-
Your shopping cart is empty!
Your shopping cart is empty!
Steering wheel in thermoplastic antishock material, soft touch grip, 3 strokes. Universal cone..
60.97€ Ex Tax: 49.17€
Mooring line made of hand-spliced medium-strength polyester double twisted 3-strand rope...
33.29€ Ex Tax: 26.85€
Mooring line made of hand-spliced medium-strength polyester double twisted 3-strand rope...
38.84€ Ex Tax: 31.32€
Mooring line made of hand-spliced medium-strength polyester double twisted 3-strand rope...
49.94€ Ex Tax: 40.27€
Mooring line made of hand-spliced medium-strength polyester double twisted 3-strand rope...
61.83€ Ex Tax: 49.86€
Braid Polypropylene Uv Resistant. Spool Mt.100..
11.28€ Ex Tax: 9.09€
The BRS SYSTEM KIT2N is designed for protection from sinking and fire of the small open boats.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT2N is 1700 litres. The weights of the displaced water (two bags) is 1700 kg. The average filling time of the one bag is 30 secs. Operation time for filling two bags and attaching the net on the boat is ~5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 lit..
995.72€ Ex Tax: 803.00€
The BRS SYSTEM KIT4 is designed for protection from sinking and fire of small boat up to 8 m long with a cabin.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT4 is 3400 litres. The weights of the displaced water (four bags) is 3400 kg. The average filling time of the one bag is 30 secs. Operation time (filling four bags) is 5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 litres.The BRS SYSTEM ..
1,091.20€ Ex Tax: 880.00€
The BRS SYSTEM KIT6 is designed for protection from sinking and fire of small boat up to 11m long with a cabin.OPERATION: The full volume of one bag is 850 litres, the total volume of the BRS KIT6 is 5100 litres. The weights of the displaced water (6 bags) is 5100 kg. The average filling time of the one bag is 30 secs. Operation time (filling four bags) is 5 min.The capacity of a one 2kg fire extinguisher sufficies to fill six buoyancy bags with the total volume of 5100 litres.The BRS SYSTEM KIT..
1,309.44€ Ex Tax: 1,056.00€
Boiler holder for swinging conditions. Fits Wallas cookers 85 Dt / 85 DP / 85 NDt / 87 D..
155.73€ Ex Tax: 125.59€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
307.64€ Ex Tax: 248.10€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
665.35€ Ex Tax: 536.57€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
479.20€ Ex Tax: 386.45€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
534.49€ Ex Tax: 431.04€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
642.83€ Ex Tax: 518.41€
The boomstrut lightweight, low profile design features two flexible coated fibreglass rods which provide the force to support the boom. Pulling theboom down with a conventional kicker causes the Boomstrut to flex upwards, releasing straightens the rods, thereby lifting and supporting theboom. The kit is supplied complete for the installation as a complement to the existing vang and consists of: 2 coated flexible fibreglass rods giving sufficient back pressure to support the boom and mainsail...
455.50€ Ex Tax: 367.34€
Bumpers designed for application on poles and mooring posts. Due to its plasticstructure wraps the entire pole making safe the docking maneuvers. Itcan also be used as a coating of the walls of tanks hauling of reduced dimensions.Fixing performed with three clamps (25mm x 1000) includedin the package. Suitable for boats with a maximum length 20 meters or60 tons. Dim. mm. 800 x 450 x 30. Weight. 1.3 kg...
104.70€ Ex Tax: 84.44€
Black anodized light alloy helm, Ø mm.16, elastomer hinge and golf grip. Lenght 910 mm ...
51.94€ Ex Tax: 41.89€
Black anodized light alloy helm, Ø mm.16, elastomer hinge and golf grip. Lenght 610 mm ...
54.72€ Ex Tax: 44.13€
High strength towrope, float, equipped with nr. 2 ultra strong carabiners. Idealfor towing up to 4 persons. Length mt. 2,64...
35.47€ Ex Tax: 28.60€
Braidpolypropylene With Polyester Core,very Versatile Suitablefor Any Type Of Use, Soft, Easy To Handle, Lightweight Andfloating...
115.95€ Ex Tax: 93.51€
Cast and polished 316 Stainless Steel 3-Way connector...
17.00€ Ex Tax: 13.71€
Cast and polished 316 Stainless Steel 3-Way connector...
18.05€ Ex Tax: 14.56€
Cup or can holder in chromed brass with two rings fromdiameter of 70 mm in satinized polycarbonate adjustable to 360 ° andanti-vibration spring locking tab..
36.95€ Ex Tax: 29.80€
Tapin chromed brass and ABS, hose 3/8.Waterpipe Ø ext. mm 6...
