Bravo BP12 air pump with automatic stop when selected pressure is reached. Comes complete with aspirating filter, valve adapters, shoulder bag, 1.7 meters tube and 3 meters cable. 12V cigarette lighter plug or battery clamps power supply. Dimentions: 19 x 10 x 13 cm...
Pressure Selection Facilitated With This Specialmanometer. Flow L/min: 450/160. Automaticstop When Selected Pressure Is Reached, Max0,95 Bar (13,8 Psi). Power Supply 12v, Consumptionmax. 20a. Equipped With Connectorsfor Dinghies And Kites With Shoulder Bag.dims. Mm. 205x105x130h....
Bronze gear pump for diesel transfer complete with filter. 1826314 with 2 pcs 3/8" x 13 mm pipe-to-hose 1826328/29 with 2 pcs 1/2" x 14 mm pipe-to-hose..
Bronze Stuffy Box support complete with water lubricated stern tube bearing. Recessed part is already threaded to suit 25 to 50 mm propeller shaft sterntubes. Endowed with water lubrication pipe-to-hose. Replaces traditional flexible and rigid shaft seal systems. To be completed with Stuffy Box seal...
Portable automated equipment for filling and bleeding of hydraulic systems contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. Possible to connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of:- unit equipped with a safety valve, switch, 5 liter tank and electric motor 12V 8A.- electric cable mt. 4 full clips for connecting to the battery...
Built-in air horn with grillEnclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output whenpressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerfulsound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies. Dim.mm.134x195x167..
Built-in air horn with grillEnclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output whenpressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerfulsound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies. Dim.mm.134x195x167..
Inflatable buoy for mooring or signaling with through hole, thick walls, reinforced ends, orange color.Mod. CC2, Ø Ext. mm. 385, Heig. mm. 430, Ø Int hole mm. 48, Weight kg. 2,6...
Nautic Boiler water heater designed for marine use.
Works at shoreside or using a generator at 1200W-220V electric resistance or, thanks to a special enveloping type heat exchanger, with engine's cooling circuit heat. Maintains water drinkable. Anode against electrolysys effect included. 316 Stainless Steel tank and insulation casing.
3 Years warranty.
To be completed with mixing valve kit...
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. the steering box is already fitted with TM86 cable, it has to be equipped with G86 shaft (4343100).Made exclusively in corrosion resistant materials, all stainless steel cable output ends. Lock-to-lock steering wheel turns: 3,5. Stroke: 210 mm (8.2). Exceeds EN 28848 and ABYC P17 safety standards..
Calibrated chain and top quality 3-strand Polyester rope spliced for windlasses.
Perfect connection system between rope and chain with slimmer and more tapered splice
preventing the jamming on the gypsy...
Calibrated chain and top quality 3-strand Polyester rope spliced for windlasses.
Perfect connection system between rope and chain with slimmer and more tapered splice
preventing the jamming on the gypsy...
High quality calibrated Hot-dip Galvanized Steel chain for windlasses.
Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
High quality calibrated Hot-dip Galvanized Steel chain for windlasses.
Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...
High quality calibrated Hot-dip Galvanized Steel chain for windlasses.
Minimum breaking load ensured thanks to the strictly controlled production.Bundle: 30,50,75 or 100 meters...