-
Your shopping cart is empty!
Your shopping cart is empty!
Charge regulator for 12 V batteries Suitable for installations with multiple power sources, suchgeBlacktore mains electricity, engine driven alternator over the Aerogenor Aquagen. Recommended for single or dual battery banks. Nowithdrawal from the standby battery..
440.46€ Ex Tax: 355.21€
Bestseller
Very flexible marine copper cable for batteries, sold by mt..
14.78€ Ex Tax: 11.92€
Bestseller
Very flexible marine copper cable for batteries, sold by mt..
19.71€ Ex Tax: 15.89€
Bestseller
Very flexible marine copper cable for batteries, sold by mt..
14.78€ Ex Tax: 11.92€
Bestseller
Very flexible marine copper cable for batteries, sold by mt..
19.71€ Ex Tax: 15.89€
Electric battery isolator recommended as battery switch for thrusters. Connection to the control of the propeller which disconnects the power when it is turned off thecontrol panel...
514.89€ Ex Tax: 415.23€
Electric battery isolator recommended as battery switch for thrusters. Connection to the controlof the propeller which disconnects the power when it is turned off thecontrol panel...
533.52€ Ex Tax: 430.26€
Distributors of automatic low battery voltage drop (0.25 V). They allowyou to charge two batteries simultaneously 150AMP, providing morethan charging the battery discharged. Made of aluminum with large finsthat may effectively dissipate the heat. Dim. 230x130x70 mm...
92.38€ Ex Tax: 74.50€
Distributors of automatic low battery voltage drop (0.25 V). They allowyou to charge two batteries 50AMP simultaneously, providing morethan charging the battery discharged. Made of aluminum with large finsthat may effectively dissipate the heat. Dim. 130x130x70 mm...
51.74€ Ex Tax: 41.72€
Distributors of automatic low battery voltage drop (0.25 V). They allowyou to charge three batteries 100AMP simultaneously, providing morethan charging the battery discharged. Made of aluminum with large finsthat may effectively dissipate the heat. Dim. 230x130x70 mm...
84.53€ Ex Tax: 68.17€
Distributors of automatic low battery voltage drop (0.25 V). They allowyou to charge three batteries 50AMP simultaneously, providing morethan charging the battery discharged. Made of aluminum with large finsthat may effectively dissipate the heat. Dim. 130x130x70 mm...
55.57€ Ex Tax: 44.81€
Distributors of automatic low battery voltage drop (0.25 V). They allowyou to charge four batteries 50AMP simultaneously, providing morethan charging the battery discharged. Made of aluminum with large finsthat may effectively dissipate the heat. Dim. 230x130x70 mm...
87.12€ Ex Tax: 70.26€
Four position compact battery selector switch. Allows to isolate the battery, to select one of two batteries, or to select both of them at the same time. Surface or flush mount. Removable key. ..
32.15€ Ex Tax: 25.93€
The Quick ECS charge separators are endowed with Mosfet technology, which allows splitting the charge without causing dangerous voltage drops. They allows to increase the number of possible battery connections, safeguarding the charge of each one individually, as usually occurs with multiple-output battery chargers. Advantages: - negligible loss of voltage - input voltage from 5 to 31 V - low power dissipation - wide operating temperature range - compatibility with any type of generator..
258.11€ Ex Tax: 208.15€
The Quick ECS charge separators are endowed with Mosfet technology, which allows splitting the charge without causing dangerous voltage drops. They allows to increase the number of possible battery connections, safeguarding the charge of each one individually, as usually occurs with multiple-output battery chargers. Advantages: - negligible loss of voltage - input voltage from 5 to 31 V - low power dissipation - wide operating temperature range - compatibility with any type of generator..
269.15€ Ex Tax: 217.05€
Battery selector switchto use one or more batteries, or cut current. Max capacity: 175 Ampcontinuous, 300 Amp for 30 seconds. Brass terminals Ø mm. 10.Dim. mm. 135 x 135 x 70 h...
46.19€ Ex Tax: 37.25€
Battery switch selector to use one or more batteries and unplug the power. Fluorescentlabels visible in the dark. Terminals Ø mm. 10. Universal 6/30V, Maxcapacity: 300 Amp. continuous, 400 Amp intermittent. Dim. Ø mm.160 x 75 h...
64.67€ Ex Tax: 52.15€
Four position continuous duty battery selector switch. Allows to isolate the battery, to select one of two batteries, or to select both of them at the same time. Dim: 127 x 127 mm x H85 mm...
78.41€ Ex Tax: 63.23€
Bellows ALPHA GENERATION IIOriginal reference: 816431A1..
55.43€ Ex Tax: 44.70€
Belt cutter accessory blade for portable rope cutter device, for the product 1-B-3190003...
