-
Your shopping cart is empty!
Bellows cover trasmission Original reference: 987467/983973 for OMC and 3854127/3841481 for Volvo..
28.34€ Ex Tax: 22.86€
Bellows cover trasmissionfor shaft SX A / DPS AOriginal reference: 3888916..
40.91€ Ex Tax: 32.99€
Strong fleece Fendress fender covers for Mega Fender fenders. Protects Mega Fenders eliminating wear, scuffy marks and squeaks. Soft and tough, they don't stain the sides and they last longer...
374.94€ Ex Tax: 302.37€
Nylon cowl vent for a good airing. Put on deck hatch and hanged to ahalyard through the included eyelet. Complete with case...
55.43€ Ex Tax: 44.70€
316 Stainless Steel Carabiner with wide side opening and eye. Antigrip hooking system. Avoids tangling of lines...
23.00€ Ex Tax: 18.55€
Chromed Brass body wire seals with watertight rubber through-deck seal. It allows to run wires through bulkheads and decks...
7.56€ Ex Tax: 6.09€
316 Stainless Steel Carabiner with wide side opening. It prevents ropes from tangling...
9.42€ Ex Tax: 7.60€
Stainless Steel round grid air vent or with adjustable closing system...
8.75€ Ex Tax: 7.05€
Stainless Steel round grid air vent or with adjustable closing system...
6.33€ Ex Tax: 5.10€
Plastic spare blades for oars and paddles...
11.09€ Ex Tax: 8.94€
Plastic spare blades for oars and paddles...
11.09€ Ex Tax: 8.94€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc.4809212 inner disc diameter: 127 mm...
237.20€ Ex Tax: 191.29€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc.4809212 inner disc diameter: 127 mm...
373.07€ Ex Tax: 300.86€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
410.62€ Ex Tax: 331.15€
Damper plates for medium and large engine gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
473.22€ Ex Tax: 381.63€
Damper plates for gearboxes Twin Disc/Technodrive – Warner - Hurth etc...
592.27€ Ex Tax: 477.64€
Galvanized Steel Danforth Achor. Weight Kg.20. Overall Dimensions Mm A.720 B.650 C.400..
125.98€ Ex Tax: 101.60€
Galvanized Steel Danforth Achor. Weight Kg.25. Overall Dimensions Mm A.750 B.680 C.440..
159.57€ Ex Tax: 128.69€
Galvanized Steel Danforth Achor. Weight Kg.4. Overall Dimensions Mm A.510 B.410 C.260..
22.68€ Ex Tax: 18.29€
Galvanized Steel Danforth Achor. Weight Kg.6. Overall Dimensions Mm A.570 B.440 C.300..
34.43€ Ex Tax: 27.77€
Galvanized Steel Danforth Achor. Weight Kg.8. Overall Dimensions Mm A.630 B.470 C.340..
50.39€ Ex Tax: 40.64€
Danfoss electronic control unit allowsyou to power refrigerators INDEL 12/24V...
29.96€ Ex Tax: 24.17€
Fork for gas spring in stainless steel. Size mm. 54x25x29..
11.09€ Ex Tax: 8.94€
High strength resin Ball Bearing Mini Snatch Block D=32 mm. It can be fastened both with a line or with a shackle. The Snap Ring is a line loop with an easy locking system to avoid accidental opening...
38.87€ Ex Tax: 31.35€
The cheekplate revolves around the sheave axle allowing the block to open; a safety ball prevent the block from opening and an adjustable screw allows to set the ball on locked position. There is a becket for the “hanging line”. Material: sheave with composite fibre main bearing and double side ball bearing. Hard anodized and teflon coated aluminium cheekplates with side rubber protections (yellow rubber on the revolving cheekplate)...
220.73€ Ex Tax: 178.01€
Specific detergent for descaling surfaces in contact with salt water, specially from keels and stern drives...
13.42€ Ex Tax: 10.82€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
18.48€ Ex Tax: 14.90€
Double contact BAY15 bayonet base vertical genuine DHR bulbs for navigation lights of boats over 12 mt: DHR - Hella - Aqua Signal...
19.71€ Ex Tax: 15.89€
Navigation lights R.I.Na. approvalBlack reinforced polycarbonate, stainless steel wall bracket complete with certificate of approval.Supplied without bulb Fresnel lens-resistant polycarbonate...
87.59€ Ex Tax: 70.64€
Diaphragm water pressure system has the character- istics of PK 10pump but is equipped with a pressure switch that allows the use in thepressurized system as an autoclave. Capacity 10 Lt./min...
390.51€ Ex Tax: 314.93€
Diaphragm pumps for waste water discharge. Particularly suitable to empty the holding tanks. Conforms USCG 183.410 and ISO 8846 Marine (Ignition Protection) and ISO 8849 Marine (standard bilge pump). 360 ° rotating head offers multiple installation options. It can run dry for long periods without damage..
347.65€ Ex Tax: 280.36€
Diesel filter dim.Ø ext.mm.96 Seal Ø mm. 72 height mm.120 step M 20 X 1.5, equipped with drain..
33.26€ Ex Tax: 26.82€
Stainless Steel DIN 963 A2 metric slotted head machine screws...
15.68€ Ex Tax: 12.65€
Stainless Steel DIN 963 A2 metric slotted head machine screws...
25.83€ Ex Tax: 20.83€
Disassembling Anodized Aluminum kayak paddle with reinforced Plastic blades...
57.46€ Ex Tax: 46.34€
Mooring Springs With Very High Resistance Andvery High Technology Components. High Resistance Stainless Steel : 120/140 Kg. Mm2, Lengthening Limiters In Special Nylon. Elastomer Of Special Quality : From -40° C Up To +120° C, Suitable For No. 400.000 Cycles. Spring Diameter Ø Mm. 100, Length Mm. 460, Extension Mm. 140, For Boats Up To 45/55 Tonnes, Tbreaking Load Kg. 27000, Working Load Kg. 14000, Spring Weight 4 Kg..
1,000.52€ Ex Tax: 806.87€
Dockwheel protection PVC guard for docks. Support not included. It allows smooth passing of boats during mooring...
28.20€ Ex Tax: 22.74€
Ball bearing HS blocks for sheets up to 6 mm. Stainless Steel ball bearings and cheeks, plastic sheave. Sheave diameter 19 mm. Breaking load 450 Kg...
43.88€ Ex Tax: 35.39€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
114.78€ Ex Tax: 92.56€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
186.47€ Ex Tax: 150.38€
One piece tefloned black Oxidised Aluminum frame very robust block without screws and pins. With resin sheaves and double selfcaptive ball bearing that does not need lubrication. Complete with high resistance Stainless Steel screws. The high quality materials guarantee high work loads and extra lightness...
229.30€ Ex Tax: 184.92€