-
Your shopping cart is empty!
Your shopping cart is empty!
High quality Polyester fabric flags...
11.86€ Ex Tax: 9.56€
Descaler, desalinizer and deoxidizer detergent. Specific for hull rust stains removal, Stainless Steel and Chromed surfaces polishing. Excellent descaler for engines cooling circuit...
20.25€ Ex Tax: 16.33€
High strength resin Ball Bearing Mini Snatch Block D=32 mm. It can be fastened both with a line or with a shackle. The Snap Ring is a line loop with an easy locking system to avoid accidental opening...
38.87€ Ex Tax: 31.35€
The cheekplate revolves around the sheave axle allowing the block to open; a safety ball prevent the block from opening and an adjustable screw allows to set the ball on locked position. There is a becket for the “hanging line”. Material: sheave with composite fibre main bearing and double side ball bearing. Hard anodized and teflon coated aluminium cheekplates with side rubber protections (yellow rubber on the revolving cheekplate)...
220.73€ Ex Tax: 178.01€
Specific detergent for descaling surfaces in contact with salt water, specially from keels and stern drives...
13.42€ Ex Tax: 10.82€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Navigation lights R.I.Na. approval. Black reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval. Supplied without bulb. Fresnel lens-resistant polycarbonate...
78.04€ Ex Tax: 62.94€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Navigation lights R.I.Na. and MED 96/98 approval - EC for commercial boat. Black Polycarbonate, stainless steel wall bracket, complete with certificate. Supplied without lamp...
151.51€ Ex Tax: 122.19€
Floating handbearing Riviera Orion compass with 1"7/8 (-50 mm) rose. Shock resistant. 10° Graduated rotating bezel. Dimensions: 100 x 70 x 27 mm...
65.10€ Ex Tax: 52.50€
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
390.51€ Ex Tax: 314.93€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Corrosion, electrolysis and fuel resistant bilge pumps.Of rugged construction, they produce high capacityoutput with the convenience of many mounting positions(see drawings). Hose diameter Ø mm. 38. Maximum lift mt. 3. Spare diaphragm art. p16217..
124.01€ Ex Tax: 100.01€
Diesel and gasoline engine ignition switch with rubber cap. Brass body, diameter 45 mm. 4 Terminals - 4 Positions...
32.62€ Ex Tax: 26.30€
Product mentioned in the case of bacterial contamination of reservoirsand tanks of diesel. Suitable for the treatment of diesel, biodiesel, andmixtures thereof. Ensures effective biocidal action at points of higherconcentration of bacteria, avoiding clogging and / or rupture of filters,injectors, etc.. Pour the product into the tank before filling. Use 1 liter ofoil every 1000-2000lt...
71.58€ Ex Tax: 57.72€
Diesel filter dim.Ø ext.mm.96 Seal Ø mm. 72 height mm.120 step M 20 X 1.5, equipped with drain..
33.26€ Ex Tax: 26.82€
Different thickness angled Plastic transom pads. To balance perfectly the engine...
11.26€ Ex Tax: 9.08€
Disassembling 3 Arches sun-water bimini top. 316 Stainless Steel frame, 100% Polyester PVC coated fabric. With the optional pole supports it can be mounted as a Roll-Bar...
1,289.21€ Ex Tax: 1,039.68€
Disassembling 3 Arches sun-water bimini top. 316 Stainless Steel frame, 100% Polyester PVC coated fabric. With the optional pole supports it can be mounted as a Roll-Bar...
1,289.21€ Ex Tax: 1,039.68€
Disassembling 3 Arches sun-water bimini top. 316 Stainless Steel frame, 100% Polyester PVC coated fabric. With the optional pole supports it can be mounted as a Roll-Bar...
1,289.21€ Ex Tax: 1,039.68€
Disassembling Anodized Aluminum kayak paddle with reinforced Plastic blades...
57.46€ Ex Tax: 46.34€
Special material pads that soak up oil and fuel but do not absorb water. They absorb 20-30 times their weight of oil or fuel and can be placed into the bilge or engine room. They represent the most effective way to clean up or avoid an oil or fuel spill...
2.40€ Ex Tax: 1.93€
Telescopic foldable electropolished Stainless Steel ladders. Easy boarding for swimmers or divers with fins and heavy gear thanks to the central support and steps free on both sides...
390.66€ Ex Tax: 315.05€
Compulsory on tender.Made of 100 % polyester bunting.Pack of 10 pcs...
11.73€ Ex Tax: 9.46€
Compact diving knife with line cutter and shackle opener hole. The Stainless Steel handle and only 4 mm reduced thickness make this knife perfect for diving. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
34.64€ Ex Tax: 27.94€
Diving knife with line cutter and shackle opener. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
32.81€ Ex Tax: 26.46€
Diving Knife With Sheath And Hammer, Coloured Handle, Stainless Steel Blade, Total Length Mm.310, Blade Length Mm.185..
65.99€ Ex Tax: 53.22€
Diving Knifewith Sheath, Coloured Handle, Stainless Steel Blade, Total Length Mm.270, Blade Length Mm.140..
45.45€ Ex Tax: 36.65€
Marine grade superior quality soft and durable gloss finish Vinyl ribbed Fenders. Heavy duty seamless construction with two reinforced eyelets...
10.66€ Ex Tax: 8.60€
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 45/55 Tonnes, Tbreaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
1,000.52€ Ex Tax: 806.87€
BC60 corner bumper, offers perfect protection for pontoons, berths and docks' corners and edges. Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
165.22€ Ex Tax: 133.25€
B80/90 long and slim bumper for berths, pontoons, fingers and haulage docks. Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
59.04€ Ex Tax: 47.61€
B80/90 long and slim bumper for berths, pontoons, fingers and haulage docks. Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
114.91€ Ex Tax: 92.67€
B60/100 large compact bumper for berths, pontoons and haulage docks. Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
171.31€ Ex Tax: 138.16€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
227.62€ Ex Tax: 183.56€
Ready to use dock braid line with hand pre-spliced and finished Stainless Steel thimble. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
223.43€ Ex Tax: 180.18€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
478.00€ Ex Tax: 385.48€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
478.00€ Ex Tax: 385.48€
Ready to use dock braid line with hand pre-spliced and finished Stainless Steel thimble. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
262.96€ Ex Tax: 212.06€
Ready to use dock braid line with hand pre-spliced, seamed and finished eye. Supplied with naked eye or with Dyneema sewed and finished marine grade leather eye cover. Also the end terminal is hand finished and sewed to avoid imperfections. Strong and soft, made of 16 plaited high tenacity Polyester, with maximum abrasion resistance sheath. Non floating. daN= breaking strength in Kg..
299.50€ Ex Tax: 241.53€
