Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
Removable and folding cargo boom in 316 L stainless steel, facilitates the handling of heavy and bulky loads (up to 35 kg or the equivalent of a 6 HP/4-stroke engine). Swivels on 360°. Can be mounted either on a sailing boats pushpit (Ø 22.5 to 25.5 mm) or in the cockpit. Easy to secured and quick to use. Supplied with a storage bag including: 1 rope system, 4:1 purchase (2 double blocks, 10 m braided polyethylene), 1 Plasticlip equipped with a st. steel fixing plate, 1 st. steel articulated mo..
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
Manufactured from stainless steel AISI 316. It orients the anchor in the correct position when the attack reaches the pulley of the bow. Direct connection to the anchor and chain with a universal joint. Its resistance has tripled compared to existing models. Assembled with safety screws by unscrewing the pin. Breaking load Kg.12000 overall dimensions mm. Ø.38 A.240 B.27 C.15 D.35. Recommended for anchors 30 to 50 Kg..
Manufactured From Stainless Steel Aisi 316.it Orients The Anchor In The Correct Position When The Attackreaches The Pulley Of The Bow. Direct Connection To Theanchor And Chain With A Universal Joint. Its Resistance Has Tripled Compared To Existing Models. Assembled With Safety Screws By Unscrewing The Pin. Breaking Load Kg.8500 Overall Dimensions Mm. Ø.38 A.230 B.22 C.15 D.30. Recommended For Anchors 20 To 30 Kg...
Electric blower selected by boatbuilders for its sturdy construction and durability. Suitable for use in the engine compartment, cabins and damp closets or areas.In the engine compartment : it is essential to start the blower 5 minutes before starting the engine. Its compact design allows installation in differentpositions and in space restricted areas. Can be mounted along or through a bulkhead, horizontally or vertically. An optional mounting bracketadapts the blower to all mounting possibilit..
Electric blower in strong white ABS, homologated by R.I.N.A, Complying with ISO 8846. Vane axial-flow bilge blowers designed using aerospace technology to maximize performance...
Electric blower in strong white ABS, homologated by R.I.N.A, Complying with ISO 8846. Vane axial-flow bilge blowers designed using aerospace technology to maximize performance...
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
PVC patented fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into p..
Water filter made of polypropylene, transparent cover and hose in two sizes, adaptable, cutting the part not required, according to the required flow rate. Filtering of nylon, indicated for cooling engines...
Flexible water tanks for fresh water high resistance flexible water tanks are a reliable, practical and low cost solution to the storage of fresh water on board. They are flexible, lightand form-fitting, and can therefore be installed where it would not be possible to install a rigid water tank, due to the shape of the boat or difficultaccess. The double envelope principle makes maintenance easy, as the inner chamber can be easily removed from the outerenvelope for routinecleaning and examinatio..
Extendable and closable Pop-Up pail for minimum storage space with cover and zip.
Ergonomic Stainless Steel handle, reinforced watertight Poliester fabric.
Can be used as a bag with zip closed cover...
Waterproof Foot Switch To Operate Any Type Of Electric Winch. With Plasticbase And Safety Cover In Stainless Steel To Prevent Accidentl Push-button Operationin Stainless Steel. Electrical Contact Normally Open, 12/24 V...
Waterproof Foot Switch To Operate Any Type Of Electric Winch. With Plasticbase And Safety Cover In Stainless Steel To Prevent Accidentl Push-button Operationin Stainless Steel. Electrical Contact Normally Open, 12/24 V...
Refrigerators and Freezers Drawerin Stainless Steel (INOX), Refrigerators and Freezers feature convenient drawer opening which allow an easy access to food and drinks. An extraordinarilystylish design makes these highly functional units a valuable addition to any boat...
Refrigerators and Freezers Drawerin Stainless Steel (INOX), Refrigerators and Freezers feature convenient drawer opening which allow an easy access to food and drinks. An extraordinarilystylish design makes these highly functional units a valuable addition to any boat...
Refrigerators and Freezers Drawerin Stainless Steel (INOX), Refrigerators and Freezers feature convenient drawer opening which allow an easy access to food and drinks. An extraordinarilystylish design makes these highly functional units a valuable addition to any boat...
Manufactured from a composite Kevlar/Zytal material and available in3 sizes to accept lines up to 14mm in diameter. This advanced materialoffers performance advantages over carbon fibre and conventional glassreinforcedresins, K cams are very strong, lightweight and have excellentwear-resistance.A progressive tooth design ensures maximum holding power on all typesof line, whilst maintaining minimum wear to both cam and line. Rope Ø mm.10-14. Wheelbase mm.50...
Manufactured from a composite Kevlar/Zytal material and available in3 sizes to accept lines up to 14mm in diameter. This advanced materialoffers performance advantages over carbon fibre and conventional glassreinforcedresins, K cams are very strong, lightweight and have excellentwear-resistance.A progressive tooth design ensures maximum holding power on all typesof line, whilst maintaining minimum wear to both cam and line. Rope Ø mm.6-12. Wheelbase mm.40...