Search - stainless steel rigging screws with two fixed jaws 10 mm for yachts en?tag=M10

Search Criteria

Products meeting the search criteria

Show:
Sort By:

Battery powered LED navigation lights with suction cup red/green

Battery powered LED navigation lights with suction cup, pole or clamp mount. Works with not included 2 x D type battery...

17.79€ Ex Tax: 14.35€

battery powered navigation white 360° lights with clamp mount and pole

Battery powered navigation lights with clamp mount and pole. Works with not included 2 x D type battery...

27.94€ Ex Tax: 22.53€

battery switch with remote control

Battery switch BEPwith remote control. Particularly suitable when battery cables are toolong and can cause problems. It is possible so to shorten their length.Equipped with a manual operation. Max capacity: 300 Amp continuous,1250 Amp during starting cycle...

277.15€ Ex Tax: 223.51€

battery switch with removable clip-on connection key 280 amp

Battery switchwith removable clip-on connection key. Max capacity: 280 Ampcontinuous, 450 Amp intermittent. Silver-plated copper terminalsconnection Ø mm. 9.5, flange Ø mm. 72 mm. width. 60. Flush or surfacemounting...

32.33€ Ex Tax: 26.08€

battery switches 140a with abs cover

Coverin white ABS with battery switches (3939170) with removable key.Max capacity: 140 Amp continuous, 2000 Amp for 3 secondes.Silver-plated copper contacts. Size mm. 100x105, built in mm Ø 80,depht including contacts mm. 80...

67.19€ Ex Tax: 54.18€

Battery terminal made in galvanized brass 10mm - Positive

Battery terminal made in galvanized brass.Fastening with wing-nut. Negative bolt Ø mm. 8, positive bolt Ø mm. 10..

6.16€ Ex Tax: 4.97€

Battery terminal made in galvanized brass 8mm - Negative Bestseller

Battery terminal made in galvanized brass 8mm - Negative

Battery terminal made in galvanized brass. Fastening with wing-nut. Negative bolt Ø mm. 8,..

6.16€ Ex Tax: 4.97€

bell board ø mm.100

Bell boardin polished brass with swinging attack..

34.02€ Ex Tax: 27.43€

bellows for Mercruiser Alpha Generation II 816431A1

Bellows ALPHA GENERATION IIOriginal reference: 816431A1..

55.43€ Ex Tax: 44.70€

Belt cutter accessory blade for portable rope cutter device

Belt cutter accessory blade for portable rope cutter device, for the product 1-B-3190003...

34.92€ Ex Tax: 28.16€

Bennet control panel 70x70x40 mm

2 tactile switches. Dims. mm.70x70x40 depth. Warning : Never push at same time buttons up and down.Motor is irretrievably damaged (burnt).To avoid motor damaged use relay art. 5410826, 5410827...

198.32€ Ex Tax: 159.93€

Bennett trim tab kit 12v Bolt 129- 300 x 230mm

Electric 12V Bennett trim tab kit complete with 2 actuators, 2 Stainless Steel tabs and control unit. For boats from 5.8 to 7.3 meters. Control panel have to be ordered separately. Panel cod. 4723535: standard up-down control panel. Panel cod. 4723537: up-down control panel with Auto Tab Retractor (automatically retracts the flaps once the keys are withdrawn).  Panel cod. 4723539: up-down control panel with Auto Tab Retractor (automatically retracts the flaps once the keys are withdrawn) ..

1,289.49€ Ex Tax: 1,039.92€

Bennett trim tabs kit M80 with Stainless Plates 200x250 mm

Trim tabs kit for small boats. The particular shape of the blades provides a force on plane 30% higher than conventional flaps. Thanks to their space-saving design can be installed on any stern. The kit contains: control flaps electro hydraulic with oil tank, 2 actuators (length mm. 290 mm stroke. 58), 2 stainless steel tables, joints, hydraulic hose mt. 6, shielded electrical cable mt. 6.50, control panel with 2 toggle switches...

1,156.16€ Ex Tax: 932.38€

BERMUDA TECH SLAM STEEL 3XL

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL M

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL S

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL XL

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL XS

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BERMUDA TECH SLAM STEEL XXL

Technical fabric streched cargo Slam tech shorts. Reinforced seat with abrasion resistant fabric, removable seat pads. Bacteriostatic, quick drying, allows the inside moisture to pass quickly to exterior. The structure of these garments allow easy body movements...

140.34€ Ex Tax: 113.18€

BG 108 diaphragm motor pump 12 v

BG 108 diaphragm motor pumpswith an aluminium gear and rubber dumpers, this pump has a gooddelivery and it runs silently. It does not need any particular maintenanceand has the same application of PK 10 pump. Capacity 20 Lt./min...

