-
Your shopping cart is empty!
Your shopping cart is empty!
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
340.42€ Ex Tax: 274.53€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
513.14€ Ex Tax: 413.82€
High quality calibrated Hot-dip Galvanized Steel chain for windlasses. Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
515.64€ Ex Tax: 415.84€
1 Burner Stainless Steel stove with safety thermocouples...
223.43€ Ex Tax: 180.18€
Ring bolt in AISI 316 stainless steel ring bolt with nut and washers. Thread Ø mm. 10, Length 85mm...
13.87€ Ex Tax: 11.18€
Ring bolt in AISI 316 stainless steel ring bolt with nut and washers. Thread Ø mm. 10, Length 55mm...
12.21€ Ex Tax: 9.84€
Canvas bag for International Maritime Signal Flags...
67.75€ Ex Tax: 54.64€
Thin and aerodinamic design sun-water bimini top that creates more shadow than other standard biminis. With innovative fold-up closing system that avoids the bimini to be removed. 316 Stainless Steel frame, 100% Polyester PVC coated fabric. Frame and fabric to be purchased separately...
381.50€ Ex Tax: 307.66€
Indoor Boat Cover - Version with elastic Its uniqueness is the two elastic applied laterally along the entire length, to facilitate and reduce time of installation. Sold in roll. Installation instructions:1. Roll out the cloth from bow to stern keeping the boat leaving a power surplus of about 50 cm on each side.2. Apply two clamps spaced about 30 cm and cut the cloth.3. Remove the rubber bands and knot.4. Open the canvas on the boat.5. Pull the rubber band from one end and knot to hold it in tr..
193.03€ Ex Tax: 155.67€
Indoor Boat Cover - Version with elastic Its uniqueness is the two elastic applied laterally along the entire length, to facilitate and reduce time of installation. Sold in roll. Installation instructions:1. Roll out the cloth from bow to stern keeping the boat leaving a power surplus of about 50 cm on each side.2. Apply two clamps spaced about 30 cm and cut the cloth.3. Remove the rubber bands and knot.4. Open the canvas on the boat.5. Pull the rubber band from one end and knot to hold it in tr..
341.69€ Ex Tax: 275.56€
Indoor Boat Cover - Version with elastic Its uniqueness is the two elastic applied laterally along the entire length, to facilitate and reduce time of installation. Sold in roll. Installation instructions:1. Roll out the cloth from bow to stern keeping the boat leaving a power surplus of about 50 cm on each side.2. Apply two clamps spaced about 30 cm and cut the cloth.3. Remove the rubber bands and knot.4. Open the canvas on the boat.5. Pull the rubber band from one end and knot to hold it in tr..
155.56€ Ex Tax: 125.45€
Indoor Boat Cover - Version with elastic Its uniqueness is the two elastic applied laterally along the entire length, to facilitate and reduce time of installation. Sold in roll. Installation instructions:1. Roll out the cloth from bow to stern keeping the boat leaving a power surplus of about 50 cm on each side.2. Apply two clamps spaced about 30 cm and cut the cloth.3. Remove the rubber bands and knot.4. Open the canvas on the boat.5. Pull the rubber band from one end and knot to hold it in tr..
174.91€ Ex Tax: 141.06€
It Has An Edge On The Cage That Holds The Valve Body To Stay Inside The Tube. Ø 35 Mm Hole In The Fabric, Ext. 55 Mm, H Mm. 40. The Cord That Holds The Plug Is Housed Under The Cap Itself, Therefore Invisible. Pushing On The Central Button Of Red Color, The Valve Opens, Pushing The Second Time The Valve Closes...
12.25€ Ex Tax: 9.88€
Cap Horizon (by Barigo) weather instruments with satinised Stainless Steel case...
96.25€ Ex Tax: 77.62€
Cap Horizon (by Barigo) weather instruments with Polished Brass case...
90.45€ Ex Tax: 72.95€
Cap Horizon (by Barigo) weather instruments with satinised Stainless Steel case...
99.36€ Ex Tax: 80.13€
Cap Horizon (by Barigo) weather instruments with satinised Stainless Steel case...
115.39€ Ex Tax: 93.05€
Carabine in AISI 316 stainless steel. Safety screw. Size: D 6mm. L 60mm. A 9mm. E 6,5mm...
8.62€ Ex Tax: 6.95€
Carabine in AISI 316 stainless steel. Safety screw. Size: D 8mm. L 80mm. A 12mm. E 8,5mm...
9.85€ Ex Tax: 7.95€
Carabine in AISI 316 stainless steel. Safety screw. Size: D 10mm. L 100mm. A 15mm. E 11mm...
