-
Your shopping cart is empty!
Windex wind indicator mounted on hard stone, very sensitive and stable, it indicates with maximum precision the apparent wind direction. Sensitive to a wind of only 0.1 m / s, tested in the wind tunnel up to 140 km / h. Complete with reflective indicators visible from the bottom adjustable on the bowline angle...
37.67€ Ex Tax: 30.38€
Vented loop for toilet mounting below the waterline...
23.84€ Ex Tax: 19.23€
RULE electric pumps suitable for ventilation and water recirculation in fish and bait tanks. The input and output can be rotated 360 degrees allowing several mounting options. Capacity 3028 lt./h, for tanks up to132 lt. Power supply 12V 2,8A, fuse 5 Amp. Thread 3/4, hose conn. Ø mm. 19. Threaded sea suction tube for mounting di- rectly on the valve input with inside outlet to connect to a sea gate...
82.53€ Ex Tax: 66.56€
RULE electric pumps suitable for ventilation and water recirculation in fish and bait tanks. The input and output can be rotated 360 degrees allowing several mounting options. Capacity 3028 lt./h, for tanks up to132 lt. Power supply 12V 2,8A, fuse 5 Amp. Thread 3/4, hose conn. Ø mm. 19. Tube angled entrance with tran- som sloping outlet...
89.63€ Ex Tax: 72.28€
Portable immersion pump with three suction cups for fixing in bait and fish preservation tanks. Flow rate 950 l / h. 12V-2A power supply. Dim. Mm. 130xØ75x300h. The aeration tube is about mm.230 long...
31.24€ Ex Tax: 25.19€
Weather, shock, solvent and UV resistant, almost indistructible Saralon Polypropylene resin frame ventilation hatch. Shock and scratch resistant tempered glass lens for perfect clarity. Trim ring included. 28 mm on deck height. CE approval areas: II...
319.15€ Ex Tax: 257.38€
Bow guard protection fender for sailboats when anchor is weighed or when bow berthing occurs. Sturdy PVC body for optimal shock absorbtion (it doesn't deflate, does not contain air). Four line eyelets for a safe bow fix...
43.11€ Ex Tax: 34.77€
Bow guard protection fender for sailboats when anchor is weighed or when bow berthing occurs. Sturdy PVC body for optimal shock absorbtion (it doesn't deflate, does not contain air). Four line eyelets for a safe bow fix...
43.11€ Ex Tax: 34.77€
Block single stand up yacht club, Ø Pulley mm. 50 Ø Shackle mm. 6 ØRope mm. 10 max Max work load kg. 750 Break load 1500..
105.45€ Ex Tax: 85.04€
Block single stand up yacht club, Ø Pulley mm. 60 Ø Shackle mm. 8 ØRope mm. 12 (14) max Max work load kg. 1250 Break load 2500..
170.24€ Ex Tax: 137.29€
Block single stand up yacht club, Ø Pulley mm. 80 Ø Shackle mm. 10 ØRope mm. 16 max Max work load kg. 1800 Break load 3600..
255.33€ Ex Tax: 205.91€
HS Cheek block with ball bearing sheave. Sheave axis-base distance: 25 mm. Stainless Steel body. Sheet <8 mm / 300 Kg (bl)...
10.19€ Ex Tax: 8.22€
Bilge strainerin plastic with non-return valvefor hose Ø mm.25/35...
21.25€ Ex Tax: 17.14€
Vertical water/fuel level senders with VDO type 5 hole flange. 316 Stainless Steel body. Impedance 10 - 180 Ohm (empty-full).Suitable for VDO - YAZAKI - FARIA EUROPE instruments...
66.01€ Ex Tax: 53.23€
Vertical water/fuel level senders with VDO type 5 hole flange. 316 Stainless Steel body. Impedance 10 - 180 Ohm (empty-full).Suitable for VDO - YAZAKI - FARIA EUROPE instruments...
89.37€ Ex Tax: 72.07€
Mk10 Solas Stole Lifejacket - M.e.d. - Iso 12402-3 Foldable To Reduce Storage Space. Built With Floating Material, Closedcell, With A Whistle, Reflective Bands, Two Quick Release Buckles System,buddy System And Rescue Loop...
46.95€ Ex Tax: 37.86€
Self-righting capacity lifejacket 100N, keeps the childs head well out of the water. Buoyancy is 30% higher than the minimum required. Large roll-around collar with increased buoyancy providing added comfort and improved head support. With retro-reflecting tapes, zip, adjustable waist belt with plastic clip, hem tightening drawstring for snug fit, crotch strap and Grab handle. CE EN ISO12402-4..
33.08€ Ex Tax: 26.67€
Self-righting capacity lifejacket 100N, keeps the childs head well out of the water. Buoyancy is 30% higher than the minimum required. Large roll-around collar with increased buoyancy providing added comfort and improved head support. With retro-reflecting tapes, zip, adjustable waist belt with plastic clip, hem tightening drawstring for snug fit, crotch strap and Grab handle. CE EN ISO12402-4..
36.14€ Ex Tax: 29.14€
Vetral noise/thermo absorber coating with Lead insert. Isolates from noise (20dB) and heat. Aluminized fibreglass coating resistant to high temperatures. R.I.Na. CDS/467-95/TAO certified. Self extinguishing according to UL94HF1 rules...
363.56€ Ex Tax: 293.20€
AGM (Absorbed Glass Mat) technology Vetus batteries. Sealed, do not need maintenance. Very sturdy, if damaged they don not leak liquids and continue to work thanks to fiberglass separators inserted between plates. Specially designed for cyclical use...
813.20€ Ex Tax: 655.81€
Air vents for under the waterline exhaust systems. With adjustable and detachable valve/pipe-to-hose for easy maintenance...