34.92€ Ex Tax: 28.16€
Compra Online A MITAD DE PRECIO!! Panel digital Bennet TPI 2000 Indicador Posicionamiento Flaps al Proveedor Mayorista. Venta Online de Accesorios Náuticos Europeos. Recambios de Gran Calidad para Barcos , Embarcaciones y Veleros.Haga Click para acceder a la ficha técnica del productopanel digital bennet tpi 2000 indicador posicionamiento flaps de barco, panel digital bennet tpi 2000 indicador posicionamiento flaps de embarcacion, panel digital bennet tpi 2000 indicador posicionamiento flaps de ..
473.13€ Ex Tax: 381.55€
Four position battery selector switch. Allows to isolate the battery, to select one of two batteries, or to select both of them at the same time. Wall or flush mount. Dim: 100 x 100 mm x H90 mm...
178.50€ Ex Tax: 143.95€
Battery selector switchThe patented system allows the modular installation of more switches.The knob can not be removed in the positions 1-2 and OFF, but onlyturning it 45° counterclockwise. Recessed or flush mounting (hole Ømm. 52). 200 A continuous, 1000 A during starting cycle. Connectingterminals: 3x8 mm...
69.29€ Ex Tax: 55.88€
BG 108 diaphragm motor pumpswith an aluminium gear and rubber dumpers, this pump has a gooddelivery and it runs silently. It does not need any particular maintenanceand has the same application of PK 10 pump. Capacity 20 Lt./min...
434.24€ Ex Tax: 350.20€
BG 108 diaphragm motor pumpswith an aluminium gear and rubber dumpers, this pump has a gooddelivery and it runs silently. It does not need any particular maintenanceand has the same application of PK 10 pump. Capacity 20 Lt./min...
434.24€ Ex Tax: 350.20€
Bi-component gluefor sticking on surface (yield about 1 sqm.)..
45.09€ Ex Tax: 36.36€
BI-Thermostatmonophase heating element for Quick and Sigmar water heater 220/110 V..
42.98€ Ex Tax: 34.66€
Navigation lights R.I.Na. approvalIn polycarbonate, UV rays resistant, protection grade IP56, complete with Rina certificate and 12 V. bulb...
19.40€ Ex Tax: 15.64€
Navigation lights with 12V bulb R.I.Na. approval , in polycarbonate, UV rays resistant, protection grade IP56, complete with Rina certificate..
17.47€ Ex Tax: 14.09€
Navigation lights with 12V bulb R.I.Na. approval , in polycarbonate, UV rays resistant, protection grade IP56, complete with Rina certificate..
20.72€ Ex Tax: 16.71€
A robust family of navigation lights with a wide array of options for light beams and mounting.High quality, impact & shock resistant polycarbonate. Corrosion-free, non-magnetic, seawater resistant. Fresnel lens, complete with 12 V. bulb and approval certificate.Protection grade IP56...
115.79€ Ex Tax: 93.38€
Navigation lights in high quality, impact & shock resistant polycarbonate, corrosion-free, non magnetic, seawater resistant. Complete with 12 V. bulb and approval certificate. Protection grade IP56...
77.60€ Ex Tax: 62.58€
Chromed Brass cool/warm or only cool water bidet kit for toilets. Fits any toilet seat...
186.27€ Ex Tax: 150.22€
Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...
38.19€ Ex Tax: 30.79€
Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...
36.95€ Ex Tax: 29.80€
Turbo in-line bilge blower for engine rooms, galleys and cabins. Amp draw 2,9A (12V)...
31.10€ Ex Tax: 25.08€
Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...
36.95€ Ex Tax: 29.80€
Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...
40.65€ Ex Tax: 32.78€
Turbo in-line waterproof blowers for engine rooms and cabins. Complete with 2 tie straps. Blowers designed to grant 25% more air flux than other blowers, using 40% less power. Nickel-plated motor with cap and sealed wiring for total corrosion protection...
78.94€ Ex Tax: 63.66€
High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
171.31€ Ex Tax: 138.16€
High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
147.95€ Ex Tax: 119.32€
High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
213.84€ Ex Tax: 172.45€
High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
185.09€ Ex Tax: 149.27€
High quality continuous duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flange mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
63.01€ Ex Tax: 50.82€
High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
173.23€ Ex Tax: 139.70€
High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
147.95€ Ex Tax: 119.32€
High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
274.94€ Ex Tax: 221.72€
High quality continuous duty bracket mount centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Bracket base mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
213.84€ Ex Tax: 172.45€
High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
185.09€ Ex Tax: 149.27€
High quality continuous and Heavy Duty flanged centrifugal blowers for engine rooms and bilges. Reinforced ABS case and waterproof motor. Wall flanged mount. CE certified complying ISO 9097 Marine/ISO 8846/ISO 10133/EN 55014 standards and N.M.M.A USCG 183.410 rules...
239.00€ Ex Tax: 192.74€
