-
Your shopping cart is empty!
Electro-hydraulic Bennett Trim Tabs kit complete with: two standard actuators, hoses with fittings, control unit and electric cables. Tabs planes and control panel have to be ordered separately...
1,256.34€ Ex Tax: 1,013.18€
Electromagnetic trumpetsmall but very powerful, body and horn brass painted white.Sound level 114 dB, 350 Hz, length mm. 250...
99.94€ Ex Tax: 80.60€
Renews, cleans and restores the original color of the inflatables aged by the sun, smog and salt. Suitable for all types of rubber. Spray on rubber and, after few minutes, brush and rinse...
71.64€ Ex Tax: 57.77€
Led Flashing Light For Belts And Life Jackets Approved Solas, Approved In Compliance With International Standards Imo Msc 81 (70) And Directive Med 2002/75 / Ec. Manual Activation. Operating Time Exceeding 8 Hours. Battery Included. Dim. Mm. 93x48...
13.86€ Ex Tax: 11.18€
Plastic steps and rope safety boarding ladder stored in a portable bag. Ready to use, it has to be dropped off the boat to safely get back aboard. Polyester straps and reinforced ABS steps...
57.11€ Ex Tax: 46.06€
TCD Quick control panels with push-buttons or Joysticks for operating bow-thruster propellers. Simple and intuitive user interface. Universal 8-30 Vdc power supply. Possibility of connecting several TCD controls in parallel. Easy to install thanks to the 2-wire connector (optional extensions). Automatic priority system and disablement. Protection against reverse polarity, short circuit output, prolonged activity of motor and interruption of thruster controls wiring...
270.32€ Ex Tax: 218.00€
Stainless Steel declined base for biminis. With easy off pin and security block...
8.51€ Ex Tax: 6.86€
Start and services batteries for professional use CA100 technology, long life, high cyclic stability, maximum power cold start or large-displacement engines, ready to use, zero maintenance, maximum safety thanks to Labyrinth lid, the flame arrestor and the special caps. Dim. mm. 513x223x223..
538.29€ Ex Tax: 434.11€
Start and services batteries for professional use CA100 technology, long life, high cyclic stability, maximum power cold start or large-displacement engines, ready to use, zero maintenance, maximum safety thanks to Labyrinth lid, the flame arrestor and the special caps. Dim. mm. 518x276x242..
644.78€ Ex Tax: 519.98€
Start and services batteries, zero maintenance, reliability in all weather and an extraordinary power for high absorption. Immediately ready to go, longer life, technology CA100. Safety lid with flame arrestor, central degassing. Dim. mm. 248x175x190..
234.43€ Ex Tax: 189.06€
Start and services batteries, zero maintenance, reliability in all weather and an extraordinary power for high absorption. Immediately ready to go, longer life, technology CA100. Safety lid with flame arrestor, central degassing. Dim. mm. 278x175x190..
284.32€ Ex Tax: 229.29€
Start and services batteries, zero maintenance, reliability in all weather and an extraordinary power for high absorption. Immediately ready to go, longer life, technology CA100. Safety lid with flame arrestor, central degassing. Dim. mm. 353x175x190..
373.51€ Ex Tax: 301.22€
Start and services batteries for professional use CA100 technology, long life, high cyclic stability, maximum power cold start or large-displacement engines, ready to use, zero maintenance, maximum safety thanks to Labyrinth lid, the flame arrestor and the special caps. Dim. mm. 513x189x223..
491.48€ Ex Tax: 396.36€
PVC coated nylon engine cover in Royal Blue, the band allows the terminal through an appropriate locking line to make it stick perfectly to the engine...
39.20€ Ex Tax: 31.61€
Engine flusher for outboard motors and sterndrive gear hoods with water supply on both sides with a quick garden-style attachment. Fork in steel plasticized with round rubber suction cups Ø mm.90..
22.03€ Ex Tax: 17.77€
Engine flusher for outboard motors and sterndrives washing unit with water supply on one side with a quick type gardening attachment. Plastic-coated fork with round rubber suction cups Ø mm.90..
9.46€ Ex Tax: 7.63€
Manual pump for engine oil extractionbody in brass and nylon, alt. mm. 230.Inlet pipe Ø mm. 6, outlet tube Ø mm. 9..
17.28€ Ex Tax: 13.94€
Flexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..
193.06€ Ex Tax: 155.69€
Flexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..
193.06€ Ex Tax: 155.69€
Flexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..
96.54€ Ex Tax: 77.86€
Flexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..
105.32€ Ex Tax: 84.93€
Flexible mounts for large power Diesel engines. 110mm length M16 threaded stud. (SH = Shore)..
91.59€ Ex Tax: 73.86€
Flexible mounts for small power Diesel engines. 100mm length M12 threaded stud. (SH = Shore)..
43.88€ Ex Tax: 35.39€
Flexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..
43.88€ Ex Tax: 35.39€
Flexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..
48.27€ Ex Tax: 38.93€
Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..
133.33€ Ex Tax: 107.52€
Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..
133.33€ Ex Tax: 107.52€
Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...
67.75€ Ex Tax: 54.64€
Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...
86.23€ Ex Tax: 69.54€
Antivibration elastic support for engine made by vulcanizing the rubber to metal to achieve the best results.The rubber used is a compound based on NBR that ensures the best elastic properties. Hardness Shore 55%...
123.18€ Ex Tax: 99.34€
Flexible mounts for large power Diesel engines. Det Norske Veritas certified. 130 mm length M20 threaded stud. (SH = Shore)..
193.06€ Ex Tax: 155.69€
Flexible mounts for medium power Diesel engines. Det Norske Veritas certified. 110 mm length M16 threaded stud. (SH = Shore)..
91.59€ Ex Tax: 73.86€
Flexible mounts for medium power Diesel engines. 100mm length M12 threaded stud. (SH = Shore)..
61.44€ Ex Tax: 49.54€
Flexible mounts for small power Diesel engines. Det Norske Veritas certified. 100 mm length M12 threaded stud. (SH = Shore)..
42.83€ Ex Tax: 34.54€
V structure flexible mount for big stress with little load. For small engines working most of the time at low run...
120.15€ Ex Tax: 96.89€
V structure flexible mount for big stress with little load. For small engines working most of the time at low run...
120.15€ Ex Tax: 96.89€
V structure flexible mount for big stress with little load. For small engines working most of the time at low run...
120.15€ Ex Tax: 96.89€
Vetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..
142.32€ Ex Tax: 114.78€
Vetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..
142.32€ Ex Tax: 114.78€
Vetus HY engine mounts for small and medium power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..
142.32€ Ex Tax: 114.78€
Vetus K engine mounts for small power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..
98.18€ Ex Tax: 79.17€
Vetus K engine mounts for small power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..
98.18€ Ex Tax: 79.17€
Vetus K engine mounts for small power Diesel engines. 100mm length M16 threaded stud. (SH = Shore)..
98.18€ Ex Tax: 79.17€
Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..
133.33€ Ex Tax: 107.52€
Yanmar Type flexible mounts for small and medium power Diesel engines. 70mm length M16 non-removable threaded stud. (SH = Shore)..
133.33€ Ex Tax: 107.52€
Suzuki DT115/140 (4ST) engine skeg anode. Zn = Zinc..
33.87€ Ex Tax: 27.32€