-
Your shopping cart is empty!
Kevlar Tape specifically designed to repair Kevlar sails...
28.85€ Ex Tax: 23.26€
Key start switch built in polypropylene, for outboard motors. 12 V.,10 Amp. 7 Terminals, 4 positions :ACC-OFF-IGN-START...
23.10€ Ex Tax: 18.63€
Stops the outboard engine in case of man overboard. ..
7.56€ Ex Tax: 6.09€
Washdown & Baitwell Pump. High velocity pump for anchor and general deck washdown. Compact size with matched hi-output spray nozzle. Corrosion resistant coated motor and sealed pressure switch for fresh or salt water use. Also great for continuous duty operation in livewell application at full flow. It comes with a pair of threaded fittings 3/4 “, a pair of hose barb, inlet strainer and spray nozzle..
419.00€ Ex Tax: 337.91€
Washdown & Baitwell Pump. High velocity pump for anchor and general deck washdown. Compact size with matched hi-output spray nozzle. Corrosion resistant coated motor and sealed pressure switch for fresh or salt water use. Also great for continuous duty operation in livewell application at full flow. It comes with a pair of threaded fittings 3/4 “, a pair of hose barb, inlet strainer and spray nozzle..
433.45€ Ex Tax: 349.56€
Kit for sail repair including : 1 hand-guard, 1 kit 5 needles original english,1 polyester coil. mm 1. mt. 50, mt. 2.10 cloth adhesive sail repair...
68.56€ Ex Tax: 55.29€
KIT K14B for cables C2-C8-MachZero-33C on engines Yamaha 9,9 D / 15 D..
178.36€ Ex Tax: 143.84€
Kit K14F for cables C2-C8-MachZero-33C on engines Yamaha 9,9 D/FT9,9D / F15A..
259.38€ Ex Tax: 209.17€
Kit K25 to fit C2, Mach Zero, C7, C8, 33C cable to control B47/49. For Yamaha, Suzuki, Mariner, Chrysler...
22.36€ Ex Tax: 18.03€
Kit K35 to fit cables C5, C16 and Mach5 to single lever controls for Mercury and Mariner, except controls B301, B302, B103, B104...
27.95€ Ex Tax: 22.54€
Kit K36 for cables C2-C8-MachZero-33C on engines Yamaha 6C / 6D / 8C..
190.87€ Ex Tax: 153.93€
Kit K51 connection to engine for cable C14and Mach14 to be used on single lever B89 and B90...
20.32€ Ex Tax: 16.39€
Kit K56 for cables C2 - MachZero - C8 - 33C on engines Mercury..
39.12€ Ex Tax: 31.55€
Kit K57 for cables C2 - MachZero - C8 - 33C on engines OMC, Johnson, Evinrude..
39.12€ Ex Tax: 31.55€
Kit K66 for mounting cable M66 to steeringT71 T72 T73 T81 T82 T83. Productionbefore year 2001...
26.42€ Ex Tax: 21.31€
Kit K8 for cable C2, Mach Zero on engines Yamaha 20C, 20D, 20V, 25D, 30A and 30G...
78.25€ Ex Tax: 63.10€
Clevis with inner thread, 10-32 UNF To be used on cables : C2 Mach Zero C7 C8 33C..
13.21€ Ex Tax: 10.65€
L3 collar anode with inserts for Kamewa JET FF 375S/CLASS V2000...
604.54€ Ex Tax: 487.53€
Stainless steel folding boarding ladder, tube Ø mm. 25, wooden steps, spare part for art. 3030421/428/438/439..
89.69€ Ex Tax: 72.33€
Stainless steel telescopic boarding ladder swivelling above platform mounting. Non-slip steps made of black plastic...
120.24€ Ex Tax: 96.97€
Nylon cowl vent for a good airing. Put on deck hatch and hanged to ahalyard through the included eyelet. Complete with case. Base cm.50 x Total height cm. 185...
59.38€ Ex Tax: 47.88€
Lather reinforced hand-guard to sew and splice...
22.36€ Ex Tax: 18.03€
Treated genuine leather fine protection for crosstrees. Four sizes avaiable. The inner side is lined with Neoprene for a perfect fit. The protection is complete with a long Velcro strap to fit even wide crosstrees. Just cut the Velcro strap to a suitable length and mount the boot with the Velcro in the inner side. Sold in pairs. ..
