Stainless steel telescopic ladder, for scrolling fixing on or under theplatform. Suitable for motorboats. Steps with non-skid platform in blackplastic, fitted with sliding guide, application under the platform. Equippedwith telescopic tilting system that allows the output of the steps...
Conical card graduated every 5° apparent Ø 70 mm. Heading numerals every 30°. For motor boat from 5 to 8 mt.. Included 1 bulb 12 Vdc .Installation: Mini-binnacle for horizontal surface..
Conical card graduated every 5° apparent Ø 70 mm. Heading numerals every 30°. For motor boat from 5 to 8 mt.. Included 1 bulb 12 Vdc .Installation: Mini-binnacle for horizontal surface..
Refrigerators in stainless steel. The door is flush with the mounting flange. The closure is ensured by an integrated snap closure. The interiors have special steel. Voltage 12/24V. The hermetic Danfoss BD35F electronic adapts automatically to the voltage supplied. They have a new ventilation system built into the cabinet, thus eliminating all the problems related to ducts and vents internal and external. The door is gray and designed to open left or right..
Indicator panellevel drinking water tank with light signals. Dim. mm. 60x60, complete with probe withstainless steel rods reducible for an adaptation to all tanks of maximum height 40 cm,mounting flange Ø mm. 79.5 (cutting Ø mm.59) and mt. 4 of cable...
Trim tabs angle LED indicator 2 scales with red LED, can be seen also with sun. Complete with feeder. Flush mount Ø mm. 52. To combine with art 5454823..
The Wallas 1300 is an ideal heater to heat one roomy cabin or cockpit.
It's a very compact heater and has everything you need in one body:
fuel pump, control switch, and warm air grill. The heater is thus
extremely easy to install.
Thanks to the laminar burn process
the sound level is very low. Furthermore there is no combustion noise,
so the boat next to yours can also enjoy the silence of nature.
..
The quiet and powerful Wallas 2000t is designed for 6-10 meter motor and sail boats. The unit operates on its own dedicated light petroleum tank.Thanks to the laminar burn process
the sound level is very low. Furthermore there is no combustion noise,
so the boat next to yours can also enjoy the silence of nature.
..
It can be used either as a drifting buoy, or as a traditional regatta buoy, with the additional advantage of small dimensions and ease of use. In sturdy and rigid PVC 1100 Decitex. Bright yellow colour for good visibility. Little drifting in the wind, the buoy stands vertically thanks to the ballast bag at the bottom and to a high immersed section (52 cm). Quick inflating and deflating. Easy to hoist back on board thanks to numerous grab handles. Easy to carry thanks to its small dimensions when..
Deodorizes and disinfects the pipes and bowl of your toilet. Easy assembly on all 15-19 mm. pipes. Operates alone with each use of the pump, electric and manual WC. Up to 400 uses. Refillable. Without formaldehyde. Purytec with installation kit 100 ml...
AISI 316stainless steel and Blackline PVC platform.Designed to withstand heavy loads, with sailing performance in focus. Designed for Code 0 and gennaker sails. With a stripped-down racing design, it is the perfect option for sailors who aim for an ultimate sailing experience, still enjoying full comfort and safety while getting onboard or off the boat. Also ideal to upgrade your boat with an asymmetrical spinnaker. Existing bow roller can be maintained, as the mooring line can be fed through th..
1-burner hob/sinkcombination (output 1000W) with sink and tempered glass lid with removablechrome grille, stainless steel burners, safety ignition system,integrated controls, piezo ignition and predisposition with tap hole Ømm.39. Dim. mm. width 525 x height 125 x depth 421. Weight. 3,8 Kg.CE Certification...
Glass or can holderin AISI 316 stainless steel. Dimension for ring Ø inner mm. 50,8 thickness mm.7,9, depth mm104,8. Fixing with studs length mm. 63,5...
Rubber transmission for metric propeller shafts, for perfect sealing and perfect lubrication. Replaces the traditional braid prize. Thanks to the compact design, it is also suitable for small spaces. The length of the support frame must be at least mm. 38. We recommend applying grease every 200 hours of use and replacement after 4 years or 500 hours of exercise. Kit consisting of: 1 plastic protection ring, 1 stainless steel strap, 1 "evo" rubber coupling, 1 grease tube with nozzle, 1 brass cap,..
Rubber transmission for metric propeller shafts, for perfect sealing and perfect lubrication. Replaces the traditional braid prize. Thanks to the compact design, it is also suitable for small spaces. The length of the support frame must be at least mm. 38. We recommend applying grease every 200 hours of use and replacement after 4 years or 500 hours of exercise. Kit consisting of: 1 plastic protection ring, 1 stainless steel strap, 1 "evo" rubber coupling, 1 grease tube with nozzle, 1 brass cap,..
Rubber transmission for metric propeller shafts, for perfect sealing and perfect lubrication. Replaces the traditional braid prize. Thanks to the compact design, it is also suitable for small spaces. The length of the support frame must be at least mm. 38. We recommend applying grease every 200 hours of use and replacement after 4 years or 500 hours of exercise. Kit consisting of: 1 plastic protection ring, 1 stainless steel strap, 1 "evo" rubber coupling, 1 grease tube with nozzle, 1 brass cap,..
Rubber transmission for metric propeller shafts, for perfect sealing and perfect lubrication. Replaces the traditional braid prize. Thanks to the compact design, it is also suitable for small spaces. The length of the support frame must be at least mm. 38. We recommend applying grease every 200 hours of use and replacement after 4 years or 500 hours of exercise. Kit consisting of: 1 plastic protection ring, 1 stainless steel strap, 1 "evo" rubber coupling, 1 grease tube with nozzle, 1 brass cap,..
Rubber transmission for metric propeller shafts, for perfect sealing and perfect lubrication. Replaces the traditional braid prize. Thanks to the compact design, it is also suitable for small spaces. The length of the support frame must be at least mm. 38. We recommend applying grease every 200 hours of use and replacement after 4 years or 500 hours of exercise. Kit consisting of: 1 plastic protection ring, 1 stainless steel strap, 1 "evo" rubber coupling, 1 grease tube with nozzle, 1 brass cap,..