-
Your shopping cart is empty!
Duck & Sail provides to you and for your yacht the excellent Morse Lever Controls delivered straight from our European warehouses. Save your money for fun in the sun and order Morse Lever Controls on-line with the best price. With passion for the sea we have selected Morse Lever Controls and other quality products for sailing, water sports, power boating and various outdoor activities for you to enjoy. Buy Morse Lever Controls now and get your best deal - from sailor to sailor!
Control box, side mount port or starboard, body in ABS, hand lever in anticorodal. Suitable for any outboard motor. Suit cables : C2 – C8 – Mach Zero – 33C, with kit K25 for engines Yamaha, Suzuki, Chrysler, Mariner. Cable C5 and Mach 5 for Mercury motors, without kit. Cable C14 with kit K23 for engines OMC since 1979. Cable C16 for Marine motors without kit...
101.70€ 84.71€ Ex Tax: 68.32€
Dual Action controls box for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all c..
537.23€ 447.51€ Ex Tax: 360.90€
Top and side mount dual action controls with lever lock device and trim switch for throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the..
296.10€ 246.65€ Ex Tax: 198.91€
Double action wall mount single lever control for throttle and shift control for inboard engines. Standard equipped on Volvo and Vetus engines. Uses C2 / C8 / C33 / MACHZero control cables...
239.00€ 199.09€ Ex Tax: 160.55€
Built in cast and chrome plated aluminum, twin lever box as 4242038 but single-action (only shift)..
586.16€ 488.27€ Ex Tax: 393.77€
Dual Action controls box for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all ca..
388.29€ 323.45€ Ex Tax: 260.85€
Dual action control lever throttle and shift in one lever. Suitable for any kind of boat with hydraulic gearbox. Chrome finish. Start and warm-up by pulling out the hand levers in the neutral position. Suits cables : C2 C8 - Mach Zero C22 33C..
403.08€ 335.77€ Ex Tax: 270.78€
X12 Neutral Safety switchPrevents starting in gear. Suitable for B89, B90, B59, B58, B65, B66,B73, B74, B76, B183, B184, B85, B77, B78, B79, B99, B101, B204,B208, B301, B302..
29.48€ 24.56€ Ex Tax: 19.80€
Chromed Brass wall mount twin lever control for throttle or shift control. Uses C2 / C8 / C33 / MACHZero cables...
134.89€ 112.37€ Ex Tax: 90.62€
Single lever dual action for one engine controls for throttle and gear.Suitable for any type of boats with outboard, inboard and sterndrive equipped for power plants. Enables easy and safe shifting by preventingaccidental gear engagement unless engine is idling. Made of cast and chrome aluminum. Pull-out handle disengages shift for warm engine. Throughthe safety switch X43 art. 4242065 (optional) you get the engine to start only in neutral. Internally fitted with friction. Use the cables C2, C8 ..
335.94€ 279.84€ Ex Tax: 225.68€
Dual Action controls box with trim for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. ..
404.25€ 336.74€ Ex Tax: 271.56€
Double action control for inboard, outboard and stern drive engines throttle and shift control. Available with or without trim. Uses directly C14 / MACH14 cables or C2 / C8 / MACHZero cables with included K59 kit. C5 / C16 / MACH5 cables can be connected with K60 kit. C22 cable can be connected with K61 kit. C36 / MACH36 cables can be connected with K62 kit. With optional X12 safety switch (4620112) engine can be started only with disengaged gearbox...
518.97€ 432.30€ Ex Tax: 348.63€
Dual lever control single action, suitablefor any engine with hydraulic gear. Release on gear and adjustablefriction. Wear Cables C2 C7 C8 Mach Zero 33 C.For cable C22 kit k32 art. 4242064...
510.63€ 425.36€ Ex Tax: 343.03€
Two lever single action control, throttle + shift, bent hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forward..
345.74€ 288.00€ Ex Tax: 232.26€
Dual Action controls box with trim for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim...
709.46€ 590.98€ Ex Tax: 476.60€
Kit K22 to fit cable C22 to controls B58, B59, B204, B208, B203T, B203S...
80.57€ 67.11€ Ex Tax: 54.12€
Top and side mount dual action controls With lever lock device, hand lever withoutjut for use on sailing bofor throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be d..