70.21€ Ex Tax: 56.62€
Treated genuine leather fine protection for crosstrees. Four sizes avaiable. The inner side is lined with Neoprene for a perfect fit. The protection is complete with a long Velcro strap to fit even wide crosstrees. Just cut the Velcro strap to a suitable length and mount the boot with the Velcro in the inner side. Sold in pairs. ..
57.05€ Ex Tax: 46.01€
Treated genuine leather fine protection for crosstrees. Four sizes avaiable. The inner side is lined with Neoprene for a perfect fit. The protection is complete with a long Velcro strap to fit even wide crosstrees. Just cut the Velcro strap to a suitable length and mount the boot with the Velcro in the inner side. Sold in pairs. ..
61.44€ Ex Tax: 49.54€
1W LED anchor light for boats up to 12 meters...
35.70€ Ex Tax: 28.79€
Fin for Yamaha 150-200 HP engine (or. Ref.6k1-45371-02)..
26.49€ Ex Tax: 21.36€
Fin for Yamaha 150-200 HP engine (or. Ref.6k1-45371-02)..
33.73€ Ex Tax: 27.20€
Fin for Yamaha 150-200 HP engine (or. Ref.6k1-45371-02)..
34.76€ Ex Tax: 28.03€
Durable and lightweight nylon tape for repairing sails and spinnaker, made with the best fabric quality. Even in adverse weather conditions this adhesive can repair quilcky and long lasting torn sails at sea. Height mm. 50, roll da m. 4,8..
18.53€ Ex Tax: 14.94€
Scotch tapein bright vinyl for water lines and decorations..
36.95€ Ex Tax: 29.80€
Scotch tapein bright vinyl for water lines and decorations..
66.52€ Ex Tax: 53.64€
Scotch tapein bright vinyl for water lines and decorations..
84.99€ Ex Tax: 68.54€
Scotch tapein bright vinyl for water lines and decorations..
52.66€ Ex Tax: 42.47€
Premium quality motor covers for outboard motors, made of the same fabric which is used for soft and sturdy Fendress fender covers. Protects from rubbing wear, from weathering, bumps, scratches, UV rays and it might even be left on the motor while cruising. Fenboard Covers are made of breathable fabric (do not create condensation) and do not fade. Machine wash and quick drying. With the Fendboard motor cover your outboard motor will remain as new for longer. Attention: fitting and sizes will n..
82.36€ Ex Tax: 66.42€
Complete link arm Johnson Evinrude for M55...
143.29€ Ex Tax: 115.55€
304 Steel needles perfect for all core-cover splices. ..
121.76€ Ex Tax: 98.20€
304 Steel needles perfect for all core-cover splices. ..
110.17€ Ex Tax: 88.84€
Fully chromed bronze resistant to marine corrosion.Gypsy suitable for rope and chain. Windlass suitable for boats from 6 to 9 mt. Complete with control box and handle...
1,167.27€ Ex Tax: 941.35€
Fully chromed bronze resistant to marine corrosion.Gypsy suitable for rope and chain. Windlass suitable for boats from 6 to 9 mt. Complete with control box and handle...
1,169.50€ Ex Tax: 943.14€
Fully chromed bronze resistant to marine corrosion.Gypsy suitable for rope and chain. Suitable for boats from 8 to 14 mt. High with drum and gipsy.Complete with control box and handle...
1,568.59€ Ex Tax: 1,264.99€
Fully chromed bronze resistant to marine corrosion.Gypsy suitable for rope and chain. Suitable for boats from 8 to 14 mt. Low with gipsyonly. Complete with control box and handle...
1,517.45€ Ex Tax: 1,223.75€
Fully chromed bronze resistant to marine corrosion.Gypsy suitable for rope and chain. Suitable for boats from 8 to 14 mt. High with drum and gipsy.Complete with control box and handle...
1,567.48€ Ex Tax: 1,264.10€
Fully chromed bronze resistant to marine corrosion.Gypsy suitable for rope and chain. Suitable for boats from 8 to 14 mt. Low with gipsyonly. Complete with control box and handle...
1,528.57€ Ex Tax: 1,232.72€
Long damper insert for gearbox flexible couplings...
11.07€ Ex Tax: 8.93€
Long guardfender for jetty sides, piers, fingers protection. Pressure regulation valve included...
45.73€ Ex Tax: 36.88€
Anode for ALPHA ONE -Bravo I-II-III engine (or. ref. 762144)..
21.98€ Ex Tax: 17.73€
Fin for 75/130 HP engine (Or. Ref. 41107 ZW1 BO1ZA )..
33.49€ Ex Tax: 27.00€