALVE:
• Designed to prevent bilge debris from blocking the inlet suction line.
• Reduce the risk of debris entering and blocking the pump.
• Maintain prime in the suction line.
• Easy to maintain and clean without use of tools.
IN-LINE NON-RETURN VALVE:
• Designed to install in-line.
• Maintains prime in a suction or discharge line.
• Easy to maintain and clean without use of tools.
Y-CONNECTION:
• Y-connections enable two pumps to discharge through a s..
Johnson fresh and salt water pump.
Neoprene impeller, Bronze body, Stainless Steel shaft. Max 2000 RPM.
Attention:
Electromagnetic clutch with pulley sold separately...
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. The benefit is less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar /12 psi.
Volume 2 l, height 315 cm, ø 160 mm, weight 1,2 kg...
The 2200 GPH motor is sealed off by a mechanical seal design, while the 1600 GPH model has a lipseal. The 4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, generous wire length and unique threaded port design.
The impeller is carefully designed and tested to maximize head and flow. The universal base plate and a choice of two different ports sizes makes for a simple installation. Removable check valve included...
BILGE STRAINER WITH NON-RETURN VALVE:
• Designed to prevent bilge debris from blocking the inlet suction line.
• Reduce the risk of debris entering and blocking the pump.
• Maintain prime in the suction line.
• Easy to maintain and clean without use of tools.
IN-LINE NON-RETURN VALVE:
• Designed to install in-line.
• Maintains prime in a suction or discharge line.
• Easy to maintain and clean without use of tools.
Y-CONNECTION:
• Y-connections enable two pumps to discharge t..
The TA3P10-19 macerator pump takes care of toilet waste. A rotary cutter shreds waste before it is pumped into or out from the holding tank. The pump should be connected as close as possible to the holding tank discharge outlet. Note! Use unbleached lavatory paper only...
Livewell pumps in 500 GPH and 750 GPH capacities with two different intake configurations of
straight and 90°. Smaller profiles to fit in more confined spaces. Easy to change motor cartridge...
Livewell pumps in 500 GPH and 750 GPH capacities with two different intake configurations of
straight and 90°. Smaller profiles to fit in more confined spaces. Easy to change motor cartridge...
KlickTite port connectors are available for the most common hose diameters and make it possible to remove the entire unit for thorough cleaning wherever it’s most convenient. They also make it possible to drain the system quickly for effortless winterizing without the use of any tools...
The 2200 GPH motor is sealed off by a mechanical seal design, while the 1600 GPH model has a lipseal. The 4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, generous wire length and unique threaded port design.
The impeller is carefully designed and tested to maximize head and flow. The universal base plate and a choice of two different ports sizes makes for a simple installation. Removable check valve included...
The 2200 GPH motor is sealed off by a mechanical seal design, while the 1600 GPH model has a lipseal. The 4000 GPH features a robust motor design, mechanical shaft seal, high impact ABS plastic, generous wire length and unique threaded port design.
The impeller is carefully designed and tested to maximize head and flow. The universal base plate and a choice of two different ports sizes makes for a simple installation. Removable check valve included...
Cartridge Pumps incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. The 500 GPH, 750 GPH, and 1000 GPH pumps come with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered with both straight and a 90° smooth elbow Dura-Ports, as well as a removable check valve...
Ultima Combo bilge pump is equipped with the non-clogging electronic switch Ultima Switch for automatic operation. The 500 GPH -1000 GPH pumps have easy-to-install Dura-Port discharge ports
to eliminate stress cracking caused by overtightened hose clamps. The pumps are delivered with both straight and a 90° smooth elbow Dura-Ports, as well as a removable check valve...
Low Profile pump design for ease of mounting and removal in tight bilge areas. Perfect for vessels with bilge pumps mounted beneath inboard or I/O engines. Features our removable cartridge style.
The 750 GPH Low Boy Bilge pumps have easy-to-install Dura-Port discharge ports to eliminate stress
cracking caused by over-tightened hose clamps. The pumps include both a straight and a 90° smooth elbow. Use Electro-Magnetic Float Switch (Part No. 34-1900B-12V) only...
The Heavy Duty range of multi-purpose bronze pumps are raw water resistant and have a compact design. These pumps are designed for a number of applications onboard and have gained a time-tested reputation for quality and reliability.
With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel-transfer pumps and other applications. These pumps are also ideally suited on shore for emptying septic ta..
The Heavy Duty range of multi-purpose bronze pumps are raw water resistant and have a compact design. These pumps are designed for a number of applications onboard and have gained a time-tested reputation for quality and reliability.
With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel-transfer pumps and other applications. These pumps are also ideally suited on shore for emptying septic ta..
The Heavy Duty range of multi-purpose bronze pumps are raw water resistant and have a compact design. These pumps are designed for a number of applications onboard and have gained a time-tested reputation for quality and reliability.
With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel-transfer pumps and other applications. These pumps are also ideally suited on shore for emptying septic ta..
The Heavy Duty range of multi-purpose bronze pumps are raw water resistant and have a compact design. These pumps are designed for a number of applications onboard and have gained a time-tested reputation for quality and reliability.
With excellent self-priming capability, these pumps are ideal as cooling water pumps for marine engines, bilge pumps, deckwash pumps, fresh water pumps, fuel-transfer pumps and other applications. These pumps are also ideally suited on shore for emptying septic ta..