218.36€ 181.90€ Ex Tax: 146.69€
Control box AISI 316 twin control, throttle + gearbox for one engine. Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables. Dims. mm. A=80 B=180 C=170 D=150 E=180 F=120..
252.62€ 210.44€ Ex Tax: 169.71€
Two lever single action control, throttle + shift straight hand levers. Each lever controls separately the throttle or the gearbox cable. Suitablefor any kind of boat with engine : outboard, inboard and stern-drive,with hydraulic gearbox. Flush mount makes them particularly suitablefor flying bridge where is more seawater splash. Made in die-castaluminium with chromed hand lever. Built in friction drag to preventthrottle creep. Gearbox lever provided with release to know exactlythe position forw..
337.20€ 280.89€ Ex Tax: 226.52€
Flush side mount control B35 for throttle or gearbox. Suits: C2 C7 C8 Mach Zero C22 33C cables...
133.09€ 110.87€ Ex Tax: 89.41€
Kit K51 connection to engine for cable C14and Mach14 to be used on single lever B89 and B90...
16.80€ 13.99€ Ex Tax: 11.28€
Stainless steel bracket for cable stop engine, throttle, fuel valves, etc. Dims. 110x48 mm. Protrusion 30 m...
48.64€ 40.52€ Ex Tax: 32.68€
B400 bulkhead control box lever dual action: gas and inverter. Modern and essential design, free of protrusions, which makes themparticularly suitable for use on sailboats. Lever and flange in stainlesssteel 316 for greater resistance to the marine environment. They can bemounted on the bulkhead right or left, horizontally or vertically. Equippedwith adjustable clutch accessible to record the accelerator. By the safetyswitch X41 (optional), the starter motor is only obtained through the inverter..
374.13€ 311.65€ Ex Tax: 251.33€
Chromed Brass top mount twin-lever single-function control with 2 cables for throttle or shift control. Uses C2 / C8 / C33 / MACHZero cables...
274.94€ 229.02€ Ex Tax: 184.70€
Dual action control lever throttle and shift in one lever. Suitable for any kind of boat with hydraulic gearbox. Chrome finish. Start and warm-up by pulling out the hand levers in the neutral position. Suits cables : C2 C8 - Mach Zero C22 33C..
586.16€ 488.27€ Ex Tax: 393.77€
Dual Action controls box with trim for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. ..
505.31€ 420.93€ Ex Tax: 339.46€
X43 Safety switch for B103, B104...
25.20€ 20.99€ Ex Tax: 16.93€
Dual action single lever for throttle and hydraulic gearbox. Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5 and C16 need kit K35 art. 4242069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting...
257.56€ 214.54€ Ex Tax: 173.02€
Two lever single action control, each lever controls separately the throttle or the gearbox cable. Flushmount makes them particularly suitable for flying bridge where ismore seawater splash. Built in die-cast varnished light alloy. Ergonomicsoft handle. Friction built in on the throttle lever. Release on thegearbox lever to know the right position of forward, neutral, reverse.Friction and release are adjustable from exterior. Safety switch C12(optional) allows starting only with gear in neutral ..
351.06€ 292.43€ Ex Tax: 235.83€
Kit K32 to fit cable C22 to controls B99, B101...
41.99€ 34.98€ Ex Tax: 28.21€
Built in cast and chrome plated aluminum for two engine..
606.38€ 505.11€ Ex Tax: 407.35€
Single lever control boxes built in chromed brass, for throttle or gearbox.Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables.Dims. mm. A=75 B=160 C=135 D=95 E=75 F=80..
156.77€ 130.59€ Ex Tax: 105.32€
Kit to fit Cable C5, C16 to control box B301 and B302 MACH5...
27.72€ 23.09€ Ex Tax: 18.62€
Dual action single lever for throttle and hydraulic gearbox. Suitable for any kind of boat with outboard motor, inboard and stern-drives. Suitable for all cables with the exception of C4 and C22. Cables C5 and C16 need kit K35 art. 4242069. Do not allow automatically gearbox clutch when throttle is not at minimum for easy and safe drive. Mounts port or starboard, horizontally or vertically. Built in die-cast aluminium, varnished. Neutral interlock feature to prevent accidental shifting...