434.24€ Ex Tax: 350.20€

BG 108 diaphragm motor pump 24 v

BG 108 diaphragm motor pumpswith an aluminium gear and rubber dumpers, this pump has a gooddelivery and it runs silently. It does not need any particular maintenanceand has the same application of PK 10 pump. Capacity 20 Lt./min...

434.24€ Ex Tax: 350.20€

Bi-component glue for sticking on surface Breons 1kg

Bi-component gluefor sticking on surface (yield about 1 sqm.)..

45.09€ Ex Tax: 36.36€

Bi-thermostat for Sigmar and Quick Boilers

BI-Thermostatmonophase heating element for Quick and Sigmar water heater 220/110 V..

42.98€ Ex Tax: 34.66€

Bidet Kit for hot and cold water

Chromed Brass cool/warm or only cool water bidet kit for toilets. Fits any toilet seat...

186.27€ Ex Tax: 150.22€

Bidet mixer faucet H136mm

Bidet mixer faucet...

115.24€ Ex Tax: 92.94€

big battery box 455x205x240h mm

Battery boxin plastic for high capacity batteries.Inner dims. 490x240x240h mm...

44.34€ Ex Tax: 35.76€

Big diameter propeller shaft collar anode 100 mm

Big diameter propeller shaft collar anodes...

190.93€ Ex Tax: 153.97€

Bilge blower Attwood for engine rooms 24V D100

Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...

38.19€ Ex Tax: 30.79€

Bilge blower Attwood for engine rooms 12V D100

Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...

36.95€ Ex Tax: 29.80€

Bilge blower Attwood for engine rooms 12V D75

Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...

31.10€ Ex Tax: 25.08€

Bilge blower Attwood for engine rooms TURBO3000 12V

Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...

36.95€ Ex Tax: 29.80€

Bilge blower Attwood for engine rooms TURBO4000 12V

Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...

40.65€ Ex Tax: 32.78€

Bilge blower Attwood for engine rooms TURBO4000 24V

Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...

78.94€ Ex Tax: 63.66€

Bilge gas extractor with JOHNSON 12V 103/110 base

High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

171.31€ Ex Tax: 138.16€

Bilge gas extractor with JOHNSON 12V 103/110 flange

High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

147.95€ Ex Tax: 119.32€

Bilge gas extractor with JOHNSON 12V 103/150 base

High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

213.84€ Ex Tax: 172.45€

Bilge gas extractor with JOHNSON 12V 103/150 flange

High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

185.09€ Ex Tax: 149.27€

Bilge gas extractor with JOHNSON 12V 72/75 flange

High quality continuous duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flange mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

63.01€ Ex Tax: 50.82€

Bilge gas extractor with JOHNSON 24V 103/110 base

High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

173.23€ Ex Tax: 139.70€

Bilge gas extractor with JOHNSON 24V 103/110 flange

High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

147.95€ Ex Tax: 119.32€

Bilge gas extractor with JOHNSON 24V 103/150 base

High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

213.84€ Ex Tax: 172.45€

Bilge gas extractor with JOHNSON 24V 103/150 base

High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

274.94€ Ex Tax: 221.72€

Bilge gas extractor with JOHNSON 24V 103/150 flange

High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

185.09€ Ex Tax: 149.27€

Bilge gas extractor with JOHNSON 24V 103/150 flange

High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

239.00€ Ex Tax: 192.74€

Bilge gas extractor with JOHNSON 24V 72/75 flange

High quality continuous duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flange mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...

59.30€ Ex Tax: 47.82€

Bilge pump IP68 switch (On) -off-On 12V / 24V - 20A / 10A

Nitrile gasket IP68 Waterproof 12/24V (20/10A) rocker switches. With laser etched actuator, does not need sticker labels and does not wear. The symbol is always lighted on (red LED), while the label text lights on (white LED) when the switch is activated...

15.79€ Ex Tax: 12.73€

Bilge pump Sahara S1100 12v

Attwood Sahara automatic bilge pump with 3 YEARS WARRANTY. Activates automatically when water is detected in the bilge. Quick opening filter base for easy cleaning...

102.77€ Ex Tax: 82.88€

bilge pump switch with floating lever universal power supply 6-12-24-32 v

Bilge pump switch with floating lever. Universal power supply 6-12-24-32 V...

24.50€ Ex Tax: 19.76€

bilge strainer ø mm.16

Brass bilge strainer with gauze. 97x55 mm.Hose connector Ø 16 mm...

10.84€ Ex Tax: 8.74€