45.73€ Ex Tax: 36.88€
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
194.01€ Ex Tax: 156.46€
Clump rope cutter (two pieces) in stainless steel AISI 316. Nylon rope, stainless steel cables ( Ø mm. 4 - 6 ), net cutter. It is installed or uninstalled without take the propeller off...
197.70€ Ex Tax: 159.44€
Mesh bottom for water draining. Fastening with 4 suction cups (included) or with 4 eyelets. Dim. cm. 14X21..
17.13€ Ex Tax: 13.81€
Container Made Of Polyethylene. For Life-ring ø Mm. 60 - Ø Mm. 75..
213.60€ Ex Tax: 172.26€
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
25.11€ Ex Tax: 20.25€
Soft Pvc Fender Used For Impact Protection. Adaptable To Mount On The Bow, On The Stern Or On The Platform Of Boats Thanks To Its Ability To Adapt Up To 7cm. In Width, Provided With Four Holes For Fixing...
25.11€ Ex Tax: 20.25€
Lift off hinge left chromed brass, 2 holes. Dim. mm. 30X50..
9.63€ Ex Tax: 7.77€
Lift off hinge right chromed brass, 2 holes. Dim. mm. 30X50..
9.63€ Ex Tax: 7.77€
Double action Bravo 110 hand pump inflator with valve adapters, pressure gauge, filter, enlarged base and ergonomic handle. Can inflate and deflate, endowed with switch for single action to reduce force and reach high pressures...
68.88€ Ex Tax: 55.55€
SERIES 3 -Sheave size 45mm x 14mm, Max rope Ø mm. 10, Safe Working Load kg. 385, Break load kg. 770..
46.38€ Ex Tax: 37.41€
SERIES 4 - Sheave size 58mm x 17mm, Max rope Ø mm. 12, Safe Working Load kg. 630, Break load kg. 1260..
69.41€ Ex Tax: 55.97€
Double Braidpolyester Double Braid With Dyneema Sk75 Coreand External Cover In Polyester. High Tenacity, Spe-cial Manufacturing With Opposite Torsion Braid. Withcolour Flag. Suitable For Sheet, Halyard, Genoa, Spin-naker..
12.19€ Ex Tax: 9.83€
Double Braidpolyester Double Braid With Dyneema Sk75 Coreand External Cover In Polyester. High Tenacity, Spe-cial Manufacturing With Opposite Torsion Braid. Withcolour Flag. Suitable For Sheet, Halyard, Genoa, Spin-naker..
14.23€ Ex Tax: 11.47€
Double braidPolyester double braid with DYNEEMA SK75 coreand external cover in polyester. High tenacity, spe-cial manufacturing with opposite torsion braid. Withcolour flag. Suitable for sheet, halyard, genoa, spin-naker..
6.16€ Ex Tax: 4.97€
Double braidPolyester double braid with DYNEEMA SK75 coreand external cover in polyester. High tenacity, spe-cial manufacturing with opposite torsion braid. Withcolour flag. Suitable for sheet, halyard, genoa, spin-naker..
7.39€ Ex Tax: 5.96€
Double braidPolyester double braid with DYNEEMA SK75 coreand external cover in polyester. High tenacity, spe-cial manufacturing with opposite torsion braid. Withcolour flag. Suitable for sheet, halyard, genoa, spin-naker..
9.48€ Ex Tax: 7.65€
Double Braidpolyester Double Braid With Dyneema Sk75 Coreand External Cover In Polyester. High Tenacity, Spe-cial Manufacturing With Opposite Torsion Braid. Withcolour Flag. Suitable For Sheet, Halyard, Genoa, Spin-naker..
12.19€ Ex Tax: 9.83€
Exhaust siphon in high density polyethylene. Vertical installation..
93.84€ Ex Tax: 75.67€
Female snap fasteners for oversized hood head. Made of stainless steel. Max thickness: mm. 1,8 (metal) mm.2,5 (fabric). Pack of 10 pieces..
5.60€ Ex Tax: 4.52€
Bestseller
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
15.55€ Ex Tax: 12.54€
Bestseller
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
15.55€ Ex Tax: 12.54€
Bestseller
fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into place on the t..
15.55€ Ex Tax: 12.54€
Bestseller
PVC patented fendering profile tessilmare rub rail kits are easy to install on just about any boat. Their no-heating required cold fitting design with easy to bend material saves time and results in a seamless, finished look without the hassle of traditional rub rail installs. You can fit it cold just in a few steps: 1/1A - Simply install the track on the hull using standard self-tapping screws or rivets (sold separately). 2/2A - Once the track is properly fitted, the rubber profile snaps into p..
16.34€ Ex Tax: 13.18€
