-
Your shopping cart is empty!
Stainless Steel Helmsmann's wheels with Teak grip.19(>17) mm (3/4") Hub with 5 mm wide groove...
423.77€ Ex Tax: 341.75€
Stainless Steel frame Helmsmann's wheels. 19(>17) mm (3/4") Hub with 5 mm wide groove...
306.39€ Ex Tax: 247.09€
Chromed Brass body wire seals with watertight rubber through-deck seal. It allows to run wires through bulkheads and decks...
6.68€ Ex Tax: 5.38€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc.4809212 inner disc diameter: 127 mm...
237.20€ Ex Tax: 191.29€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc.4809212 inner disc diameter: 127 mm...
373.07€ Ex Tax: 300.86€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
410.62€ Ex Tax: 331.15€
Damper plates for medium and large engine gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
473.22€ Ex Tax: 381.63€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
592.27€ Ex Tax: 477.64€
Polyurethane closed cell foam filled Polyetilene mooring buoy. Stainless Steel through rod and swivel connections...
222.05€ Ex Tax: 179.07€
Polyurethane closed cell foam filled Polyetilene mooring buoy. Stainless Steel through rod and swivel connections...
168.02€ Ex Tax: 135.50€
Galvanized Steel Danforth Achor. Weight Kg.20. Overall Dimensions Mm A.720 B.650 C.400..
125.98€ Ex Tax: 101.60€
Galvanized Steel Danforth Achor. Weight Kg.25. Overall Dimensions Mm A.750 B.680 C.440..
159.57€ Ex Tax: 128.69€
Galvanized Steel Danforth Achor. Weight Kg.4. Overall Dimensions Mm A.510 B.410 C.260..
22.68€ Ex Tax: 18.29€
Galvanized Steel Danforth Achor. Weight Kg.6. Overall Dimensions Mm A.570 B.440 C.300..
34.43€ Ex Tax: 27.77€
Galvanized Steel Danforth Achor. Weight Kg.8. Overall Dimensions Mm A.630 B.470 C.340..
50.39€ Ex Tax: 40.64€
Danfoss electronic control unit allowsyou to power refrigerators INDEL 12/24V...
29.96€ Ex Tax: 24.17€
Fork for gas spring in stainless steel. Size mm. 54x25x29..
11.09€ Ex Tax: 8.94€
Polished Stainless Steel on deck mount set of swiveling davits. Sold in pairs. The set includes base sockets, lines, pulleys, bollards, blocks and shackles...
585.10€ Ex Tax: 471.85€
Polished Stainless Steel on deck mount set of swiveling davits. Sold in pairs. The set includes base sockets, lines, pulleys, bollards, blocks and shackles...
601.92€ Ex Tax: 485.42€
Stainless steel hub cap for classic wheelart. 4345058/635/735/640/740/845/855..
15.12€ Ex Tax: 12.19€
Fender filled in soft polyurethane for protecting the stern of sailboats, ensuresmaximum shock absorption. It adapts to any kind of stern. It adapts to every type of stern from 75° a 90°. Dim. mm. 660x280x240...
158.42€ Ex Tax: 127.76€
Polyethylene rectangular or shaped sewage and waste tanks. Complete with inspection hatch with cap and dead female threaded ports for 4 x 1/2" and 4 x 1"1/4 fittings...
274.11€ Ex Tax: 221.06€
Discharge to the sea with PVC hose connection, outside frame in AISI316 stainless steel...
11.11€ Ex Tax: 8.96€
Discharge to the sea with PVC hose connection, outside frame in AISI316 stainless steel...
11.21€ Ex Tax: 9.04€
Discharge to the sea with PVC hose connection, outside frame in AISI316 stainless steel...
11.28€ Ex Tax: 9.10€
High strength resin Ball Bearing Mini Snatch Block D=32 mm. It can be fastened both with a line or with a shackle. The Snap Ring is a line loop with an easy locking system to avoid accidental opening...
38.87€ Ex Tax: 31.35€
The cheekplate revolves around the sheave axle allowing the block to open; a safety ball prevent the block from opening and an adjustable screw allows to set the ball on locked position. There is a becket for the “hanging line”. Material: sheave with composite fibre main bearing and double side ball bearing. Hard anodized and teflon coated aluminium cheekplates with side rubber protections (yellow rubber on the revolving cheekplate)...
220.73€ Ex Tax: 178.01€
Specific detergent for descaling surfaces in contact with salt water, specially from keels and stern drives...
13.42€ Ex Tax: 10.82€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
390.51€ Ex Tax: 314.93€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Corrosion, electrolysis and fuel resistant bilge pumps.Of rugged construction, they produce high capacityoutput with the convenience of many mounting positions(see drawings). Hose diameter Ø mm. 38. Maximum lift mt. 3. Spare diaphragm art. p16217..
124.01€ Ex Tax: 100.01€
Diesel filter dim.Ø ext.mm.96 Seal Ø mm. 72 height mm.120 step M 20 X 1.5, equipped with drain..
33.26€ Ex Tax: 26.82€
Different thickness angled Plastic transom pads. To balance perfectly the engine...
11.26€ Ex Tax: 9.08€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
3.87€ Ex Tax: 3.12€
Stainless Steel DIN 963 A2 metric slotted head machine screws...
15.68€ Ex Tax: 12.65€
Stainless Steel DIN 963 A2 metric slotted head machine screws...
25.83€ Ex Tax: 20.83€
Stainless Steel DIN 963 A4 metric slotted head machine screw...
18.32€ Ex Tax: 14.77€
Disassembling Anodized Aluminum kayak paddle with reinforced Plastic blades...
57.46€ Ex Tax: 46.34€
Diving Knife With Sheath. Coloured Handle. Stainless Steel Blade, Total Length Mm.190, Blade Length Mm.90..
24.44€ Ex Tax: 19.71€
Diving Knife With Sheath And Hammer, Coloured Handle, Stainless Steel Blade, Total Length Mm.310, Blade Length Mm.185..
65.99€ Ex Tax: 53.22€
Diving Knifewith Sheath, Coloured Handle, Stainless Steel Blade, Total Length Mm.270, Blade Length Mm.140..
45.45€ Ex Tax: 36.65€
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 45/55 Tonnes, Tbreaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
1,000.52€ Ex Tax: 806.87€
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 70/90 Tonnes,breaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
1,111.69€ Ex Tax: 896.52€