-
Your shopping cart is empty!
Your shopping cart is empty!
Portable automated equipment for filling and bleeding of hydraulic systems contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. Possible to connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of:- unit equipped with a safety valve, switch, 5 liter tank and electric motor 12V 8A.- electric cable mt. 4 full clips for connecting to the battery...
1,222.86€ Ex Tax: 986.18€
Bestseller
BAY15D LED double contact bulb with non parallel pins. Covered by a waterproof clear siliconic rubber compound. Reduced consumption (3W) for a performance like a 25W light. 3000 K° warm white light. For navigation lights...
16.85€ Ex Tax: 13.59€
Two Poles Bulb 15 W- svan- connection BA15d for art. 4040707/8/10/12..
7.10€ Ex Tax: 5.73€
Two Poles Bulb 15 W- svan- connection BA15d for art. 4040707/8/10/12..
5.33€ Ex Tax: 4.30€
Double contact BAY 15D bayonet base vertical bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
12.32€ Ex Tax: 9.93€
Double contact BAY 15D bayonet base vertical bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
12.32€ Ex Tax: 9.93€
Bullseyes For on-deck screw mounting. All feature a strong,moulded black plastic eye...
1.23€ Ex Tax: 0.99€
Bullseyes for through-deck or on-deck screw mounting. Allfeature a strong, moulded plastic eye, reinforcedwith a stainless steel bar...
12.32€ Ex Tax: 9.93€
Bullseyes For on-deck screw mounting. All feature a strong,moulded black plastic eye...
1.85€ Ex Tax: 1.49€
Big guardfender for docks and marinas protection. Pressure regulation valve included...
82.36€ Ex Tax: 66.42€
E.V.A. (Ethylene, Vinyl Acetate, Copolymer) fenders New floating, closed cells material. Protection profiles for jetties, docks, garages, trailers, etc. Products with high quality synthetic rubber compounds. Very high resistance to impact, cutting,abrasion and seawater. Does not mark boat hull. Resistant to UV rays, oil, fuel and chemical products. Particularly suitable as fender.Dim. length. 1000 x 300 x 145 h...
166.29€ Ex Tax: 134.11€
Fender conceived for docks and landing or floating stages made of concrete. It is suitable to protect the most treacherous areas of the harbor, such as the corners of canal entrances, of dock-heads, quays and slipways entrances.E.V.A. (Ethylene, Vinyl Acetate, Copolymer) fenders new floating, closed cells high quality synthetic rubber compounds. Very high resistance to impact, cutting, abrasion and seawater. Does not mark boat hull. Resistant to UV rays, oil, fuel and chemical products. Particul..
184.77€ Ex Tax: 149.01€
Modular specific profile for applications on fingers in E.V.A. (Ethylene, Vinyl Acetate, Copolymer) a new floating, closed cells material. Protection profiles for jetties, docks, garages, trailers, etc. Its small size guarantees it only takes up the minimal amount of space, allowing the marina to minimize the distance among the fingers and the boater to moor in complete safety even without boat fenders. The flexible profile is suitable for every surface, linear or curved, and does not need speci..
43.11€ Ex Tax: 34.77€
Modular profile particularly suitable for fingers and floating docks (aluminum, iron and wood) in E.V.A. (Ethylene, Vinyl Acetate, Copolymer) new floating, closed cells material. Protection profiles for jetties, docks, garages, trailers, etc. Solid yet flexible, with the possibility of bending. Its flexibility makes it suitable for protecting the external part of the pile guides, which often constitutes an encumbrance for the mooring. Its resilience guarantees maximum protection even to large bo..
55.43€ Ex Tax: 44.70€
Inflatable buoy for mooring or signaling with through hole, thick walls, reinforced ends, orange color.Mod. CC2, Ø Ext. mm. 385, Heig. mm. 430, Ø Int hole mm. 48, Weight kg. 2,6...
77.46€ Ex Tax: 62.47€
Roca windshield wipers for large boats. Watertight motor with max torque up to 12Nm. Waterproof housing made of UV-stabilized thermo plastic. 2 speed: Slow 30 sweep/minute and Fast 45 sweep/minute. Adjustable wiping angle 45°- 60°- 80°- 110° (Standard adjustment 110°). Changeable self-parking right or left position (Standard position right self-parking). Arm/blade dimensions up to 22” x 22” / 550mm x 550mm. Stainless Steel mounting bracket and fasteners. To be completed with wiper arm ..
