-
Your shopping cart is empty!
Drilled water intake "speedy" series..
23.50€ Ex Tax: 18.96€
Brass elbow latch for doors and cabinets. Used with thru-hole handles or through a simple hole in the hatch...
10.11€ Ex Tax: 8.16€
Ground Brass. plate to connect through hulls and intake strainers...
18.25€ Ex Tax: 14.72€
Ground Brass. plate to connect through hulls and intake strainers...
18.25€ Ex Tax: 14.72€
Ground Brass. plate to connect through hulls and intake strainers...
16.73€ Ex Tax: 13.49€
Ground Brass. plate to connect through hulls and intake strainers...
18.25€ Ex Tax: 14.72€
Ground Brass. plate to connect through hulls and intake strainers...
50.19€ Ex Tax: 40.48€
Ground Brass. plate to connect through hulls and intake strainers...
41.06€ Ex Tax: 33.12€
Ground Brass. plate to connect through hulls and intake strainers...
63.88€ Ex Tax: 51.51€
Ground Brass. plate to connect through hulls and intake strainers...
18.25€ Ex Tax: 14.72€
Ground Brass. plate to connect through hulls and intake strainers...
14.90€ Ex Tax: 12.02€
Complete chrome rowlock with support 52x14mm..
15.55€ Ex Tax: 12.54€
Brass Tee fitting with fittings for copper pipe..
11.09€ Ex Tax: 8.94€
Brass Tee fitting with fittings for copper pipe..
13.86€ Ex Tax: 11.18€
Tee 1/ 4 gas fitting, Nickel plated brass, for plastic hose Ø 6x8 mm. thread,or copper tube Ø 8 mm...
44.34€ Ex Tax: 35.76€
Cap Horizon (by Barigo) weather instruments with Polished Brass case...
96.20€ Ex Tax: 77.58€
One side threaded Brass tubing for propeller shaft sterntubing. All diameter tubing with 300 cm length are sold without thread...
1,505.01€ Ex Tax: 1,213.72€
One side threaded Brass tubing for propeller shaft sterntubing. All diameter tubing with 300 cm length are sold without thread...
337.83€ Ex Tax: 272.45€
One side threaded Brass tubing for propeller shaft sterntubing. All diameter tubing with 300 cm length are sold without thread...
892.34€ Ex Tax: 719.63€
One side threaded Brass tubing for propeller shaft sterntubing. All diameter tubing with 300 cm length are sold without thread...
1,513.66€ Ex Tax: 1,220.69€
220V Brass body fixed wall light with wheel and shade...
168.02€ Ex Tax: 135.50€
Bravo BP12 air pump with automatic stop when selected pressure is reached. Comes complete with aspirating filter, valve adapters, shoulder bag, 1.7 meters tube and 3 meters cable. 12V cigarette lighter plug or battery clamps power supply. Dimentions: 19 x 10 x 13 cm...
203.28€ Ex Tax: 163.94€
Pressure Selection Facilitated With This Specialmanometer. Flow L/min: 450/160. Automaticstop When Selected Pressure Is Reached, Max0,95 Bar (13,8 Psi). Power Supply 12v, Consumptionmax. 20a. Equipped With Connectorsfor Dinghies And Kites With Shoulder Bag.dims. Mm. 205x105x130h....
206.69€ Ex Tax: 166.69€
Bravo OV4 - 220V powered inflator with valve adapters. Dimensions: 12 x 15 x 15 cm...
140.42€ Ex Tax: 113.25€
Pillar fairlead in composite material abrasion resistant. For clamcleat art. 7878730/5...
4.05€ Ex Tax: 3.27€
Lacing eye made in AISI 316 stainless steel for fastening straps...
14.53€ Ex Tax: 11.72€
Lacing eye made in AISI 316 stainless steel for fastening straps...
13.21€ Ex Tax: 10.65€
Pad Eye in stainless steel, diamond base. Size: Ø 8mm. A 22mm. H 20mm. base 50X80mm...
9.07€ Ex Tax: 7.31€
Full flow Bronze ball valve. Stainless Steel lever...
47.80€ Ex Tax: 38.55€
Bronze gear pump for diesel transfer complete with filter. 1826314 with 2 pcs 3/8" x 13 mm pipe-to-hose 1826328/29 with 2 pcs 1/2" x 14 mm pipe-to-hose..
268.95€ Ex Tax: 216.89€
Bronze impeller and pump with Stainless Steel shaft and electromagnetic clutch. Vertical lift max 15 m – 1400 RPM. For fresh and salt water...
1,368.78€ Ex Tax: 1,103.86€
Bronze impeller and pump with Stainless Steel shaft and electromagnetic clutch. Vertical lift max 15 m – 1400 RPM. For fresh and salt water...
1,368.78€ Ex Tax: 1,103.86€
Bronze rudder blade for boats from 7 to 9 meters. Endowed with tiller. To be completed with mount head...
939.93€ Ex Tax: 758.01€
Bronze rudder blade for boats from 7 to 9 meters. Endowed with tiller. To b completed with mount head...
908.25€ Ex Tax: 732.46€
Bronze rudder blade for boats from 9 to 12 meters. Endowed with tiller. To be completed with mount head...
1,013.86€ Ex Tax: 817.63€
Bronze Stuffy Box support complete with water lubricated stern tube bearing. Recessed part is already threaded to suit 25 to 50 mm propeller shaft sterntubes. Endowed with water lubrication pipe-to-hose. Replaces traditional flexible and rigid shaft seal systems. To be completed with Stuffy Box seal...
371.19€ Ex Tax: 299.35€
Bronze/rubber shaft bearing hydro lubrificated. Special type. Metric Ø internal and external..
54.80€ Ex Tax: 44.20€
Brush with long wooden handle. Pure blond professional bristles 10 mm thickness...
3.51€ Ex Tax: 2.83€
Brush with long wooden handle. Pure blond professional bristles 10 mm thickness...
4.57€ Ex Tax: 3.68€
Brush with long wooden handle. Pure blond professional bristles 10 mm thickness...
5.45€ Ex Tax: 4.39€
Brush with long wooden handle. Pure blond professional bristles 10 mm thickness...
6.50€ Ex Tax: 5.24€
Portable automated equipment for filling and bleeding of hydraulic systems contained in a handy portable box on wheels. Allows a single operator to perform in less than 5 minutes without filling or draining of oil leaks. Possible to connected to all cylinders whose connections are with a quick-vent systems and type DN5 Teleflex. The kit consists of:- unit equipped with a safety valve, switch, 5 liter tank and electric motor 12V 8A.- electric cable mt. 4 full clips for connecting to the battery...
1,222.86€ Ex Tax: 986.18€
Built-in air horn with grillEnclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output whenpressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerfulsound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies. Dim.mm.134x195x167..
85.34€ Ex Tax: 68.82€
Built-in air horn with grillEnclosure type electropneumatic horn for boats. A great innovation is the integrated compressor with horn, enabling immediate sound output whenpressing the push button. No air hosing is therefore required. ASA grille and steel bracket. Typically marine low tone and extraordinary powerfulsound. Rapid enclosure type installation. Suitable for commercial boats, ferries, yachts under 12 meters, sea dredges and rubber dinghies. Dim.mm.134x195x167..
67.45€ Ex Tax: 54.40€