-
Your shopping cart is empty!
Your shopping cart is empty!
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
390.51€ Ex Tax: 314.93€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Diesel filter dim.Ø ext.mm.96 Seal Ø mm. 72 height mm.120 step M 20 X 1.5, equipped with drain..
33.26€ Ex Tax: 26.82€
AIFO-LOMBARDINI diesel filter (for motors a-M20-M40 8040-8060-TURBO) FORD (engine 54HP) N (for engines 6.660 4.440 E-and-REF. or. 51.12503-0018) PERKINS (for engines BEFORE M25-M50-M60-M80T-4CL (2, 0L))..
12.59€ Ex Tax: 10.15€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
1.93€ Ex Tax: 1.56€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.13€ Ex Tax: 1.71€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.51€ Ex Tax: 2.03€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.71€ Ex Tax: 2.18€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.90€ Ex Tax: 2.34€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
3.09€ Ex Tax: 2.49€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
3.67€ Ex Tax: 2.96€
Full strip DIN 3017 standard clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
3.87€ Ex Tax: 3.12€
Full strip DIN 3017 thin clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
1.35€ Ex Tax: 1.09€
Full strip DIN 3017 thin clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
1.74€ Ex Tax: 1.40€
Full strip DIN 3017 thin clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
1.93€ Ex Tax: 1.56€
Full strip DIN 3017 thin clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.13€ Ex Tax: 1.71€
Full strip DIN 3017 thin clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.13€ Ex Tax: 1.71€
Full strip DIN 3017 thin clamp. Stainless Steel strip, housing and screw. Smooth edges, does not damage clamped hoses...
2.32€ Ex Tax: 1.87€
Stainless Steel DIN 963 A2 metric slotted head machine screws...
15.68€ Ex Tax: 12.65€
Stainless Steel DIN 963 A2 metric slotted head machine screws...
25.83€ Ex Tax: 20.83€
Stainless Steel DIN 963 A4 metric slotted head machine screw...
18.32€ Ex Tax: 14.77€
Stainless Steel DIN 7981 A4 pan head tapping screw phillips...
17.26€ Ex Tax: 13.92€
Stainless Steel DIN 7981 A4 pan head tapping screw phillips...
15.15€ Ex Tax: 12.22€
Stainless Steel DIN 7981 A4 pan head tapping screw phillips...
17.79€ Ex Tax: 14.35€
Stainless Steel DIN 7981 A4 pan head tapping screw phillips...
10.72€ Ex Tax: 8.64€
Stainless Steel DIN 7981 A4 pan head tapping screw phillips...
10.41€ Ex Tax: 8.40€
High resistance 1100D PVC mesh compact tender with high-pressure rigid air floor that ensures stabile and confortable surface but also sailing stability. Standard equipment: paddles, adjustable bench, inflator pump, repair kit and 80 x 40 x 50 cm carry bag...
1,167.27€ Ex Tax: 941.35€
High resistance 1100D PVC mesh compact tender with high-pressure rigid air floor that ensures stabile and confortable surface but also sailing stability. Standard equipment: paddles, adjustable bench, inflator pump, repair kit and 80 x 40 x 50 cm carry bag...
1,389.61€ Ex Tax: 1,120.65€
Disassembling Anodized Aluminum kayak paddle with reinforced Plastic blades...
57.46€ Ex Tax: 46.34€
Disposable latex gloves. Ambidextrous, with rolled edge and starch talc. 100 Pieces pack...
16.87€ Ex Tax: 13.60€
Marine grade Almag 35 powder coated white Aluminum foldable cleat for docks, pontoons and fishing boats. 2 or 3 Mounting holes base...
78.80€ Ex Tax: 63.55€
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 45/55 Tonnes, Tbreaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
1,000.52€ Ex Tax: 806.87€
Dockwheel protection PVC guard for docks. Support not included. It allows smooth passing of boats during mooring...
28.20€ Ex Tax: 22.74€
Ball bearing HS blocks for sheets up to 6 mm. Stainless Steel ball bearings and cheeks, plastic sheave. Sheave diameter 19 mm. Breaking load 450 Kg...
43.88€ Ex Tax: 35.39€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
114.78€ Ex Tax: 92.56€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
186.47€ Ex Tax: 150.38€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
229.30€ Ex Tax: 184.92€
Female double coupling suitable to connect two sections of cable with PL259 plug (male) to extend the antenna cables, or repair a broken cable..
3.04€ Ex Tax: 2.45€
Stainless Steel casing 12V double compact electric horn...
66.11€ Ex Tax: 53.31€
TCD Quick control panels with push-buttons or Joysticks for operating bow-thruster propellers. Simple and intuitive user interface. Universal 8-30 Vdc power supply. Possibility of connecting several TCD controls in parallel. Easy to install thanks to the 2-wire connector (optional extensions). Automatic priority system and disablement. Protection against reverse polarity, short circuit output, prolonged activity of motor and interruption of thruster controls wiring...
489.14€ Ex Tax: 394.47€
Chromed brass twin control, throttle + gearbox for one engine.Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables.Dims. mm. A=75 B=165 C=137 D=95 E=130 F=110..
234.04€ Ex Tax: 188.74€