12.32€ Ex Tax: 9.93€
Carabine In Aisi 316 Stainless Steel. Safety Screw. Size: D 12mm. L 140mm. A 20mm. E 19mm...
14.78€ Ex Tax: 11.92€
Carabine in AISI 316 stainless steel. Safety screw. Size: D 5mm. L 50mm. A 8mm. E 5,5mm...
7.39€ Ex Tax: 5.96€
Original Kong Carabine In Aisi 316 Stainless Steel. Model key-lock. Size: Ø 7mm. Length 70mm. Breaking Load 180 Kg...
13.53€ Ex Tax: 10.91€
Original Kong Carabine In Aisi 316 Stainless Steel. Model key-lock. Size: Ø 10mm. Length 100mm. Breaking Load 1200 Kg...
15.55€ Ex Tax: 12.54€
Original Kong Carabine In Aisi 316 Stainless Steel. Model key-lock. Size: Ø 11mm. Length 120mm. Breaking Load 2000 Kg...
19.47€ Ex Tax: 15.70€
Original Kong Carabine In Aisi 316 Stainless Steel. Model key-lock. Size: Ø 13mm. Length 160mm. Breaking Load 2400 Kg...
27.93€ Ex Tax: 22.52€
Original kong carabine in AISI 316 stainless steel. Model Key-Lock. Size: Ø 5mm. Length 50mm. Breaking load 120 Kg...
8.36€ Ex Tax: 6.74€
Original Kong Carabine In Aisi 316 Stainless Steel. Model key-lock. Size: Ø 6mm. Length 60mm. Breaking Load 120 Kg...
9.00€ Ex Tax: 7.26€
Original Kong Carabine In Aisi 316 Stainless Steel. Model key-lock. Size: Ø 8mm. Length 80mm. Breaking Load 800 Kg...
9.61€ Ex Tax: 7.75€
Wichard 316 Forged Stainless Steel swivel eye spi snap shackle with clevis pin. Breaking load (BL) tested and guaranteed...
88.95€ Ex Tax: 71.73€
Wichard 316 Forged Stainless Steel swivel eye spi snap shackle with clevis pin. Breaking load (BL) tested and guaranteed...
136.39€ Ex Tax: 109.99€
Strong and lightweight gangway made of Carbon fiber and Polymers composite. Built in single piece without bonding, complete with pin and flush mount socket. Floating, rust-proof and UV alteration free. With anti-slip surface and elastic protective side tape to avoid scratches...
2,207.26€ Ex Tax: 1,780.05€
Carbon Steel press fittings for R2T/R7 tubing...
3.36€ Ex Tax: 2.71€
White PVC shower holder bulkhead flush mount.Outside dims. 230x150x100..
19.49€ Ex Tax: 15.71€
Cast and polished 316 Stainless Steel 60° square base...
11.86€ Ex Tax: 9.56€
Cast and polished 316 Stainless Steel 60° square base...
12.70€ Ex Tax: 10.24€
Cast and polished 316 Stainless Steel 90° square base...
11.86€ Ex Tax: 9.56€
Cast and polished 316 Stainless Steel 60° round base...
16.01€ Ex Tax: 12.91€
Caterpillar engine (10x55mm) pencil anodes...
37.54€ Ex Tax: 30.28€
Caterpillar engine (22x20mm) pencil anodes...
45.95€ Ex Tax: 37.06€
Caterpillar engine (28x55mm) pencil anodes...
89.00€ Ex Tax: 71.78€
Brass case dome lights with toggle switch and frosted glass...
37.11€ Ex Tax: 29.93€
Halogen courtesy lightin white plastic, complete with switch. Complete with bulb 10 W, 12V art.4040957. Dims. Ø mm. 66 x 90, protrudes. mm. 21.5...
21.12€ Ex Tax: 17.04€
Adjustable spotlightin aluminum, brass color, with built-in switch.Wall or ceiling. Complete with bulb art. 4040912. Dim. Ø mm.100x103..
12.33€ Ex Tax: 9.94€
Stainless steel courtesy light 6 LED, warm white light (2850-3200 ° K), IP 65 waterproof, flush mount, consumption 3.2 W, duration 50000 hours...
21.19€ Ex Tax: 17.09€
Adjustable spotlightin aluminum, chromed brass color, built-in switch. Wall mounting orceiling. Complete with bulb 12V 10W art. 4040912. Dim. Ø mm.100..
12.86€ Ex Tax: 10.37€
Handrail central brackets made in AISI 316 stainless steel...
12.32€ Ex Tax: 9.93€
Handrail central bracket made in AISI 316 stainless steel...
13.86€ Ex Tax: 11.18€
