Polished Stainless Steel on deck mount set of swiveling davits. Sold in pairs. The set includes base sockets, lines, pulleys, bollards, blocks and shackles...
Handle made of heat treated, drawn anodized aluminum for extra strength. Stainless Steel locator button locks handle in position. Comfortable hand grip...
Blade Fender filled in soft polyurethane, ensures maximum shock absorption. Idealfor protecting the bow of the cruiser and racer sailboats. Thanks to itsshape can also be left during the navigation. It adapts to any type of bowup to 7 cm. wide. Supplied with 2 flat braids already mounted. Whitecolour. Dim. cm. 104x16x12. Weight 2,7 kg...
A traditional fender will tilt away from the hull and may eventually slip above or below, whereas the articulated RIB fender follows the curves of the hull and remains in the right position to protect the boatefficiently. Comes with 1 m Ø 5 mm rope...
High strength resin Ball Bearing Mini Snatch Block D=32 mm. It can be fastened both with a line or with a shackle. The Snap Ring is a line loop with an easy locking system to avoid accidental opening...
The cheekplate revolves around the sheave axle allowing the block to open; a safety ball prevent the block from opening and an adjustable screw allows to set the ball on locked position. There is a becket for the “hanging line”. Material: sheave with composite fibre main bearing and double side ball bearing. Hard anodized and teflon coated aluminium cheekplates with side rubber protections (yellow rubber on the revolving cheekplate)...
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
Disassembling 3 Arches sun-water bimini top. 316 Stainless Steel frame, 100% Polyester PVC coated fabric.
With the optional pole supports it can be mounted as a Roll-Bar...
Disassembling 3 Arches sun-water bimini top. 316 Stainless Steel frame, 100% Polyester PVC coated fabric.
With the optional pole supports it can be mounted as a Roll-Bar...
Disassembling 3 Arches sun-water bimini top. 316 Stainless Steel frame, 100% Polyester PVC coated fabric.
With the optional pole supports it can be mounted as a Roll-Bar...
Special material pads that soak up oil and fuel but do not absorb water. They absorb 20-30 times their weight of oil or fuel and can be placed into the bilge or engine room. They represent the most effective way to clean up or avoid an oil or fuel spill...
Telescopic foldable electropolished Stainless Steel ladders.
Easy boarding for swimmers or divers with fins and heavy gear thanks to the central support and steps free on both sides...
Compact diving knife with line cutter and shackle opener hole. The Stainless Steel handle and only 4 mm reduced thickness make this knife perfect for diving. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
Diving knife with line cutter and shackle opener. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 45/55 Tonnes, Tbreaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
BC60 corner bumper, offers perfect protection for pontoons, berths and docks' corners and edges. Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
B80/90 long and slim bumper for berths, pontoons, fingers and haulage docks.
Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
B80/90 long and slim bumper for berths, pontoons, fingers and haulage docks.
Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
B60/100 large compact bumper for berths, pontoons and haulage docks.
Made of extra strong E.V.A. soft foam that recovers its original shape even if hardly bented. Weathering, oils and solvents resistant...
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
TCD Quick control panels with push-buttons or Joysticks for operating bow-thruster propellers.
Simple and intuitive user interface.
Universal 8-30 Vdc power supply.
Possibility of connecting several TCD controls in parallel.
Easy to install thanks to the 2-wire connector (optional extensions).
Automatic priority system and disablement.
Protection against reverse polarity, short circuit output, prolonged activity of motor and interruption of thruster controls wiring...
Plain bearing HS blocks for sheets up to 10 mm.
Stainless Steel cheeks and plastic sheave.
Sheave diameter 36 mm. Breaking load 850 Kg.
Swivel head is mounted on fixed blocks to make them swivel...