-
Your shopping cart is empty!
Your shopping cart is empty!
Electro-hydraulic lift for outboard engines. Built in 6061 T6 aluminum alloy and stainless steel screws. Tank, Pump and plumbing pipes are containedinside Thanks to the remarkable ability to lift is suitable for all 3/4/6 cylinder engines. He has no problem to lift a V6 300HP at full throttle.Complete with position indicator and control panel. Voltage 12V. Lifting Capacity 350Kg, range mm.127. ledge mm.140....
2,556.88€ Ex Tax: 2,062.00€
Dressing ship complete with 40 international code flags supplied with braidedropes. Made of 100 % polyester bunting...
370.96€ Ex Tax: 299.16€
Dressing ship complete with 40 international code flags supplied with braidedropes. Made of 100 % polyester bunting...
116.95€ Ex Tax: 94.32€
Dressing ship complete with 40 international code flags supplied with braidedropes. Made of 100 % polyester bunting...
38.04€ Ex Tax: 30.68€
Dressing ship complete with 40 international code flags supplied with braidedropes. Made of 100 % polyester bunting...
170.32€ Ex Tax: 137.36€
Collar anode for Buck Sail-Drive engines. Zn = Zinc..
56.80€ Ex Tax: 45.80€
Collar anode for Kamewa A series hydrojets...
57.85€ Ex Tax: 46.65€
Collar anode for Kamewa A series hydrojets...
69.71€ Ex Tax: 56.22€
Collar for SAIL DRIVE 130/150 HP 2002-2003 (Or. Ref. 3888305-3888306)..
86.23€ Ex Tax: 69.54€
Two pieces collar for SD 20-30-40-50-60 engine(Or. Ref. 196440-02660)..
44.68€ Ex Tax: 36.03€
Collar For Duo Prop 290 (or. Ref. 875821)..
29.68€ Ex Tax: 23.94€
Premium quality motor covers for outboard motors, made of the same fabric which is used for soft and sturdy Fendress fender covers. Protects from rubbing wear, from weathering, bumps, scratches, UV rays and it might even be left on the motor while cruising. Fenboard Covers are made of breathable fabric (do not create condensation) and do not fade. Machine wash and quick drying. With the Fendboard motor cover your outboard motor will remain as new for longer. Attention: fitting and sizes will n..
74.87€ Ex Tax: 60.38€
Fiberglass antennas for marine use 100% waterproof. This is made possible by a special resin injected in pressure inside of the stylus. It forms a waterproof layer which, in addition to ensuring a waterproofing total water, gives a higher strength to the antenna. The special UV coating retains the bright color over time avoiding deterioration. 50 W Max power, 5 m cable, 3 db gain...
56.79€ Ex Tax: 45.80€
Fiberglass antennas for marine use 100% waterproof. This is made possible by a special resin injected in pressure inside of the stylus. It forms a waterproof layer which, in addition to ensuring a waterproofing total water, gives a higher strength to the antenna. The special UV coating retains the bright color over time avoiding deterioration. 50 W Max power, 5 m cable with 3 db gain. Don't cut cable..
49.84€ Ex Tax: 40.19€
VHF antenna made with Fast FIt system (removable screw-type) in chrome-plated brass and seals, ensuring maximum protection of the connector from external agents. Standard 1 "x 14 thread connection..
127.28€ Ex Tax: 102.65€
Premium quality motor covers for outboard motors, made of the same fabric which is used for soft and sturdy Fendress fender covers. Protects from rubbing wear, from weathering, bumps, scratches, UV rays and it might even be left on the motor while cruising. Fenboard Covers are made of breathable fabric (do not create condensation) and do not fade. Machine wash and quick drying. With the Fendboard motor cover your outboard motor will remain as new for longer. Attention: fitting and sizes will n..
74.87€ Ex Tax: 60.38€
Switchblade knife with blade lock. Stainless Steel W1.4034 jagged rounded blade. Complete with bottle opener, shackle opener hole and hollow fid. Nylon and TPE Fiberglass reinforced handle...
39.40€ Ex Tax: 31.78€
Professional diving knife with line cutter and back hammer. Complete with sheath and belt. Stainless Steel W1.4116 blade. Blade should be rinsed with fresh water and greased after use...
65.76€ Ex Tax: 53.03€
In nylon with handle. Dim. cm. 30X22X35..
12.03€ Ex Tax: 9.70€
Mesh bottom for water draining. Mesh front pocket for small objects. Mounting with 4 suction cups (included) or with 4 SS eyelets. Dim. cm. 31X37..
43.65€ Ex Tax: 35.20€
Mounting to the pulpit or to the stays by means of its flap with Velcro or of its ribbons with buckle (included). Mesh bottom for water draining. Dim. cm. 37X37X10..