133.58€ Ex Tax: 107.72€
Vetus battery charger/maintainer suitable for all 12V up to 100Ah Lead-Acid batteries. With 220V voltage input, IP65 protection and 1,80 meters AC/DC cables. When connected to the battery it recuperates, charges and maintains it in five steps: - Desulfation: recuperates a discharged battery - Boost: charges the battery up to 75% capacity - Equalization: charges the battery according to charging status - Top-off: fully charges the battery without overcharging - Float: maintains the ba..
93.62€ Ex Tax: 75.50€
Vetus Bullflex flexible coupling for an excellent alignment of the propeller shaft due to a special centering ring. Max HP: max engine power at 3000 RPM (1500 shaft RPM) with reduction 2:1...
1,580.19€ Ex Tax: 1,274.35€
Stainless Steel body standard cabine ventilator or with CE AII class certification. Can be completed with 12 or 24V electric extractor. CE model can be closed where necessary, with bug screen included...
80.98€ Ex Tax: 65.31€
Low profile Silicon Rubber cowl ventilators with flange and ring made of reinforced Plastic. They can revolve and are removable. Resistant to temperature, UV rays, dirt and discolouration. The optional Dorade Box endowed with closing handle and bug screen drains off any water entering the ventilator...
71.16€ Ex Tax: 57.39€
Low profile Silicon Rubber cowl ventilators with flange and ring made of reinforced Plastic. They can revolve and are removable. Resistant to temperature, UV rays, dirt and discolouration. The optional Dorade Box endowed with closing handle and bug screen drains off any water entering the ventilator...
81.75€ Ex Tax: 65.92€
Plastic mufflerIt reduces to minimum engine exhaust noise. It collectswater after engine switched off...
204.25€ Ex Tax: 164.72€
Plastic mufflerIt reduces to minimum engine exhaust noise. It collectswater after engine switched off...
204.25€ Ex Tax: 164.72€
Anodized Aluminium frame Vetus flush deck hatch built in compliance with class AII CE rules. Completely recessed into the deck, there are no protruding parts. 10mm thickness smoke colour Acrilic lid...
816.08€ Ex Tax: 658.13€
Polypropylene body seawater Vetus FTR1320 strainer with adjustable Stainless Steel mounting brackets. For pumps and engine cooling...
441.01€ Ex Tax: 355.65€
Polypropylene body seawater Vetus FTR1320 strainer with adjustable Stainless Steel mounting brackets. For pumps and engine cooling...
533.62€ Ex Tax: 430.34€
Polypropylene body seawater Vetus FTR1320 strainer with adjustable Stainless Steel mounting brackets. For pumps and engine cooling...
546.49€ Ex Tax: 440.72€
Tee 1/ 4 gas fitting, Nickel plated brass for art. 4344500/501 or for copper tube Ø mm. 10..
42.50€ Ex Tax: 34.27€
Nickel plated brass fitting T 3/8 gas, copper tube Ø mm. 12..
44.34€ Ex Tax: 35.76€
Anodized Aluminium frame Vetus hatches with 12mm thickness smoky Acrilic lens. Fitted with friction type hinges allowing it to stay open in any position up to 180°. On deck height: 50mm. CE class AII certified...
351.06€ Ex Tax: 283.11€
Anodized Aluminium frame Vetus hatches with 12mm thickness smoky Acrilic lens. Fitted with friction type hinges allowing it to stay open in any position up to 180°. On deck height: 50mm. CE class AII certified...
399.20€ Ex Tax: 321.93€
Anodized Aluminium frame Vetus hatches with 12mm thickness smoky Acrilic lens. Fitted with friction type hinges allowing it to stay open in any position up to 180°. On deck height: 50mm. CE class AII certified...
566.46€ Ex Tax: 456.82€
Anodized Aluminium frame Vetus hatches with 12mm thickness smoky Acrilic lens. Fitted with friction type hinges allowing it to stay open in any position up to 180°. On deck height: 50mm. CE class AII certified...
419.41€ Ex Tax: 338.23€
Anodized Aluminium frame Vetus hatches with 12mm thickness smoky Acrilic lens. Fitted with friction type hinges allowing it to stay open in any position up to 180°. On deck height: 50mm. CE class AII certified...
681.67€ Ex Tax: 549.73€
Anodized Aluminium frame Vetus hatches with 12mm thickness smoky Acrilic lens. Fitted with friction type hinges allowing it to stay open in any position up to 180°. On deck height: 50mm. CE class AII certified...
848.93€ Ex Tax: 684.62€
Horizontal two chamber waterlock/muffler with rotatable components and hose connections. Simple and time-saving installation. Capacity: 40/45/50 3 liters - 60/75/90 10 liters...
291.23€ Ex Tax: 234.86€
Horizontal two chamber waterlock/muffler with rotatable components and hose connections. Simple and time-saving installation. Capacity: 40/45/50 3 liters - 60/75/90 10 liters...
291.23€ Ex Tax: 234.86€
Horizontal two chamber waterlock/muffler with rotatable components and hose connections. Simple and time-saving installation. Capacity: 40/45/50 3 liters - 60/75/90 10 liters...
291.23€ Ex Tax: 234.86€
Horizontal two chamber waterlock/muffler with rotatable components and hose connections. Simple and time-saving installation. Capacity: 40/45/50 3 liters - 60/75/90 10 liters...
403.11€ Ex Tax: 325.09€
Horizontal two chamber waterlock/muffler with rotatable components and hose connections. Simple and time-saving installation. Capacity: 40/45/50 3 liters - 60/75/90 10 liters...
403.11€ Ex Tax: 325.09€
Nylon hose Ø mm. 6x8. For steering MT 30, roll mt. 15...
83.15€ Ex Tax: 67.05€