289.75€ 241.36€ Ex Tax: 194.65€
Top and side mount dual action controls with lever lock devicefor throttle and gearbox. Suitable for any kind of boat with outboard motor, inboard, and stern-drive, with hydraulicgearbox. Mounts port or starboard, horizontally or vertically. The hub and thelever are made in die-cast aluminium and varnished. Built-in friction drag toprevent throttle creep. Warm-up are done by pulling out the hand levers. Withsafety switch X12 (optional), start can be done only with gearbox in the neutralposition...
223.96€ 186.56€ Ex Tax: 150.45€
Flushed top mount twin lever control for throttle and shift control. Uses C2 / C8 / C33 / MACHZero cables. C22 Heavy-duty cables can be used with K32 connection kit (4620032). With the optional safety switch X12 (4620112) the engine can be started only with gearbox disengaged...
386.38€ 321.86€ Ex Tax: 259.56€
B310B bulkhead Control box lever dual action: gas and inverter. Suitable for any kind of boat with outboard motor, inboard, and sterndrive,makes driving easy and safe. For side wall mounting either rightof left, horizontally or vertically. Equipped with clutch to regulate thethrottle, adjustable from the outside. Pulling-out handle disengages theinverter during the heating operation of the engine. By the safety switchX12 (optional), the starter motor is only obtained through the inverterin the n..
382.97€ 319.02€ Ex Tax: 257.27€
Stainless Steel wall mount Vetus Sisco single lever control for throttle or shift control. With safety switch which prevents engine starting with engaged gearbox...
454.67€ 378.74€ Ex Tax: 305.43€
Dual Action controls box for two engines for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all c..
646.80€ 538.78€ Ex Tax: 434.50€
Push-Pull stay rod flush mount or on bracket art. 4242900. Ideal for Throttle, stop engine, fuel valves, etc. Thread length 5 mm. Tube Ø mm. 14 Length 120 mm. Cables used C2 Mach Zero C7 C8 33C..
79.00€ 65.81€ Ex Tax: 53.07€
Dual Action controls box for one engine for throttle and gear . Suitable for any boats with outboard motor, inboard and stern drive with hydraulic gear. Easy and safe drive. Gear cannot be used when engine is not at minimum of rpm. Built in die-cast aluminium, varnished and chromed. Has a pullout clutch disengagement feature for warm-up. Optional X-12 safety switch to prevent starting in gear. Models with trim have a switch on the handle to adjust outboard motors and stern-drive trim. Use all ca..
341.54€ 284.50€ Ex Tax: 229.44€
Single action flush side mount control for throttle. Chromed brass hand levers. Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables...
62.99€ 52.47€ Ex Tax: 42.31€
Built in cast and chrome plated aluminum for one engine..
352.83€ 293.91€ Ex Tax: 237.02€
Double action control for inboard, outboard and stern drive engines throttle and shift control. Available with or without trim. Uses directly C14 / MACH14 cables or C2 / C8 / MACHZero cables with included K59 kit. C5 / C16 / MACH5 cables can be connected with K60 kit. C22 cable can be connected with K61 kit. C36 / MACH36 cables can be connected with K62 kit. With optional X12 safety switch (4620112) engine can be started only with disengaged gearbox...
768.08€ 639.81€ Ex Tax: 515.97€
Chromed brass twin control, throttle + gearbox for one engine.Suits C2 - C7 - C8 - Mach Zero - C22 - 33C cables.Dims. mm. A=75 B=165 C=137 D=95 E=130 F=110..
212.76€ 177.23€ Ex Tax: 142.93€
Control box, side mount port or starboard, body in ABS, hand lever in anticorodal. Suitable for anyoutboard motor. Suit cables : C2 C8 C7 Mach Zero 33C, with kit K25 forengines Yamaha, Suzuki, Chrysler, Mariner. Cable C4 with kit K24 for enginesJohnson, Evinrude, Selva, Volvo. Cable C5 for Mercury motors, without kit. CableC14 with kit K23 for engines OMC since 1979. Cable C16 for Marine motorswithout kit...
96.30€ 80.22€ Ex Tax: 64.69€
Kit K23 to fit cables C14 and Mach14 to controls B47/49...
21.30€ 17.74€ Ex Tax: 14.31€