34.13€ Ex Tax: 27.53€
Automatic water in/out cycle control Ocean Evolution toilet. Thanks to the new pump the toilet is silent as the depression toilets. Very low water consumption. Complete with soft closing hinges seat. The macerator pump allows the drainage of waste up to 4 meters in height and 40 meters in distance and is complete with duck non-return valve that prevents any return. Discharging occurs with 360° orientable 38 mm (1"1/2) adjustable to 25 mm (1") port connection...
536.38€ Ex Tax: 432.56€
Comfortable (feels like home) seat Porcelain bowl and base electric toilet. Equipped with control panel and combined pump unit for aspiration and centrifugal shredder action. Easy to install. Inlet ø 20 mm / outlet ø 25-38 mm...
534.65€ Ex Tax: 431.17€
Comfortable acrylic fabric cushion. Water-repellent and UV rays resistant. The stable indelible colors remain lively for at least 3 years of continuous use. Endowed with velcro in order to put together more cushions. Washable cover with zipper...
52.05€ Ex Tax: 41.98€
Comfortable acrylic fabric cushion. Water-repellent and UV rays resistant. The stable indelible colors remain lively for at least 3 years of continuous use. Endowed with velcro in order to put together more cushions. Washable cover with zipper...
34.92€ Ex Tax: 28.16€
Comfortable acrylic fabric cushion. Water-repellent and UV rays resistant. The stable indelible colors remain lively for at least 3 years of continuous use. Endowed with velcro in order to put together more cushions. Washable cover with zipper...
34.92€ Ex Tax: 28.16€
Compact diving knife with line cutter. Complete with sheath and belt. Stainless Steel W1.4028 blade. Blade should be rinsed with fresh water and greased after use...
24.50€ Ex Tax: 19.76€
Compact valve with ergonomic cap for inflatables and high pressure inflatable floors. With push opening and special high sealing capacity gasket...
13.05€ Ex Tax: 10.52€
Complete kit for fiberglass boats and their parts repairing...
20.95€ Ex Tax: 16.90€
Complete kit for fiberglass boats and their parts repairing...
28.86€ Ex Tax: 23.27€
Compulsory on tender.Made of 100 % polyester bunting.Pack of 10 pcs...
6.97€ Ex Tax: 5.62€
Polished Brass hub cap and conic reduction bushing for helmsmann's wheels. The bushing reduces from 25 to 19 mm (from 1" to 3/4")...
11.58€ Ex Tax: 9.34€
Screw connecting terminalsSelf-extinguishing black PVC. Easily separated..
4.98€ Ex Tax: 4.02€
Screw connecting terminalsSelf-extinguishing black PVC. Easily separated..
2.80€ Ex Tax: 2.26€
Screw connecting terminalsSelf-extinguishing black PVC. Easily separated..
2.95€ Ex Tax: 2.38€
VHF Coaxial cables (50 Ohm) connectors and protections...
11.41€ Ex Tax: 9.20€
VHF Coaxial cables (50 Ohm) connectors and protections...
19.31€ Ex Tax: 15.57€
Console covermade of 100% RAL 91015 white polyester fabric, waterproof complying with the UNI EN 24920 standard. It ensures a high level of protection and resistance to exposure to UV rays and marine corrosive agents...
80.77€ Ex Tax: 65.14€
Console covermade of 100% RAL 91015 white polyester fabric, waterproof complying with the UNI EN 24920 standard. It ensures a high level of protection and resistance to exposure to UV rays and marine corrosive agents...
84.31€ Ex Tax: 67.99€
Vinyl coated polyester cover for console boats and rafts, UV resistant. Cover white...
205.55€ Ex Tax: 165.77€
Bestseller
Couple of stainless steel pot-holdersfor art. 2424002-2424049..
81.30€ Ex Tax: 65.56€
Cooling pump for Lister Petter / Nanni / Mitsubishi / Ruggerini engines...
215.04€ Ex Tax: 173.42€
Premium quality motor covers for outboard motors, made of the same fabric which is used for soft and sturdy Fendress fender covers. Protects from rubbing wear, from weathering, bumps, scratches, UV rays and it might even be left on the motor while cruising. Fenboard Covers are made of breathable fabric (do not create condensation) and do not fade. Machine wash and quick drying. With the Fendboard motor cover your outboard motor will remain as new for longer. Attention: fitting and sizes will n..
74.87€ Ex Tax: 60.38€
High quality Polyester fabric flags...
9.42€ Ex Tax: 7.60€
High quality Polyester fabric flags...
10.42€ Ex Tax: 8.41€