95.54€ Ex Tax: 77.05€
Roca windshield wipers for large boats. Watertight motor with max torque up to 12Nm. Waterproof housing made of UV-stabilized thermo plastic. 2 speed: Slow 30 sweep/minute and Fast 45 sweep/minute. Adjustable wiping angle 45°- 60°- 80°- 110° (Standard adjustment 110°). Changeable self-parking right or left position (Standard position right self-parking). Arm/blade dimensions up to 22” x 22” / 550mm x 550mm. Stainless Steel mounting bracket and fasteners. To be completed with wiper arm ..
35.72€ Ex Tax: 28.81€
AISI 316 fairlead cable leads with gasket. Dim. mm.: A=32, B=62, C=28Ø cable from 12 a 20 mm..
29.52€ Ex Tax: 23.81€
AISI 316 fairlead cable leads with gasket. Dim. mm.: A=22, B=49, C=21Ø cable from 4 a 11 mm...
20.83€ Ex Tax: 16.79€
Nylon Lacing button. Dim. hole Ø mm. 4. Pack of 100 pieces..
0.67€ Ex Tax: 0.54€
BW-Max M4 freshwater pump for sinks and showers, from 2 to 4 outlets...
144.23€ Ex Tax: 116.32€
BW-Max M4 freshwater pump for sinks and showers, from 2 to 4 outlets...
144.23€ Ex Tax: 116.32€
Nautic Boiler water heater designed for marine use. Works at shoreside or using a generator at 1200W-220V electric resistance or, thanks to a special enveloping type heat exchanger, with engine's cooling circuit heat. Maintains water drinkable. Anode against electrolysys effect included. 316 Stainless Steel tank and insulation casing. 3 Years warranty. To be completed with mixing valve kit...
1,379.59€ Ex Tax: 1,112.58€
PVC fender profile for boxed couplings, needs base support TR.55 in semi-rigid duralene, roll mt. 25. Channel support art. 6566056, Terminal art. 6566155B / 6566155N, Cople 6566058B / 6566058...
20.94€ Ex Tax: 16.89€
PVC fender profile for boxed couplings, needs base support TR.55 in semi-rigid duralene, roll mt. 25. Channel support art. 6566056, Terminal art. 6566155B / 6566155N, Cople 6566058B / 6566058...
20.94€ Ex Tax: 16.89€
Cabinet catch for drawers and cabinets. Bronze base and socket...
5.60€ Ex Tax: 4.52€
Wire Rope Aisi 316, In Spools Mt. 100. Ø 10 Mm. 19 Yarns Breaking Charge 7870 Kg...
26.07€ Ex Tax: 21.02€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 336 Kg...
69.77€ Ex Tax: 56.27€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 525 Kg...
102.03€ Ex Tax: 82.28€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 1340 Kg...
247.57€ Ex Tax: 199.65€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 2910 Kg...
522.14€ Ex Tax: 421.08€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 206 Kg...
702.19€ Ex Tax: 566.28€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 5040 Kg...
900.24€ Ex Tax: 726.00€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 756 Kg...
144.04€ Ex Tax: 116.16€
Wire Rope Aisi 316, In Spools Mt. 100. Breaking Load 2100 Kg...
378.10€ Ex Tax: 304.92€
Calibrated chain and top quality 3-strand Polyester rope spliced for windlasses. Perfect connection system between rope and chain with slimmer and more tapered splice preventing the jamming on the gypsy...
404.59€ Ex Tax: 326.28€
Calibrated chain and top quality 3-strand Polyester rope spliced for windlasses. Perfect connection system between rope and chain with slimmer and more tapered splice preventing the jamming on the gypsy...
426.22€ Ex Tax: 343.72€
New
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
840.00€ Ex Tax: 677.42€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
1,445.91€ Ex Tax: 1,166.05€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
874.62€ Ex Tax: 705.34€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
340.42€ Ex Tax: 274.53€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
513.14€ Ex Tax: 413.82€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
515.64€ Ex Tax: 415.84€
Calibrated chain in stainless steel AISI 316 for windlasses. DIN 766. Dim. mm. A.18,5 B.20. Pack 50 mt...
1,010.63€ Ex Tax: 815.02€
Calibrated chain in stainless steel AISI 316 for windlasses. DIN 766. Dim. mm. A.24 B.26. Pack 50 mt...
1,627.11€ Ex Tax: 1,312.18€
Aisi 316 Stainless Steel Bow Shackles. Size: Ø 19 Mm. A 66 Mm. B 38 Mm. C 109 Mm. D 66 Mm...
25.22€ Ex Tax: 20.34€
Sea type padlock standard shackle. Solid nickel-plated brass body. Stainless steel springs and shackle...
16.92€ Ex Tax: 13.65€
