-
Your shopping cart is empty!
Plastic spare blades for oars and paddles...
11.09€ Ex Tax: 8.94€
Plastic spare blades for oars and paddles...
11.09€ Ex Tax: 8.94€
Chromed Brass body wire seals with watertight rubber through-deck seal. It allows to run wires through bulkheads and decks...
6.68€ Ex Tax: 5.38€
Chromed Brass body wire seals with watertight rubber through-deck seal. It allows to run wires through bulkheads and decks...
6.68€ Ex Tax: 5.38€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc.4809212 inner disc diameter: 127 mm...
237.20€ Ex Tax: 191.29€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc.4809212 inner disc diameter: 127 mm...
373.07€ Ex Tax: 300.86€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
410.62€ Ex Tax: 331.15€
Damper plates for medium and large engine gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
473.22€ Ex Tax: 381.63€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
592.27€ Ex Tax: 477.64€
Galvanized Steel Danforth Achor. Weight Kg.20. Overall Dimensions Mm A.720 B.650 C.400..
125.98€ Ex Tax: 101.60€
Galvanized Steel Danforth Achor. Weight Kg.25. Overall Dimensions Mm A.750 B.680 C.440..
159.57€ Ex Tax: 128.69€
Galvanized Steel Danforth Achor. Weight Kg.4. Overall Dimensions Mm A.510 B.410 C.260..
22.68€ Ex Tax: 18.29€
Galvanized Steel Danforth Achor. Weight Kg.6. Overall Dimensions Mm A.570 B.440 C.300..
34.43€ Ex Tax: 27.77€
Galvanized Steel Danforth Achor. Weight Kg.8. Overall Dimensions Mm A.630 B.470 C.340..
50.39€ Ex Tax: 40.64€
Danfoss electronic control unit allowsyou to power refrigerators INDEL 12/24V...
29.96€ Ex Tax: 24.17€
Red painted end wooden handle. Pure professional dark bristles with 15 mm thickness and 90% fullness...
7.91€ Ex Tax: 6.38€
Fork for gas spring in stainless steel. Size mm. 54x25x29..
11.09€ Ex Tax: 8.94€
Handle made of heat treated, drawn anodized aluminum for extra strength. Stainless Steel locator button locks handle in position. Comfortable hand grip...
61.59€ Ex Tax: 49.67€
Descaler, desalinizer and deoxidizer detergent. Specific for hull rust stains removal, Stainless Steel and Chromed surfaces polishing. Excellent descaler for engines cooling circuit...
20.25€ Ex Tax: 16.33€
High strength resin Ball Bearing Mini Snatch Block D=32 mm. It can be fastened both with a line or with a shackle. The Snap Ring is a line loop with an easy locking system to avoid accidental opening...
38.87€ Ex Tax: 31.35€
The cheekplate revolves around the sheave axle allowing the block to open; a safety ball prevent the block from opening and an adjustable screw allows to set the ball on locked position. There is a becket for the “hanging line”. Material: sheave with composite fibre main bearing and double side ball bearing. Hard anodized and teflon coated aluminium cheekplates with side rubber protections (yellow rubber on the revolving cheekplate)...
220.73€ Ex Tax: 178.01€
Specific detergent for descaling surfaces in contact with salt water, specially from keels and stern drives...
13.42€ Ex Tax: 10.82€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
390.51€ Ex Tax: 314.93€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Corrosion, electrolysis and fuel resistant bilge pumps.Of rugged construction, they produce high capacityoutput with the convenience of many mounting positions(see drawings). Hose diameter Ø mm. 38. Maximum lift mt. 3. Spare diaphragm art. p16217..
124.01€ Ex Tax: 100.01€
Diaphragm standard manual bilge pump...
57.69€ Ex Tax: 46.53€
Diesel and gasoline engine ignition switch with rubber cap. Brass body, diameter 45 mm. 4 Terminals - 4 Positions...
32.62€ Ex Tax: 26.30€
Rubber hose for diesel fuel and unleaded gasoline on pleasure boats up to 24meters. Regulations SAEJ 1527:2004 ISO 7840:2004 A1-USCGA1R1-EC. Approved CE 0474 - R.I.Na. LLOYDs REGISTER. Operating temperature - 30 ° C + 100 ° C. Operating pressure of 10 bar...
100.78€ Ex Tax: 81.28€
Diesel filter dim.Ø ext.mm.96 Seal Ø mm. 72 height mm.120 step M 20 X 1.5, equipped with drain..
33.26€ Ex Tax: 26.82€
AIFO-LOMBARDINI diesel filter (for motors a-M20-M40 8040-8060-TURBO) FORD (engine 54HP) N (for engines 6.660 4.440 E-and-REF. or. 51.12503-0018) PERKINS (for engines BEFORE M25-M50-M60-M80T-4CL (2, 0L))..
12.59€ Ex Tax: 10.15€
Disassembling Anodized Aluminum kayak paddle with reinforced Plastic blades...
57.46€ Ex Tax: 46.34€
Diving knife with line cutter and shackle opener. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
32.81€ Ex Tax: 26.46€
Diving Knife With Sheath And Hammer, Coloured Handle, Stainless Steel Blade, Total Length Mm.310, Blade Length Mm.185..
65.99€ Ex Tax: 53.22€
Diving Knifewith Sheath, Coloured Handle, Stainless Steel Blade, Total Length Mm.270, Blade Length Mm.140..
45.45€ Ex Tax: 36.65€
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 45/55 Tonnes, Tbreaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
1,000.52€ Ex Tax: 806.87€
Dockwheel protection PVC guard for docks. Support not included. It allows smooth passing of boats during mooring...
28.20€ Ex Tax: 22.74€
Compact gas cooker with 28 Lt oven and 2 burners. Complete with panholders, safety door lock and safe ignition system. Very easy flame and temperature control. Power: oven 1100W - burners 1800/2200W. H = Height W = Width L = Length..
1,362.94€ Ex Tax: 1,099.15€
Novibra panel latch for doors, hatches, drawers, lockers and similar type applications. Quick and easy installation, it helps to eliminate noise caused by engine vibration. Weatherproof face, PC/ABS corrosion UV resistant body.Chromed cup, chromed handle. Southco type 2...
33.87€ Ex Tax: 27.32€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel swiveling top and shackle. The high quality materials guarantee high work loads and extra lightness...
341.31€ Ex Tax: 275.25€
Ball bearing HS blocks for sheets up to 6 mm. Stainless Steel ball bearings and cheeks, plastic sheave. Sheave diameter 19 mm. Breaking load 450 Kg...
43.88€ Ex Tax: 35.39€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
114.78€ Ex Tax: 92.56€